• Journal of Wetlands Research
• /
• v.15 no.4
• /
• pp.567-572
• /
• 2013

Mammals act as an important role in maintaining ecosystem, but direct observation is very difficult. Nevertheless, in order to understand the impact of various changes about a sudden environment, long-term monitoring through direct investigation is essential. This study investigated home range analysis using GPS tracking device and behavioral ecology of Korean waterdeer (Hydropotes inermis), indigenous and native species in Korea. Studies on ecological characteristics and home range of Korean waterdeer are insufficient. Therefore, we studied home range using the GPS technique for critical point of existing research. Data showed the active movement in daytime ($44.1km^2$) than night ($30.0km^2$) and large area of activity in winter ($3.7km^2$) and spring ($44.1km^2$) than summer($0.04km^2$) and autumn ($0.01km^2$). The most used area of Korean waterdeer was forested area and wetland, agricultural area, waters in order of frequency based on the land coverage map. Our research represents overall characteristics of Korean water deer due to measurement of area of activity. However, this research signified behavioral ecology for Korean waterdeer, and further investigation in necessary.

• Geomechanics and Engineering
• /
• v.15 no.2
• /
• pp.721-728
• /
• 2018

The surrounding rock mass contains cracks and joints which are distributed randomly around tunnels, and in the process of tunnel blasting excavation, radial cracks could also be induced in the surrounding rock mass. In order to clearly understand the impact of radial cracks on tunnel stability, tunnel model tests and finite element numerical analysis were implemented in this paper. Two kinds of materials: cement mortar and sandstone, were used to make tunnel models, which were loaded vertically and confined horizontally. The tunnel failure pattern was simulated by using RFPA2D code, and the Tresca stresses and the stress intensity factors were calculated by using ABAQUS code, which were applied to the analysis of tunnel model test results. The numerical results generally agree with the model test results, and the mode II stress intensity factors calculated by ABAQUS code can well explain the model test results. It can be seen that for tunnels with a radial crack emanating from three points on tunnel edge, i.e., the middle point between tunnel spandrel and its top with a dip angle $45^{\circ}$, the tunnel foot with a dip angle $127^{\circ}$, and the tunnel spandrel with $135^{\circ}$ with tunnel wall, the tunnel model strength is about a half of the regular tunnel model strength, and the corresponding tunnel stability decreases largely.

• Journal of the Korean earth science society
• /
• v.24 no.5
• /
• pp.411-419
• /
• 2003

The assessment of environmental impact on NO$_2$ (or TSP) emitted by vehicles is important for local residents from the point of view of their health and environmental protection. In the course of field investigations, correct concentrations are measured and meteorological data are observed for numerical simulation. To determine background concentration for numerical simulation, annual average concentrations of NO$_2$ (or TSP) are estimated using the Puff-Plume model. If the estimated result affects the environment, it must be considered in the environmental conservation activity. To make the process of a estimation of environmental assessment more easily, this system is developed. Moreover, this system was supplied a Graphic User Interface (GH) for the user who calculated the concentration of air pollution exhausted from the traffic on general roads except special roads such as interchanges and entrances to tunnels. This system can offer not only the numerical result but also a graphic display. Even a beginner who is not a professional programmer can calculate the result easily.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.11-18
• /
• 2016

Product liability (PL), which began enforcement in 2002, refers to the legal responsibility of the manufacturers or sellers (wholesales or retailers) for the property damage or bodily harm caused by their product. With a strong enforcement of the Product Liability (PL) Act, companies are required to structure and operate a response system to defend or prevent product accidents efficiently, but small and medium enterprises (SMEs) are unable to respond more aggressively due to limitation of management resources. In this manner, it is important to develop response strategies for SMEs to efficiently cope with the PL Act. In this paper, the PEST (Political, Economic, Social, and Technological) analysis is performed to reveal the impact of the PL Act on SMEs in macro-economic point of view. To formulate SME's PL response strategy, SWOT analysis is performed to categorize each factors from PEST analysis and AHP is applied to identify the intensities of SWOT factors. The prioritized SWOT factor, results of PEST-SWOT-AHP analysis, are used to formulate SME's PL response strategies. The study results are briefly summarized as follows. To reduce product defects, it is necessary for SMEs to formulate PL response strategies for each phase of the product life cycle by continuously collecting and analyzing PL cases in the same industry or for similar products. In addition, SMEs should invest more technological effort to ensure product safety. Further, SMEs should spread PL awareness to all staff members by training internal PL experts. Moreover, a SME should enroll in PL insurance and spread this information to its customers so that they become aware that the company is proactively conforming to the PL law.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.4
• /
• pp.123-132
• /
• 2018

The purpose of this study was to evaluate the reduction effect of non point source (NPS) pollution in Haean highland agricultural catchment ($62.8km^2$) for 13 BMP scenarios under RCP (Representative Concentration Pathway) 4.5 and 8.5 scenarios. Under the present climate condition, the BMP (best management practices) reduction efficiency of SS (suspended solid), T-N (total nitrogen), and T-P (total phosphorus) showed +25.7%, +4.2%, and +16.1% for VFS (vegetative filter strip), +0.1%, +15.6%, and +5.7% for FC (fertilizer control), and +6.3%, -2.9%, and +3.9% for RSM (rice straw mulching) respectively. In general, effective was the best for SS and T-P reductions, and the FC was the best for T-N reduction. The negative effect of T-N on RSM was induced by increase in infiltration and solute transport to baseflow. Under the future climate change scenarios, the SS, T-N, and T-P reduction efficiency showed the range of +1.9~+11.6%, -1.9~+0.2%, and +5.3~+11.9% respectively. The 3 BMPs (VFS, FC, and RSM) application in the future showed negative and little differences (-0.5~+1.6%) for SS and T-N reduction efficiencies while T-P reduction efficiency showed +0.3~+7.6% comparing with the baseline period. To achieve an increase in the reduction efficiency of future SS and T-N by +2~+10%, the combined application of more than two BMPs is necessary.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.46-51
• /
• 2016

The TMCP steel has expanded in the marine structure during manufacturing process because of its excellent weld-ability and impact toughness. In the case of merchant ships, coverage of TMCP steel has been used widely on over DH36 Classifications material. The line heating process is applied to the outer surface of the steel plate for the shipbuilding. In this study, We compared between TMCP and normalizing steel for shipbuilding by analyzing some basic data through performing the natural cooling after the line heating. The experimental results show the angular misalignment changes in line heating. Heated surface of normalizing steel material expanded to $-0.3^{\circ}$ and reduced to $+0.2^{\circ}$ after cooling. And during cooling at $194^{\circ}C$ for 1,500 seconds, Angular Misalignment began from - direction to + direction, passed the critical point to the default at 2,200 seconds and did not take place any more at $103^{\circ}C$ after the 2,700 seconds. Angular Misalignment results of TMCP steels and Normalizing steel material show same angular misalignment lasted 1,200 seconds, TMCP steel has given more expansion and contraction angle which is $0.2^{\circ}$ than that of the Normalizing steel. Length difference between expansion and contraction is about 0.3 mm.

• Journal of Adhesion and Interface
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2017

This study is about basic sensor experiment using PDPS by common pencil. 20 mm length, 3 mm thickness of line using 4B pencil is optimum condition. In order to be stable at point of contact between pencil line and copper wire, silver paste is needed. At using the PDPS, thermal detecting is able and thermal properties is inversely proportional to electrical resistance in the based on empirical formula. The sensor can be also used in the composites mold via the empirical formula by the relationship between thermal impact and electrical resistance. The change of electrical resistance relates the interfacial property of composites. It leads to expectation of properties.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.487-497
• /
• 2022

The purpose of this study is to explore the impact of cultural capital on individuals and society, and to demonstrate the causal relationship between cultural capital and viewing loyalty. Existing studies conducted from a cultural sociological point of view have mainly linked cultural capital to social inequality issues, so the role of cultural capital in personal life and social life has not received attention. To fill this literary gap, this study explored the role of cultural capital centering on the art field. A structural equation model was used to test the research hypotheses, and data were collected for college (graduate) students from three universities in Seoul. As a result of the study, it was found that artistic cultural capital had a significant effect on self-image in the field of personal life. In addition, it was found that artistic cultural capital had a positive effect on tolerant attitudes in the field of social life. Finally, it was found that viewing loyalty, which refers to favorable attitudes and behaviors toward visiting art museums, was significantly affected by artistic cultural capital. The results of this study have academic and practical implications in terms of exploring the practical role of cultural capital.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.150-159
• /
• 2022

In this paper, we propose a physics simulation for augmented reality (AR) billiards content. The characteristics of the physics simulation for the proposed AR billiards content are as follows. First, physical equations are derived by calculating the force and moment of inertia applied to the billiards ball to realize the motion of the billiards ball similar to the real one in the AR environment. Then, we determine the velocity and angular velocity of the virtual billiards ball associated with the rotation of the virtual billiards ball with respect to the impact point. Second, using some vectors such as incidnet vector, normal vector, reflection vector, the trajectory of the virtual billiards ball would be implement. these equations are applied to AR environment so that AR billiards content could be implement. This physics simulation allows users to feel like the real world using a virtual pool table and induce them to interact with the real environment. As a result of the experiment, the accuracy range between the path of the real billiards ball and the path of the virtual billiards ball was calculated to be 97.75% to 99.11%. Therefore, it was determined that the performance of the physics simulation for the AR billiards content proposed in this paper performs similarly to the path of the real billiards ball.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.27 no.1
• /
• pp.1-16
• /
• 2024

The riparian area plays a crucial role in maintaining the balance between the aquatic and terrestrial ecosystems. The Korean government has recognized the importance of protecting riparian areas and has taken steps to purchase land and create ecobelt to reduce non-point source pollutants(NSPs) that can negatively impact water quality. However, selecting the catchment area and calculating the pollution load can be challenging due to the small area of the purchased land and the limitations of low-resolution DEMs. To address these challenges, this study proposes the use of unmanned aerial vehicles(UAVs) to create a high-resolution DEM and calculate the pollution load through land cover analysis. This approach can provide a more accurate representation of the land use status and help to identify areas that are contributing to NSPs. The quantitative comparison of the difference in water quality improvement ecosystem services according to the scenarios of additional catchment areas shows that even land purchased for the same amount of money may have different ecosystem service values, and this was quantitatively calculated. This can be used to prioritize future land acquisition. Overall, this study's approach could provide valuable insights into the effectiveness of ecobelt in reducing NSPs and inform future efforts to protect riparian areas in Korea and beyond.