• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.1
• /
• pp.87-92
• /
• 2002

We present a simple experimental method for determination of limiting intrinsic fixed-pattern non-uniformity (NU) due to fabrication process in two-dimensional CCD multiplexers (MUXs) that are used for hybrid focal plane arrays. Here, this is done by determining separately the two NUs viz. that are $V_T$ dependent and $V_T$ independent. From these measurements, process dependent NU can be extracted. It is argued that $V_T$ dependent NU can be eliminated by designing novel input circuits whereas $V_T$ independent NU, primarily, dependent on process control and material variations may be reduced but cannot be eliminated completely and hence limits the FPA performance eventually.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.423-424
• /
• 2006

This paper describes a 3D face recognition using different devices for 3D faces and input faces which include several different pose. Before the recognition stage, through the EC-SVD, all data have to be preprocessed and normalized. At recognition stage, we propose the multi-point signature method for measuring facial surface information. And we use the root mean square error for matching. From the experiment results, we have 92.5% recognition rate.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.3
• /
• pp.347-352
• /
• 2004

We generated blocks from the direction-extracted fingerprint during the pre-process of the fingerprint recognition algorithm and performed training by using the direction minutiae of each block as the input pattern of the neural network, so that we extracted the core points to use in the matching. Based on this, we designed the fingerprint recognition embedded system and tested it by using the control board and the serial communication to utilize it for a variety of application systems. As a result, we can verify the reliance satisfactorily.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.50-53
• /
• 2000

It is effectively removed noise in the image using FCNN(Fuzzy Cellular Neural Network) applying fuzzy theory to CNN(Cellular Neural Network) structure and HD(Hausdorff Distance) commonly used measures for object matching. HD calculates the distance between two point set of pixels in two-dimensional binary images without establishing correspondence. Also, this method is proposed in order to improve the operation speed. In this paper, $\alpha$-LTSHD(Least Trimmed Square HD) operator applying $\alpha$-Trimmed to LTSHD, one field of HD, is applied to FCNN structure, and it is proposed as the modified method in order to remove noise in the image. Also, it is made a comparison with the other filters by using MSE and SNR after removing noise using the FCNNS which are applied $\alpha$-LTSHD operator through the computer simulation. In a result, FCNN performance which is applied the proposed $\alpha$-LTSHD demonstrated the superiority to the other filters in the noise removal.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.72-76
• /
• 2003

In this paper, active frequency doubler with broadband characteristics and unconditional stability from 6GHz to 12GHz was designed and fabricated using PHEMT. The designed frequency multiplier has a bias point near pinch-off and a proposed RC circuit between bias line and input matching network for the improvement of stability. With 0dBm input power, second harmonic of 1.7dBm at 12GHz, - 27.5dBc suppression of 6GHz fundamental, -18dBc suppression of 18GHz 3rd harmonic and the output bandwidth of 1.8GHz have been measured.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2222-2224
• /
• 1998

This paper presents a 3D feature extraction method using rough set theory. Using the stereo cameras, we obtain the raw images and then perform several processes including gradient computation and image matching process. Decision rule constructed via rough set theory determines whether a ceratin point in the image is 3D edge or not. We propose a method finding rules for 3D edge extraction using rough set.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05c
• /
• pp.17-20
• /
• 2004

PV model is presented based on the shockley diode equation. The simple model has a photo-current source, an single diode junction and a series resistance and includes temperature dependences. An accurate PV module electrical model is presented, matching with boost converter MPPT strategy and demosntarted in Matlab for a typical general purpose solar cell. Given solar insolation and temperature, the model returns current vector and MPP.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.185-188
• /
• 2015

미리 저장된 객체의 3차원 특징점(Feature point) 좌표와 카메라 영상의 2차원 특징점 좌표를 매칭(Matching)하여 객체를 추적하는 방식의 경우, 카메라의 시점이 변할 때 특징점에서 발생되는 원근 효과(Perspective effect)가 반영되지 못하여 특징점 매칭 오류가 발생한다. 따라서 특징점에서 발생하는 원근 효과를 반영하여 정확한 카메라 포즈를 추정하기 위해 이전 프레임(Frame)의 카메라 포즈(Camera Pose)에 맞추어 텍스쳐가 포함 된 3차원 객체의 모델을 렌더링 하여 원근 효과를 적용한 후, 현재 카메라 영상과 특징점 매칭하여 프레임 사이의 카메라 움직임을 구하여 객체를 추적한다. 더 나아가 본 논문에서는 특징점 매칭에서 발생하는 작은 오류들로 인한 미세한 카메라 움직임은 2단계의 임계치(Threshold)를 적용하여 떨림 현상으로 간주하여 떨림 현상이 제거된 객체 추적을 수행한다. 매 프레임마다 카메라 포즈에 맞춘 추적 객체를 렌더링 하기 때문에 떨림 현상으로 간주되어 제거된 카메라 움직임은 누적되지 않고, 추적 오류도 발생시키지 않는다.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.7-11
• /
• 2001

In this paper, trapezoid sections and prominence sections were examined to improve the performance of floating breakwater in long waves. The linear potential theory is used and the boundary element method with a matching boundary is employed for numerical computation. The effects of the side slope of the trapezoid section and the geometry ratio of the prominence section on the floating breakwater were examined. It was found that trapezoid sections show lower transmission coefficients than the rectangular sections in the long wave range. In prominence sections the size of the sides are more important than the size of the top. Proper choices of the pontoon type geometry may move the local minimum point of the wave transmission coefficient toward the longer wave ranges and improve the performance of the floating breakwater in the long wave range for a given wave period.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.64-72
• /
• 2005

In this paper, we propose a design method of the millimeter-wave(W-Band) waveguide cavity harmonic voltage controlled oscillator(VCO) using a Gunn diode for the armor sensor. Using the 3-dimensional simulation tool(Ansoft $HFSS^{TM}$), we were able to find the impedance matching point between waveguide and Gunn diode and estimate the oscillation frequency. A varactor diode is used for the frequency tuning, and we find out the equation for the calculation of the tunable frequency range. The designed VCO shows good performances; 17dBm output power at 94GHz center frequency, 520MHz frequency tuning range similar to the estimated value(480MHz).