• Journal of The Korean Association For Science Education
• /
• v.37 no.1
• /
• pp.87-101
• /
• 2017

The analysis was carried out with meta-analysis on master's and doctoral dissertations, and academic journals that analyzed the effects of STEAM education between 2012 and 2015. From the total number of 75 dissertations and articles analyzed, 183 different effect sizes were calculated. The analysis was done to find out the kinds of differences that would be created according to the effect size of creativity, problem-solving ability, and researcher, target area, student division research design type, and level of schools. The total effect size of creativity scored 0.776, and demonstrated satisfaction in symmetry of funnel plot, with no publication biases. The fail-safe N scored 780, and since the number is smaller than 8,945, the results of this research has credibility. Furthermore, problem-solving ability shows intermediate level of effect size with a score of 0.584. It also showed satisfaction in symmetry with funnel plot, with no publication bias. With the different research methods of the sub-factors of creativity, fluency scored the highest with 0.929, flexibility with 0.881, originality with 0.838, sophistication with 0.653, abstractness with title 0.705, and resistance to termination, 0.527. This study finds its significance in the demonstration of average effect size of STEAM education through meta-analysis. According to research results, the effects of inclusive education could be determined, yet the specific effect cause or learning principles were difficult to find. It was found that the effects of STEAM education do not rise or fall depending on school age, and demonstrated differences in creativity according to the research methods or the researchers.

• Korean Journal of Optics and Photonics
• /
• v.29 no.4
• /
• pp.139-148
• /
• 2018

In this study, aerosol size distributions were retrieved from aerosol optical depth measured over a range of 10 wavelengths from 250 to 1100 nm. The 10 wavelengths were selected where there is no absorption of atmospheric gases. To obtain the solar spectrum, a home-made solar tracking system was developed and calibrated. Using this solar tracking system, total optical depths (TODs) were extracted for the 10 wavelengths using the Langley plot method, and aerosol optical depths (AODs) were obtained after removing the effects of gas absorption and Rayleigh scattering from the TODs. The algorithm for retrieving aerosol size distributions was suggested by assuming a bimodal aerosol size distribution. Aerosol size distributions were retrieved and compared under various arbitrary atmospheric conditions. Finally, we found that our solar tracking spectrometer is useful for retrieving the aerosol size distribution, even though we have little information about the aerosol's refractive index.

• Journal of Family Relations
• /
• v.22 no.4
• /
• pp.181-204
• /
• 2018

Objectives: The aim of this study is to integrate the results of the previous studies from 1900 to 2016 according to the types of dependent variables individually and statistically to obtain the results of the overall level of the marital education program I need to figure it out. In other words, the general and valid study on the overall effectiveness of the marriage education program will lead to more concluded conclusions and draw up an integrated and holistic conclusion about the effectiveness of the marriage education program. Method: The purpose of this study was to investigate the effect of married couples' education program on married couples' education program. The results of this study are as follows. First, Comprehensive Meta-Analysis. In other words, funnel plot, forest plot, and trim & fill were used to analyze all the variables related to the education of the couple, and homogeneity test After choosing an analytical model for the analysis, we calculated the 'standardized mean difference' effect size (d) that can compare different individual studies through the analytical model. The results of this study are as follows. Results: The purpose of this study was to investigate the overall effect size of domestic couples education programs after 1990, and to investigate the effect sizes of dependent variable types and program - related variables. First, the total effect size of the domestic marriage education program was close to the level of the large effect size and had a substantial and preventive effect. Self-esteem, communication, marital adjustment, emotion, and self control have a substantial and prophylactically significant change depending on the type of subordinate variables related to the marital education program But there was no change in origin family and life satisfaction. Third, as a result of the categorization of the dependent variable categorization of the Korean couple education program, it was found that the marital relations of the participant in the individual inner and the marital relations The effect was significant enough to change. Fourth, Korean couple education program was most effective when mixed age couples were participated in various family life cycle. Conclusions: Based on the results of this study, it is necessary to study more deeply about marital education program effect of marriage education for various special groups such as married couples who are in a crisis of divorce, . It also means that the results of the research for the last 30 years from 1900 to 2016 were comprehensively and systematically summarized through meta - analysis. The results of this study provide information on how to provide the most effective couples education programs for practitioners in the field. The result of this study will be the data of judgment about how to organize the marital education program for people of any ages and characteristics in the future.

• Journal of Magnetics
• /
• v.9 no.2
• /
• pp.27-33
• /
• 2004

Magnetic properties of $Nd_4Fe_{77.5}B_{18.5}$ compound in term of exchange coupling between $Nd_2Fe_{14}B$ and $Fe_3B$ magnetic nano crystals in melt spun powders were characterized by varying the quenching speed in mass production line. The exchange coupled phenomenon was characterized as functions of nano crystal size and volume fraction of each magnetic phase which was possible by employing Henkel plot (${\delta}M$) and refined Mossbauer spectroscopy. The optimized magnetic properties obtained from the present volume production line were: $B_r= 11.73 kG,{_i}H_c/ = 3.082 kOe$, and $(BH)_{max} = 12.28 MGOe.$ The volume fraction of each magnetic phase for those conditions giving the grain size of 10 nm were ${\alpha}-Fe; 4.2%, Fe_3B; 60.1 %$, and $Nd_2Fe_{14}B; 35.7%$. The superior magnetic properties in the $Nd_2Fe_{14}Fe_3B$ based nanocomposites were confirmed to be dependant on the volume fraction of $Fe_3B$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.163-171
• /
• 1999

The abnormal grain coarsening in wire rolling induces detrimental defects, such as jagged size tolorance, severe bending after heat treatments and drawing troubles, in the following secondary processes. Neishi et al observed that there is a band type region where grain coarsenting occurs in the plastic strain vs. deformation temperature plot. Based on the finding, we have investigate whether grain sizes and ferrite volume fractions are correlation to deformation strain with three kinds of wire rod diameters as for the different average deformation conditions. The samples were chosen from the No.2 Wire Rod Mill of POSCO where 3-roll type of finishing mill stand are used. It was found in the present work that the grain size and ferrite volume fraction of the rolled and cooled microstructure were changed with rolling reduction and rolling temperature. Abnormally grown grains at various observed points were also found. To have homogeneously fine grains of microstructure from the No. 2 Wire Rod Mill, it will be easier to control finish rolling temperature at around 750$^{\circ}C$ rather than to find another rolling schedule.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.853-857
• /
• 2015

Background: Gastric cancer is the most common cancer in the Iranian population. The aim of this study was to determine the effect of clinicopathological factors on prognosis by meta-analysis. Materials and Methods: A literature search was conducted using MEDLINE, EMBASE and Cochrane library and extensive literature search using the Persian databases until February 2011. Prospective follow up studies with multivariate analysis of overall survival of the patients with gastric cancer were included in this review. The data were analyzed by CMA.2. Publication bias are checked by funnel plot and data are shown as Forest plots. Results: From a total of 63 articles, 14 retrospective studies which examined 5 prognostic factors and involving 10,500 patients were included. Tumor size (>35mm) was the main significant factor predicting an unfavorable prognosis for the patients with gastric cancer (RR=1.829, p<0.001) followed by presence of distant metastases (RR=1.607, p<0.001), poor differentiation (RR=1.408, p<0.001) and male sex (RR=1.194, p<0.001). Lymph node metastases (RR=1.058, p=0.698) and moderate differentiation (RR=0.836, p=0.043) were not statistically significant as prognostic factors. Conclusions: This meta-analysis suggests that tumor size>35mm, poor differentiation, presence of distant metastasis and male gender are strongly associated with a poor prognosis in Iranian patients with gastric cancer.

• KSTLE International Journal
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2004

Nano-scale studies on adhesion and friction were conducted in Si-wafer (100) using Atomic Force Microscopy (AFM). Glass (Borosilicate) balls of radii 0.32$\mu\textrm{m}$, 1.25$\mu\textrm{m}$, and 2.5$\mu\textrm{m}$, mounted on cantilever (Contact Mode type NPS) were used as tips. Adhesion and friction between Si-wafer and glass tips were measured at ambient temperature (24${\pm}$1$^{\circ}C$) and humidity (45${\pm}$5%). Friction was measured as a function of applied normal load in the range of 0-160 nN. Results showed that, both adhesion and friction increased with the tip radii. Also, friction increased linearly as a function of applied normal load. The effect of tip size on adhesion and friction was explained as the influence of the capillary force exerted by meniscus and that of the contact area on these parameters respectively. The coefficient of friction was estimated in two different ways, as the slope from the plot of friction force against the applied normal load and as the ratio between the friction force and the applied normal load. Both these estimates showed that the coefficient of friction increased with the tip size. Further, the influence of the adhesion force on the coefficient of friction was also discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.10
• /
• pp.157-164
• /
• 2018

The purpose of this study was to investigate the effect of empowerment in nurses through a systematic literature review and meta-analysis. 23 studies were collected through a systematic process of using several databases such as NDSL, DBPIA, and KISS. Keywords included 'nurse', 'empowerment', and 'correlation' and the reviewed articles were published from 2002 to 2017. In order to estimate the effect size of correlation between empowerment, 3 variables (job satisfaction, organizational commitment, and nursing performance) were considered. Using the R program, meta-analysis was calculated by using random effects model, and effect sizes on three types were estimated. As the result, it was found, first, the effect size of correlation between job satisfaction and empowerment is .50. Second, the effect size of correlation between organizational commitment and empowerment is .45. Third, for the nursing performance and empowerment relationship, the effect of correlation is 0.50. Also, Egger's regression test, fail-safe N, trim-and-fill test, and funnel plot were showed to evaluate the results. These results highlights the need for appropriate policies of the relationship between empowerment and job satisfaction, organizational commitment and nursing performance in nurses.

• Korean Chemical Engineering Research
• /
• v.57 no.3
• /
• pp.392-399
• /
• 2019

A highly transparent interfacial layer (HTIL) to enhance the performance of dye-sensitized solar cells (DSSCs) was prepared via a polymer-assisted (PA) approach. Poly(vinyl chloride)-graft-poly(oxyethylene methacrylate) (PVC-g-POEM) was synthesized via atom-transfer radical polymerization (ATRP) and was used as a sacrificial template. The PVC-g-POEM graft copolymer induced partial coordination of a hydrophilic titanium isopropoxide (TTIP) sol-gel solution with the POEM domain, resulting in microphase separation, and in turn, the generation of mesopores upon calcination. These phenomena were confirmed using Fourier-transform infrared (FT-IR) spectroscopy, UV-visible light transmittance spectroscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD) analysis. The DSSCs incorporating HTIL60/20 (consisting of a top layer with a pore size of 60 nm and a bottom layer with a pore size of 20 nm) exhibited the best overall conversion efficiency (6.36%) among the tested samples, which was 25.9% higher than that of a conventional blocking layer (BL). DSSC was further characterized using the Nyquist plot and incident-photon to electron conversion efficiency (IPCE) spectra.

• Structural Engineering and Mechanics
• /
• v.77 no.1
• /
• pp.103-114
• /
• 2021

Ultra high strength concrete (UHSC) originally proposed by Richards and Cheyrezy (1995) composed of cement, silica fume, quartz sand, quartz powder, steel fibers, superplasticizer etc. Later, other ingredients such as fly ash, GGBS, metakaoline, copper slag, fine aggregate of different sizes have been added to original UHSC. In the present investigation, the combined effect of coarse aggregate (6mm - 10mm) and steel fibers (0.50%, 1.0% and 1.5%) has been studied on UHSC mixes to evaluate mechanical and fracture properties. Compressive strength, split tensile strength and modulus of elasticity were determined for the three UHSC mixes. Size dependent fracture energy was evaluated by using RILEM work of fracture and size independent fracture energy was evaluated by using (i) RILEM work of fracture with tail correction to load - deflection plot (ii) boundary effect method. The constitutive relationship between the residual stress carrying capacity (σ) and the corresponding crack opening (w) has been constructed in an inverse manner based on the concept of a non-linear hinge from the load-crack mouth opening plots of notched three-point bend beams. It was found that (i) the size independent fracture energy obtained by using above two approaches yielded similar value and (ii) tensile stress increases with the increase of % of fibers. These two fracture properties will be very much useful for the analysis of cracked concrete structural components.