• Korean Journal of Radiology
• /
• v.24 no.10
• /
• pp.1006-1016
• /
• 2023

Objective: Computed tomography (CT) is an established method for the diagnosis, staging, and treatment of multiple myeloma. Here, we investigated the potential of photon-counting detector computed tomography (PCD-CT) in terms of image quality, diagnostic confidence, and radiation dose compared with energy-integrating detector CT (EID-CT). Materials and Methods: In this prospective study, patients with known multiple myeloma underwent clinically indicated whole-body PCD-CT. The image quality of PCD-CT was assessed qualitatively by three independent radiologists for overall image quality, edge sharpness, image noise, lesion conspicuity, and diagnostic confidence using a 5-point Likert scale (5 = excellent), and quantitatively for signal homogeneity using the coefficient of variation (CV) of Hounsfield Units (HU) values and modulation transfer function (MTF) via the full width at half maximum (FWHM) in the frequency space. The results were compared with those of the current clinical standard EID-CT protocols as controls. Additionally, the radiation dose (CTDIvol) was determined. Results: We enrolled 35 patients with multiple myeloma (mean age 69.8 ± 9.1 years; 18 [51%] males). Qualitative image analysis revealed superior scores (median [interquartile range]) for PCD-CT regarding overall image quality (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]), edge sharpness (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]), image noise (4.0 [4.0-4.0] vs. 3.0 [3.0-4.0]), lesion conspicuity (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]), and diagnostic confidence (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]) compared with EID-CT (P ≤ 0.004). In quantitative image analyses, PCD-CT compared with EID-CT revealed a substantially lower FWHM (2.89 vs. 25.68 cy/pixel) and a significantly more homogeneous signal (mean CV ± standard deviation [SD], 0.99 ± 0.65 vs. 1.66 ± 0.5; P < 0.001) at a significantly lower radiation dose (mean CTDIvol ± SD, 3.33 ± 0.82 vs. 7.19 ± 3.57 mGy; P < 0.001). Conclusion: Whole-body PCD-CT provides significantly higher subjective and objective image quality at significantly reduced radiation doses than the current clinical standard EID-CT protocols, along with readily available multi-spectral data, facilitating the potential for further advanced post-processing.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.2
• /
• pp.109-116
• /
• 2010

Objectives: The pandemic of novel influenza A (H1N1) virus has required decision-makers to act in the face of the substantial uncertainties. In this study, we evaluated the potential impact of the pandemic response strategies in the Republic of Korea using a mathematical model. Methods: We developed a deterministic model of a pandemic (H1N1) 2009 in a structured population using the demographic data from the Korean population and the epidemiological feature of the pandemic (H1N1) 2009. To estimate the parameter values for the deterministic model, we used the available data from the previous studies on pandemic influenza. The pandemic response strategies of the Republic of Korea for novel influenza A (H1N1) virus such as school closure, mass vaccination (70% of population in 30 days), and a policy for anti-viral drug (treatment or prophylaxis) were applied to the deterministic model. Results: The effect of two-week school closure on the attack rate was low regardless of the timing of the intervention. The earlier vaccination showed the effect of greater delays in reaching the peak of outbreaks. When it was no vaccination, vaccination at initiation of outbreak, vaccination 90 days after the initiation of outbreak and vaccination at the epidemic peak point, the total number of clinical cases for 400 days were 20.8 million, 4.4 million, 4.7 million and 12.6 million, respectively. The pandemic response strategies of the Republic of Korea delayed the peak of outbreaks (about 40 days) and decreased the number of cumulative clinical cases (8 million). Conclusions: Rapid vaccination was the most important factor to control the spread of pandemic influenza, and the response strategies of the Republic of Korea were shown to delay the spread of pandemic influenza in this deterministic model.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.7
• /
• pp.2889-2894
• /
• 2015

Background: To investigate the impact of the breast size, shape, maximum heart depth (MDH), and chest wall hypotenuse (the distance connecting middle point of the sternum and the length of lung draw on the selected transverse CT slice) on the volumetric dose to heart with whole breast irradiation (WBI) of left-sided breast cancer patients. Materials and Methods: Fifty-three patients with left-sided breast cancer undergoing adjuvant intensity-modulated radiotherapy (IMRT) were enrolled in the study. The primary breast size and shape, MHD and DCWH (chest wall hypotenuse) were contoured on radiotherapy (RT) planning CT slices. The dose data of hearts were obtained from the dose-volume histograms (DVHs). Data were analyzed by one-way analysis of variance (ANOVA), Student's t-test and linear regression analysis. Results: Breast size was independent of heart dose, whereas breast shape, MHD and DCWH were correlated with heart dose. The shapes of breasts were divided into four types, as the flap type, hemisphere type, cone type and pendulous type with heart mean dose being $491.8{\pm}234.6cGy$, $752.7{\pm}219.0cGy$, $620.2{\pm}275.7cGy$, and $666.1{\pm}238.0cGy$, respectively. The flap type of breasts shows a strong statistically reduction in heart dose, compared to others (p=0.008 for V30 of heart). DCWH and MHD were found to be the most important parameters correlating with heart dose in WBI. Conclusions: More attention should be paid to the heart dose of non-flap type patients. The MHD was found to be the most important parameter to correlate with heart dose in tangential WBI, closely followed by the DCWH, which could help radiation oncologists and physicsts evaluate heart dose and design RT plan in advance.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.288-293
• /
• 2016

Purpose: The purpose of this study was to investigate the key factors in designing a three-wheeled two-row soybean reaper (riding type) that is suitable for soybean production, and ensure worker safety by proposing optimal work conditions for the prototype of the designed machine in relation to the slope of the road. Methods: A three-wheeled two-row soybean reaper (riding type) was designed and its prototype was fabricated based on the local soybean-production approach. This approach was considered to be closely related to the prototype-designing of the cutter and the wheel driving system of the reaper. Load distribution on the wheels of the prototype, its minimum turning radius, static lateral overturning angle, tilt angle during driving, and The working and rear overturning (back flip) angle were measured. Based on the gathered information, investigations were conducted regarding optimal work conditions for the prototype. The investigations took into account driving stability and worker safety. Results: The minimum ground clearance of the prototype was 0.5 m. The blade height of the prototype was adjusted such that the cutter was operated in line with the height of the ridges. The load distribution on the prototype's wheels was found to be 1 (front wheel: F): 1.35 (rear-left wheel: RL): 1.43 (rear-right wheel: RR). With the ratio of load distribution between the RL and RR wheels being 1: 1.05, the left-to-right lateral loads were found to be well-balanced. The minimum turning radius of the prototype was 2.0 m. Such a small turning radius was considered to be beneficial for cutting work on small-scale fields. The sliding of the prototype started at $25^{\circ}$, and its lateral overturning started at $39.3^{\circ}$. Further, the critical slope angle for the worker to drive the prototype in the direction of the contour line on an incline was found to be $12.8^{\circ}$, and the safe angle of slope for the cutting was measured to be less than $6^{\circ}$. The critical angle of slope that allowed for work was found to be $10^{\circ}$, at which point the prototype would overturn backward when given impact forces of 1,060 N on its front wheel. Conclusions: It was determined that farmers using the prototype would be able to work safely in most soybean production areas, provided that they complied with safe working conditions during driving and cutting.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.121-142
• /
• 1995

The Expressionism took shape in the early twentieth century, so called as the time of change and innovation which intermediated between the time of extreme prosperity and peace and the time of disruption. This study is based on the wide sense of Expressionism out of various concepts of Expressionism. The afore-mentioned phenomenon was emphasized all the more in the French Expressionism and it is the most important and substantial object in the Art to make a direct transference of emotion , feeling and thought and it could be regarded as one of characteristics of the French Expressionism . In Addition, the Expressionism produced " Aesthetics on Ugliness "Aesthetics des H lichen )" in creating work of art. It was an expression of the Existentialism based on Humanism for modern people who lived at time of nihility and such artistic movement accepted polarity and ambivalance concepts claimed by Nietzsche into three specific fields in accordance with thought and technique in the work of art and those are the Intuitional Expressionism. Cubistic Expressionism and Fantastic Expressionism. This study makes a close analysis of costume style trends on the basis of the categorized Expressionism enumerated as above. The characteristics of Intuitional Expressionism is that poverty and a sense of alienation dominated all society and thus the social reality brought a trend of social participation . This social reality effected significantly modern costume style and a reformative costume turned up at last . This reformative costume was classified into Gar onne look, Military look and Lingerie look by characteristics of style in order to make a close examination for the relationship between social reality and the reformative structure. Cubistic Expressionism effected costume forming and changed costume style through " Deformation " and " Distortion" in forming technique , and also it has developed geometrical style of costume, which could be symbolized by mechanism. And on the other hand, this Cubistic Expressionism has emphasized exaggerated expression ability to produce rigid and stiff style of costume. Fantastic Expression pursued basic artistic worth from the primitive and ethnic customs and accepted fantastic oriental Exoticism . This Fantastic Expressionism effected costume style of twentieh century and such designers as Lon Bakst, Paul Poiret, Elsa Schiapareli adopted intentive primary color. It also applied " Depaysment" to modern costume style , which introduced avant-garde design to give an impact through destruction of the existing traditional concept. This study also analized seven major representative costume designers of the early twentieth century. They are L on Bakst, Paul Poiret, Madeline Vionnet, JeanPatou, Gabriel Chanel and Elsa Schiaparelli. These designers deployed creative costume design work with peculiar expression technique based on the French expressionism. The costume study related to art history was so far made mostly to approach costume forming but only a few study is found to have approached idealistic background of art history in connection with creating costume. From that point of view, it is profoundly significant for this study to analize idealistic background and characteristics of Expressionism and relationship between costume and expressionism and to examine modern costume of twntieth century in conjunction with technical characteristics and spiritual sense of Expresionism.eristics and spiritual sense of Expresionism.

• Korean Institute of Interior Design Journal
• /
• v.23 no.1
• /
• pp.61-68
• /
• 2014

Recently, there have been increasing attempts to pursue and express feelings such as sensibilities, emotions, and impressiveness in commercial spaces. One of such methods is to apply 'storytelling' to space designs. Applicability of storytelling to a space suggests that the contents of a space can be expressed through various mediums. Portraying events and situations through a single time continuity of a story is referred to as 'narrative'. The movement of users and sequence of contents are determined by a narrative. It provides different storytelling and a sense of place to each space through various roles, such as wide association, engraving, and image formation. A narrative can lead users to engage in different perceptions and behaviors even in spaces with the same content. Thus, this study is intended to examine the impact of space marketing in line with design narratives, assuming that narratives of commercial space designs will influence the formation of brand identity. The research methods are as follows. First, the definition of narratives in space design was established by examining narrative architectures. Second, design analysis tools for commercial spaces were established from the perspective of narratives through preceding studies. Third, the design narratives of different shops under the same brand were comparatively analyzed through a case study. To carry out a case study, a commercial space of 'O'sulloc' was selected, and its brand identity was studied from the narrative standpoint. The case study involved interior designs of 7 road shops of 'O'sulloc.' Among the 7 road shops, two of them with the biggest difference in design narratives were selected, and an observation survey was done on the users as a second analysis. Through the observation survey, actual design narrative experience was analyzed in 4 steps of introduction, development, turn, and conclusion. The findings are as follows. The design method of each shop varied, and different design elements were emphasized. Among various elements, the ones that reflect the brand identity of 'O'sulloc' the best were logo, product, and shape. During the process of narratives, the characteristics of each shop and user recognition and behavior varied depending on the degree of emphasis on a particular element. It suggests that space design narratives can influence the formation of brand identity. This study provides ideal directions of developing space designs necessary for forming brand identity from the standpoint of Korean traditional culture modernization. Future studies could discuss the economic feasibility of such designs.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.283-287
• /
• 2005

The slow evolution of global magnetic fields and other dynamical processes in atmospheres of CP magnetic stars lead to the development of induced electric currents in all conductive atmospheric layers. The Lorentz force, which results from the interaction between a magnetic field and the induced currents, may modify the atmospheric structure and provide insight into the formation and evolution of stellar magnetic fields. This modification of the pressure-temperature structure influences the formation of absorption spectral features producing characteristic rotational variability of some spectral lines, especially the Balmer lines (Valyavin et al., 2004 and references therein). In order to study these theoretical predictions we began systematic spectroscopic survey of Balmer line variability in spectra of brightest CP magnetic stars. Here we present the first results of the program. A0p star $\Theta$ Aur revealed significant variability of the Balmer profiles during the star's rotation. Character of this variablity corresponds to that classified by Kroll (1989) as a result of an impact of significant Lorentz force. From the obtained data we estimate that amplitudes of the variation at H$\alpha$, H$\beta$, H$\gamma$ and H$\delta$ profiles reach up to $2.4\%$during full rotation cycle of the star. Using computation of our model atmospheres (Valyavin et al., 2004) we interpret these data within the framework of the simplest model of the evolution of global magnetic fields in chemically peculiar stars. Assuming that the field is represented by a dipole, we estimate the characteristic e.m.f. induced by the field decay electric current (and the Lorentz force as the result) on the order of $E {\~} 10^{-11}$ cgs units, which may indicate very fast (< < $10^{10}$ years) evolution rate of the field. This result strongly contradicts the theoretical point of view that global stellar magnetic fields of CP stars are fossil and their the characteristic decay time of about $10^{10}$ yr. Alternatively, we briefly discuss concurring effects (like the ambipolar diffusion) which may also lead to significant atmospheric currents producing the observable Lorentz force.

• Journal of Environmental Health Sciences
• /
• v.48 no.1
• /
• pp.1-8
• /
• 2022

Objectives: The purpose of this study is to reveal the circumstances under which the cases of harm to health caused by humidifier disinfectant were neglected and show the points where the number of victims and the degree of damage could have been reduced. In addition, it attempts to describe how damage management proceeded immediately after the incident and actually exacerbated the damage. Finally, it explores the unfortunate aspects of the recent trial. By doing so, it attempts to take this as an opportunity to consider whether a tragic event such as the humidifier disinfectant incident could occur in the future. Methods: This study collected and analyzed data on chemical material characteristics related to humidifier disinfectants, data on health effect characteristics, data on related laws and regulations from the Ministry of Environment, data related to the damage investigation by the Korea Environmental Industry and Technology Institute, and current contents. Results: The lack of related systems and laws is the area where the greatest responsibility for the cause of the humidifier disinfectant disaster falls, so it is difficult for the government to escape this responsibility. Establishing a dedicated department to identify the prevalence of certain diseases within the functions of the Health Insurance Review and Assessment Service to monitor health can greatly contribute to the prevention and management of diseases through early detection and management of group outbreaks caused by harmful factors. Humidifier disinfectant damage relief should have been expanded earlier beyond HDLI (humidifier disinfectant lung injury) to include non-specific diseases such as asthma, pneumonia, and interstitial pneumonia. The scope of relief benefits should have also been expanded earlier to include the payment of disability benefits. Fortunately, with the 2020 revision of the Special Act, the conditions for estimating causal relations were eased and individual screening systems such as health impact assessment were reorganized along with the introduction of a rapid screening system. Conclusions: The management system for chemical substances in a country is clearly of paramount importance, and the ministry in charge must have a response system in case of damage to health effects. Administration that looks at the victims' situation from their point of view is needed, and technical countermeasures are required to quickly recognize the prevalence of certain diseases.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.5
• /
• pp.227-237
• /
• 2023

PURPOSE. This study aimed to assess and compare the color stability, flexural strength (FS), and surface roughness of occlusal splints fabricated from heat-cured acrylic resin, milled polymethyl methacrylate (PMMA)-based resin, and 3D-printed (PMMA) based-resin. MATERIALS AND METHODS. Samples of each type of resin were obtained, and baseline measurements of color and surface roughness were recorded. The specimens were divided into three groups (n = 10) and subjected to distinct aging protocols: thermomechanical cycling (TMC), simulated brushing (SB), and control (without aging). Final assessments of color and surface roughness and three-point bending test (ODM100; Odeme) were conducted, and data were statistically analyzed (2-way ANOVA, Tukey, P <.05). RESULTS. Across all resin types, the most significant increase in surface roughness (Ra) was observed after TMC (P < .05), with the 3D-printed resin exhibiting the lowest Ra (P < .05). After brushing, milled resin displayed the highest Ra (P < .05) and greater color alteration (∆E₀₀) compared to 3D-printed resin. The most substantial ∆E₀₀ was recorded after brushing for all resins, except for heat-cured resin subjected to TMC. Regardless of aging, milled resin exhibited the highest FS (P < .05), except when compared to 3D-printed resin subjected to TMC. Heat-cured resin exposed to TMC demonstrated the lowest FS, different (P < .05) from the control. Under control conditions, milled resin exhibited the highest FS, different (P < .05) from the brushed group. 3D-printed resin subjected to TMC displayed the highest FS (P < .05). CONCLUSION. Among the tested resins, 3D-printed resin demonstrated superior longevity, characterized by minimal surface roughness and color alterations. Aging had a negligible impact on its mechanical properties.

• The Journal of Fisheries Business Administration
• /
• v.14 no.2
• /
• pp.15-68
• /
• 1983

From the economic point of view the fishing port is the complex of installations on land, organized to serve the fishing fleet and its cargo, and is the main link in the production chain of all components of the fishing industry, with the aim of achieving the planned targets with the minimum cost. Fishing port investment decisions have had significant impact on the development aims of Korean fisheries. Fishing port investments in Korea are made mostly by public or semipublic port authorities. Such investments should be judged not purely on the basis of financial profitability but rather on the extent to which they serve the development aims of the fishing industry. This makes the economic appraisal process more complex and presents certain problems in correctly quantifying the economic costs and benefits of the fishing port projects. This study concentrates more on the theoretical economic appraisal models than on the purely financial aspects of fishing port investments and points out the difference between the two approaches. In the result, there is clearly an element of judgment as to whether or not a shadow price needs to be used in estimating economic benefits and costs. From this viewpoint, some attempts are made to provide definitions of the possible economic benefits and costs, and methods for estimating and evaluating them in Part III and IV. Especially queueing theory is applied in the calculation of economic benefits. When a project is contemplated and analysis shows it to Lave a positive NPV, one question that arises is whether it should be implemented now or delayed. In this paper, the first year rate of return method is regarded as a more concise way of solving the timing of investment, At the end of Part IV, risk analysis of fishing port investments is considered. It can be handled in a number of ways, ranging from informal judgment to complex statistical analyses involving large-scale computer models, This paper recommends that evaluators of fishing port investments use the sensitivity analysis indicating exactly how much NPV will change in response to a given change in an input variable, other things held constant. Decisions regarding the amount of capacity to provide must be made in fishing port investments. Providing too much service would involve excessive capital costs. On the other hand, not providing enough service capacity would cause the waiting line of fishing vessels to become excessively long at times. Therefore, in Part V, the optimal number of berths and berth productivity in fishing port are defined as follows: Minimize E(TC) ＝ E(WC)＋E(SC) The minimum of this function is the solution and that is the optimal number of berth and berth productivity in fishing port.