• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.283-283
• /
• 2004

공장자동화는 국제사회 속에서 살아 남기 위한 필수 요건이 되었다. 값싼 인건비를 무기로 제품 경쟁에 뛰어 들고 있는 주변국가와 경쟁하기 위해서는 인건비 절감과 품질 향상이 필수적이다. 본 논문은 POS용 키보드의 생산공정 중에서 조립된 키보드 칼라 라벨을 자동 검사하는 시스템 개발을 최종목표로 하였다. 현재, 산업용으로 폭 넓게 사용되고 있는 머신 비전 측정시스템은 흑백의 영상과 비교적 간단한 물체에 초점을 맞추고 있다. 그러나, Fig.1의 POS용 키보드는 일반 컴퓨터용 키보드와는 달리 각각의 키가 칼라 라벨로 되어있기 때문에 기존의 흑백 머신 비전 시스템으로 자동화를 구축하기는 힘들다.(중략)

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06c
• /
• pp.172-175
• /
• 2011

본 연구에서는 현장검사 (Point-of-Care Testing, POCT)를 목적으로 측방 유동 검사 스트립의 피크들을 분리하는 템플릿 정합법을 제안한다. 템플릿은 스트립의 제어 리건드 선과 대상 리건드 선 간격으로 떨어져 있는 두 개의 펄스로 구성된다. 이 템플릿을 스캔신호와 정합시켜 최대 응답 위치에서 피크들의 중심을 찾고, 주어진 위치에서 피크들을 분리한다. 제안한 방법을 바디텍메드사의 당화 혈색소 면역 검사 스트립과 동사의 형광 스트립 리더기에 적용하여 농도 측정 성능에 미치는 영향을 기존에 구현된 방법과 비교 검토하였다. 실험 결과 본 연구에서 제안한 방법은 장치나 검사 스트립에 종속적인 매개변수가 필요한 기존 방법과 동등한 성능을 보였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.222-224
• /
• 2011

본 논문은 1 비트 변환(1-bit transform: 1BT) 알고리듬에 적응적 탐색 지점 조정을 추가적으로 적용한 알고리듬이다. 1BT는 정합 오차 기준을 Sum of Absolute(SAD)를 대신 하여 Number of Non-matching Point(NNMP)를 사용하여 속도를 향상시키고, 하드웨어 구현을 용이하게 했다. 하지만 정합 오차 기준만 바뀌었을 뿐, 전역 탐색(FS: Full Search)알고리듬을 사용한다. 본 논문에서는 1BT방법에 적응적 탐색 지점 조정을 적용함으로써 추가적으로 속도 향상하는 알고리듬을 제안하였다. 실험 결과에서는 기존의 1BT와 제안하는 알고리듬을 비교하여 PSNR과 시간 측면에서의 뛰어난 성능을 보여준다.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.11-15
• /
• 2002

High speed probe for measurement of sin91e flux quantum circuits is comprised of coaxial cables and microstrip lines in order to carry high speed signals without loss. For the impedance matching between coaxial cable and microstrip line, we have determined the dimension of the microstrip line with 50${\Omega}$ impedance by simulation and then have investigated the effect of line width and cross-sectional shape of signal line, dielectric material, thickness of soldering lead at the coaxial-to-microstrip transition Point, and the an91c between dielectric material and end part of the signal line on the characteristics of signal transmission of the microstrip line. From the simulation, we have found that these all parameter's had influenced on the characteristic of signal transmission on the microstrip line and should be reflected in fabricating high speed probe, We have also determined the dimension of coplanar waveguide to fabricate testing sample for performance test of high speed probe.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.335-338
• /
• 1988

A numerical method is presented for the scattering by the perfectly conducting cylinder with arbitrary cross sections. The relevant integral equation considered by the E-field formulation is solved by method of moments, and thereby the surface current induced as well as the radar cross section of the scatterer are numerically computed to specify the scattering nature of the scatterer. Two separate methods, one with point matching and the other Galerkin's method, are considered to make cross checks to the results obtained. Taking two half pulses suggested to expand the surface current shows savings in computation time and accurate solutions for the corners on the scatterer.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.112-116
• /
• 2002

In this paper, the active integrated antenna(AIA) using a wideband printed dipole antenna and a balanced amplifier is designed and fabricated. The proposed active printed dipole antenna has characteristics of easy matching, wide bandwidth and higher output power To feed balanced signal to printed dipole, a Wilkinson power divider and delay lines are used. The measured result shows that, at 6 GHz center frequency, the impedance bandwidth is 22 % (VSWR < 2), 3 dB gain bandwidth is 28 %, the maximum gain is 14.77 dBi, and output power at P1 dB point is 23 dBm.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.7
• /
• pp.872-880
• /
• 1999

This paper presents an algorithm that can calculate the evaluation index of power system from the transfer capability point of view. The algorithm adopts a successive linear programming skill to solve an optimal solution. Two indices which are transfer margin index and economic matching index have been developed. Prior to calculating these indices, Maximum Load supplying Capability(MLSC) and Economic Load Supplying Capability(ELSC) are utilized as basic data. For man-machine interface, graphical user interface has been implemented so that an unified software package PSTCP(Power System Transfer Capability Program) has been developed. KEPCO systems planned up to 2006 year have been tested to show effectiveness and usefulness of the PSTCP for power system planning stages.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.83-86
• /
• 1985

An alternative technique (or the numerical solution of Fredholm integral equations of second kind is presented. The approximate solution is obtained by fitting the data in mixed form at knots in the region of the problem. To decrease the error in the numerical solution, cubic B-spline functions which are twice continuously differentiable at knots are employed as basis function. For a given example, the results of this technique are compared with those of Moment method employing pulse functions for basis function and delta functions for test function and found to br in good agreement.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.1
• /
• pp.87-92
• /
• 2003

This paper describes a system for tracking multiple faces in an input video sequence using facial convex hull based facial segmentation and robust hausdorff distance. The algorithm adapts skin color reference map in YCbCr color space and hair color reference map in RGB color space for classifying face region. Then, we obtain an initial face model with preprocessing and convex hull. For tracking, this algorithm computes displacement of the point set between frames using a robust hausdorff distance and the best possible displacement is selected. Finally, the initial face model is updated using the displacement. We provide an example to illustrate the proposed tracking algorithm, which efficiently tracks rotating and zooming faces as well as existing multiple faces in video sequences obtained from CCD camera.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.90-95
• /
• 2010

This paper describes the development of integrated head and eye tracker system. Vision based head tracker is performed and it has 7mm error in 300mm translation. The epi-polar method and point matching are used for determining a position of head and rotational degree. High brightness LEDs are installed on helmet and the installed pattern is very important to match the points of stereo system. Eye tracker also uses LED for constant illumination. A Position of gazed object(3m distance) is determined by pupil tracking and eye tracker has 1~5 pixel error. Integration of result data of each tracking system is important. RS-232C communication is applied to integrated system and triggering signal is used for synchronization.