• 한국대기환경학회지
• /
• 제33권2호
• /
• pp.159-173
• /
• 2017

The Weather Research and Forecast (WRF) - Community Multiscale Air Quality (CMAQ) system was applied to investigate the influence of major point sources located in Chungcheongnam-do (CN) on surface $PM_{2.5}$ (Particulate Matter of which diameter is $2.5{\mu}m$ or less) concentrations in its surrounding areas. Uncertainties associated with contribution estimations were examined through cross-comparison of modeling results using various combinations of model inputs and setups; two meteorological datasets developed with WRF for 2010 and 2014, and two domestic emission inventories for 2010 and 2013 were used to estimate contributions of major point sources in CN. The results show that contributions of major point sources in CN to annual $PM_{2.5}$ concentrations over Seoul, Incheon, Gyeonggi, and CN ranged $0.51{\sim}1.63{\mu}g/m^3$, $0.71{\sim}1.62{\mu}g/m^3$, $0.63{\sim}1.66{\mu}g/m^3$, and $1.04{\sim}1.86{\mu}g/m^3$, respectively, depending on meteorology and emission inventory choice. It indicates that the contributions over the surrounding areas can be affected by model inputs significantly. Nitrate was the most dominant $PM_{2.5}$ component that was increased by major point sources in CN followed by sulfate, ammonium, and others. Based on the model simulations, it was estimated that primary $PM_{2.5}$ $(PPM)-to-PM_{2.5}$ conversion rates were 41.3~50.7 ($10^{-6}{\mu}g/m^3/TPY$) for CN, and 12.4~18.3 ($10^{-6}{\mu}g/m^3/TPY$) for Seoul, Incheon, and Gyeonggi, respectively. In addition, spatial gradients of PPM contributions show very steep trends. $NO_X$-to-nitrate conversion rates were 7.61~12.3 ($10^{-6}{\mu}g/m^3/TPY$) for CN, and 3.94~11.3 ($10^{-6}{\mu}g/m^3/TPY$) for the sub-regions in the SMA. $SO_2$-to-sulfate conversion rates were 4.04~5.28 ($10^{-6}{\mu}g/m^3/TPY$) for CN, and 3.73~4.43 ($10^{-6}{\mu}g/m^3/TPY$) for the SMA, respectively.

• Journal of Information Technology Applications and Management
• /
• 제26권4호
• /
• pp.51-69
• /
• 2019

One of the most considerate phenomena of the era of the Fourth Industrial Revolution is the use of digital devices. Digitalization is rapidly advancing through all areas of industry and life. Customer journey with digitalization is looking totally different from previous customer journey. The research targets were users of fashion, automobiles, cosmetics and online shopping malls. We analyzed 300 people for each valid questionnaire. The results of the study are as follows. First, it has been proven that digital experience affects positive (+) impact on purchasing intention and positive (+) impact on recommending intention and negative impact (-) on switching intent and subsequently affects positive impact (+) to purchase and incase of switching intent, negative impact (-) to purchase. Unlike traditional methods such as SPC(Service Profit Chain), the Digital experience to Purchase process Chain (DPC) has been identified to be suitable in the digital age. Second, the digital satisfied group (5 score-very satisfaction) has shown same result as above. However the digital neutral group (even though 4 score- satisfaction in five-point scale), specially in a highly competitive industry, has different from the satisfied group and 3 score-normal is same as dissatisfied group. It means that this group is that If there is a high level of attractiveness of substitute goods, there is a high possibility of switching them. It has supported Jones and Sasser [1995] that there have been two types of loyalty of true long-term loyalty and what we call false loyalty in the highly competitive industry zone which is commoditization or low differentiation, many substitutes, low cost of switching. Identifying true loyalty and false loyalty is crucial to establishing a customer experience strategy. it is necessary to actively utilize long-term digital experiences strategy to increase the total satisfaction of digital experience through all of customer purchasing journey in order to enhance the digital customer experience. It is difficult to see the effect as a one-time event. It should be scaled over the entire customer purchase process over a long period of time, which can positively affect purchase intention, recommendation intention, and conversion intention. This is also why it is difficult for second-runners to overtake first-runners in a short period.

• 환경영향평가
• /
• 제19권3호
• /
• pp.271-279
• /
• 2010

We conducted a quantitative human health risk assessment with respect to inhalation of heavy metals for residents of housing developments in "new towns" where an incinerator will be operated within the area scheduled for construction thereof. To assess potential human health risk we calculated the amount of heavy metals emitted from the incinerator, and then forecasted the potential health impact on adjoining areas where new housing is to be developed (i.e. "new towns") at different altitudes by a using SCREEN-3 model. We assessed Cancer Risk (CR) caused by known carcinogens using the Inhalation Unit Risk criteria developed by the US Environmental Protection Agency. Notably, we assessed risk by determining concentrations of heavy metals on a floor by floor basis, as apartment buildings are to be constructed near the incinerator according to a pre-devised plan. Results indicated that cancer risk for most carcinogens exceeded US EPA standards for the highest locations at each collection point. This result indicates that construction of high buildings in areas adjoining incinerators is undesirable, and that measures to lower carcinogens are needed. The results of this study, which assessed health risk from exposure to heavy metals emitted from a nearby incinerator, can be useful in land use planning with respect to the location of housing developments in new towns, as well as the heights of any buildings constructed. Furthermore, the methodology deployed herein with respect to risk assessment can be helpful for policy makers and the general public in the event of conflicts regarding incinerator projects in the future. The results herein may also be of merit in determining priorities when establishing harm reduction measures for carcinogens at incinerators. However, the study does contain several limitations. The SCREEN-3 model, a kind of screening model that provides conservative results, can provide higher forecasted concentrations of air pollutants than other models. Moreover, although the incinerator in question is set to be a thermoselect type, domestic data for emissions from these incinerators is not available, and assumptions were based on a stoker type incinerator. Insufficient domestic data likewise compelled the use of data of USA, resulting in possible errors in results. Continued research will thus be required to develop systematic methodologies that address the foregoing factors and produce more reliable outcomes.

• 경영정보학연구
• /
• 제17권2호
• /
• pp.219-238
• /
• 2015

인터넷과 정보기술의 발달로 사람들은 많은 정보에 접하게 되었으며, 정보 제공 사이트들은 사용자들에게 적합한 정보를 추천해 줌으로써 정보 과잉의 문제를 해결해 왔다. 하지만, 사용자의 취향과 선호에 기반한 정보 추천은 편향된 정보만을 소비하게 되는 정보 편식의 문제점을 일으킬 수 있다. 이러한 추천시스템의 부작용에 대해서는 연구가 거의 행해지지 않아 왔다. 본 논문은 정보 편식을 완화시키는 정보 시스템적 솔루션에 초점을 맞췄다. 적응수준이론과 기대이론을 기반으로 사용자 자신의 정보 소비 행태를 준거점으로 구체화시킨 자기 준거 진단 인터페이스와 타인들의 정보 소비 행태를 준거점으로 자신의 정보 소비를 보도록 도와주는 사회적 준거 진단 인터페이스를 제안하였다. 이러한 두 개의 인터페이스가 정보 소비 행태 자각에 어떤 영향을 미치며, 행동의 자각이 정보 편식을 개선하려는 동기와 실제 행동에 영향을 미치는지를 알아보았다. 인터페이스의 효과는 실험을 이용하여 검증하였다. 분석 결과, 자기 준거 진단 인터페이스가 정보 소비 행태 자각과 정보 편식을 개선하는 행동에 긍정적인 영향을 미치는 것으로 나타났지만, 정보 편식을 개선하고자 하는 동기에는 유의한 결과를 보이지 않았다. 본 연구는 사람들이 선호하는 정보를 제공하는 것에만 관심을 기울였던 기존 연구들과는 달리 추천 시스템의 부작용인 정보 편식의 완화에 관심을 가진 연구라는 의의를 가진다.

• 청정기술
• /
• 제24권1호
• /
• pp.9-14
• /
• 2018

본 연구에서는 TiN-Zr 수소분리막의 제조 공정에 대한 환경 영향 특성을 분석하기 위해 물질전과정평가를 수행하였다. Material Life Cycle Assessment (MLCA)의 소프트웨어로는 Gabi를 사용하였다. 이를 통하여 각 공정에서 미치는 영향과 특성화 별 환경영향평가를 수행하였다. 졸겔법에 의해 전구체 TiN을 합성하고 볼밀법을 이용하여 지르코늄을 코팅하였다. 이를 CIP, HPS에 의해 디스크 형으로 제작하였고 주사전자현미경(scanning electron microscopy, SEM), 에너지분산형 분광분석법(energy dispersive X-ray spectroscopy, EDS), X-선 회절분석기(X-ray diffraction, XRD), 열중량분석(thermo gravimetry/differential thermal analysis, TG/DTA), 비표면적분석(Brunauer, Emmett, Teller, BET) 및 가스 크로마토그래프 시스템(gas chromatograph system, GP)을 이용하여 분리막의 야금학적, 물리학적, 열역학적 특성을 분석하였다. 또한, 물질전과정평가를 위해 수행한 특성화와 정규화 결과, 영향범주 별 환경영향은 해양 생태 독성이 94%, 수계 생태 독성 2%, 인간독성 2%의 기여도를 보였다. 아울러, 제조공정 중 전기 사용이 생태계 영향에 큰 영향을 미친다는 것을 알 수 있었다. 물질 전 과정 평가는 Eco-Indicator '99 (EI99)와 CML 2001 방법론을 기반으로 분석하였다.

• 대한기계학회논문집B
• /
• 제39권7호
• /
• pp.567-578
• /
• 2015

Leidenfrost 온도 이상으로 가열된 벽면과 충돌하는 액적의 속도가 열전달 특성에 미치는 영향에 관한 실험 연구를 수행하였다. 동기화된 초고속 가시화 카메라와 적외선 카메라를 이용하여 벽면과 충돌하는 액적의 충돌 특성과 충돌면의 온도 분포를 측정하였다. 획득한 표면온도 분포를 충돌면의 경계 조건으로 이용하여 가열 벽면의 3차원 비정상 열전도 수치해석을 통해 표면 열유속 분포를 얻었다. 수직방향 충돌속도가 증가할수록 최대 액막 직경이 증가하고 가열 벽면과 액막 사이에 존재하는 증기막의 두께가 감소하여 열전달 효율이 증가하였다. 액적은 웨버수가 30보다 작은 경우 되튐현상이 발생하였으며, 큰 경우 작은 액적들로 분쇄되어졌다. 충돌속도에 의한 열전달량의 증가 경향이 되튐영역에서 분쇄영역에서 가면서 약화되었으며, 이는 분쇄현상에 의해 유효 열전달 면적의 확대 효과가 저감되었기 때문으로 해석된다.

• 한국건설관리학회논문집
• /
• 제24권2호
• /
• pp.59-69
• /
• 2023

FIDIC White Book은 클라이언트와 컨설턴트간 모델 서비스 계약조건이다. 본 연구는 델파이 기법을 활용하여 FIDIC White Book 일반조건의 63개 세부조항들 중 핵심 리스크 세부조항 도출을 목표로 하였다. 해외건설 서비스계약 및 FIDIC White Book에 대한 10년 이상의 경험과 전문지식을 보유한 40명의 전문가 패널을 구성하여 총 3회의 델파이 조사 과정을 통해 전문가의 의견 일치성을 높이는 방향으로 신뢰성을 향상시켰다. 델파이 1차 조사에서는 일반조건 63개 세부조항들 중 리스크의 영향력을 리커트 5점 척도로 폐쇄형 설문조사를 수행하였고 26개의 주요 리스크 세부조항들을 도출하였다. 델파이 1차 조사결과의 내용 타당성은 내용타당도 CVR값으로 검증하였다. 델파이 2차 및 3차 조사에서는 26개의 주요 리스크 세부조항들에 대하여 리커트 10점 척도로 폐쇄형 설문조사를 수행하고 각각의 리스크 발생도 및 영향도를 평가하였다. 델파이 3차 조사 결과의 신뢰성은 변이계수 COV값으로 검증하였다. 26개의 주요 리스크 세부조항들 각각의 리스크 발생도와 영향도 평균값을 PI Risk Matrix에 적용하여 총 14개의 핵심 리스크 세부조항들을 도출하였다. 핵심 리스크 세부조항 도출결과는 구체적인 서비스 범위의 합의, 지연관리, 변경관리가 가장 중요한 것으로 나타났다. 본 연구 결과로 실무관점에서는 컨설팅업체의 컨설턴트가 클라이언트와 서비스 계약을 체결할 때 계약적 리스크 최소화를 위해 검토해야 하는 가이드라인을 제공해 주고 있다. 학문적 관점에서는 해외건설에 참여하는 컨설턴트들을 위한 서비스 계약 관련 핵심리스크 도출에 대한 연구의 방향성을 제시하고 있다.

• 한국물환경학회지
• /
• 제33권5호
• /
• pp.563-571
• /
• 2017

Because of the rapid progress of urbanization in recent decades, the proportion of impervious areas in cities has increased. As a result, hydrological properties of urban streams have changed and non-point pollution sources have increased, that have had considerable influence on human life and ecosystems. To manage these situations, application of non-point pollution reduction facilities and LID facilities are expanding recently. In this study, it is investigated if rainfall interception rate used in design of non-point pollution reduction facilities can be applied to design of LID facilities. For this purpose, EPA SWMM is constructed for part of Noksan National Industrial Complex area wherein long-term observed storm water data can be obtained and storm water interception rates for various design capacities of a bio-retention LID facility reservoirs are estimated. While sensitivity of storm water interception rate according to design specifications of bio-retention facility is not large, sensitivity of storm water interception rate according to regional rainfall characteristics is relatively large. As a result of comparing present rainfall interception rate estimation method with the one proposed in this study, the present method is highly likely to overestimate performance of the bio-retention facility. Finally, a new storm water interception rate formula for bio-retention LID facility is proposed.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권7호
• /
• pp.425-438
• /
• 2020

The study investigates the factors influencing the innovation activities in the enterprises in the Binh Dinh Province, Vietnam. By employing the dataset from a survey in 200 typical enterprises in Binh Dinh and using the Exploratory Factor Analysis and regression analysis, we found that there are eight factor groups affecting the innovation activities of enterprises. They include management of innovation promotion; market research capacity; leadership inspiring innovation; culture of innovation; human resources for implementing innovation; network connection; disseminating/sharing knowledge; and impact of producing/serving technology. All these factors strongly affect the innovation activities, which plays an important role in promoting the sustainable development of the Vietnamese enterprises, with the statistical significance level at 1%. Moreover, findings also show that, among these factors, the market research capacity is the strongest determinant of the innovation activity in the enterprise. An increase of 1 point of capacity of market research will increase the innovation activities in the enterprise by 0.114 point. It is followed by the management of promoting innovation, leadership inspiring innovation, and disseminating and sharing knowledge, with 0.104, 0.103 and 0.102 score, respectively. On the other hand, network connection is the weakest factor, with the score of 0.07 point.

• 한국물환경학회지
• /
• 제20권5호
• /
• pp.397-408
• /
• 2004

Due to the growing impact of non-point source pollution and limitation of water treatment technology, a new policy of water quality management, called a source protection, is now becoming more important in drinking water supply. The source protection means that the public agency purchases the pollution sensitive area, such as riparian zone, and prohibit locations of point and non-point sources. Many studies have reported that this new policy is more economical in drinking water supply than the conventional one. However, it is very difficult to determine location and size of the pollution sensitive zone in the watershed. In this paper, we presented the scientific criteria for the priority of the pollution sensitive zone, along with a case study of the upstream watershed of the Paldang Reservoir, Han River. This study includes applications of the analytical hierarchy process(AHP) and a watershed-based land prioritization(WLP) model. After major criteria affecting water quality were selected, the AHP and geographic analysis were performed. The WLP model allowed us to include both quantity and quality criteria, using AHP as the multi-criteria method in making decision and reflecting local characteristics and various needs. By adding a travel-time function, which represents the prototype effectively, the results secured adaptability and scientific objectivity as well. As such, the WLP model appeared to provide reasonable criteria in determining the prioritization of land acquisition. If the tested data are used with a validated travel-time and AHP method is applied after further discussion among experts in such field, highly reliable results can be obtained.