• Korean Journal of Metals and Materials
• /
• v.50 no.10
• /
• pp.703-710
• /
• 2012

The effects of the ordering reaction on high temperature mechanical behavior is investigated by tensile tests at $2{\times}10^{-2}/s-3.3{\times}10^{-5}/s$ up to $745^{\circ}C$. The tensile deformed region is examined by differential scanning calorimeter (DSC), TEM, and high resolution neutron diffraction (HRPD). The results showed that a plateau of tensile strength appeared at $150-500^{\circ}C$ whereas the elongation minimum occurred at about $600^{\circ}C$. This suggests that the occurrence of a plateau does not cause the elongation minimum. The temperature of the elongation minimum decreases with the strain rate. HRPD results show a lattice contraction in the tensile deformed specimen at the temperature of the plateau occurring region. The plateau of tensile strength, the lattice contraction, and the occurrence of serration appeared in the same temperature region.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.4
• /
• pp.531-538
• /
• 2020

Objective: Evidence from previous reports indicates that pig domestication in East Asia mainly occurred in the Mekong region and the middle and downstream regions of the Yangtze River. Further research identified two new origin centers for domestic pigs in the Tibetan Plateau and the islands of Southeast Asia. However, due to the small sample size of Tibetan pigs, details of the origin and spread of Tibetan pigs has not yet been established. Methods: We analyzed mitochondrial DNA control region (D-loop) variation in 1,201 individuals from nine Tibetan pig populations across five provinces. Comprehensive Tibetan pig samples were taken to perform the most detailed analysis of Tibetan pigs to date. Results: The result indicate that Rkaze pigs had the lowest level of diversity, while Changdu pigs had the highest diversity. Interestingly, these two populations were both in the Tibetan Plateau area. If we calculate diversity in terms of each province, the Tibetan Plateau area had the lowest diversity, while the Chinese province of Gansu had the highest diversity. Diversity gradient analysis of major haplotypes suggested three domestication centers of Tibetan pigs in the Tibetan Plateau and the Chinese provinces of Gansu and Yunnan. Conclusion: We found two new domestication centers for Tibetan pigs. One is in the Chinese province of Gansu, which lies in the upstream region of the Yellow River, and the other is in the Chinese province of Yunnan.

• Transactions of the Korean hydrogen and new energy society
• /
• v.9 no.3
• /
• pp.111-118
• /
• 1998

The intrinsic degradation behavior of $(V_{0.53}Ti_{0.47})_{0.925}Fe_{0.075}$ alloy with BCC structure and the two plateau regions (the low and high plateau region) has been investigate during the temperature-induced hydrogen absorption-desorption cycling (thermal cycling). After 400 thermal cycles between room temperature and $600^{\circ}C$ under 10atm $H_2$, the total reversible hydrogen absorption capacity decreased by about 40%. From thermal desorption analysis it was found that the degradation behavior at each plateau region was different. In addition, XRD analysis showed that the crystal structure of the sample in de-hydrided state was changed from BCC to BCT after degradation, and that of the sample in hydrided state it was maintained as FCC although peaks were broadened after degradation. From the result of static isothermal hydrogenation treatment it were found that crystal structure change from BCC to BCT was caused by the thermal energy. TEM analysis showed that the peak broadening was due to the formation of an amorphous phase in FCC matrix.

• Membrane Journal
• /
• v.12 no.3
• /
• pp.171-181
• /
• 2002

The parameter which determines the plateau length of current-voltage curve for ion- exchange membranes was studied at various concentrations of NaCl and different flow rates. Moreover, the feasibility of the electrodialytic removal of 0.1 M NaCl solution at various current densities was tested by assessing the electrodialysis performance parameters such as salt removal efficiency, current efficiency, energy consumption and water dissociation. The diffusion boundary layer (DBL) thickness decreased with the NaCl concentration and flow rate of fled solution and it was observed that the plateau length of current-voltage curves was related with the DBL thickness. The removal efficiency and current efficiency were not affected significantly by the current densities even at the overlimiting current region indicating that most current were passed by electrolyte, and water dissociations are not responsible for the overlimiting current. Energy consumption increased when the current density supplied exceeded the limiting current density (LCD) values, because additional energy was necessary to overcome the plateau potential. Beyond the LCD values the energy consumption required to get a certain removal efficiency was not affected by the current density applied. The result suggests that it is allowed to operate electrodialysis processes at as high as possible current density unless water-splitting does not occur.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.1
• /
• pp.18-25
• /
• 2001

Electrolytic polishing is the anodic dissolution process in the transpassive state. It removes non-metallic inclusion and improves mechanical and corrosion resistance of stainless steel. If there is a Bailby layer, it will be removed and the true structure of the surface will be restored. Electrolytic polishing is normally used to remove a very thin layer of material from the surface of metal object. A new electrolyte composed of phosphoric, sulfuric and distilled water has been developed in this study. Two current density, high & low current density regions, have been applied in this study. In this study, In the region of high current density, there is no plateau region but excellent electrolytic polishing effect can be accomplished in short machining time because material removel process and leveling process occur simultaneously. In the low current density region, there can be found plateau region. The material removal process and leveling process occur successively. The aim of this work is to determine electrolytic polishing for stainless steel in terms of high & low current density and workpiece surface roughness.

• Journal of the Korean Institute of Gas
• /
• v.7 no.3 s.20
• /
• pp.32-43
• /
• 2003

As this paper is observed the phase equilibrium diagram of mono- (methane) and multi-component(natural gas) hydrates, and the hydrate growth behavior is analysed and compared by the experiments during the reaction. The difference of mono and multi-component hydrates is an induction delay time and a plateau region. And the concentration of component of gases is changed during the reaction in multi-component hydrates and the concentration of components is changed during the decomposition of hydrate according to each decomposing rates of gases. At 6 MPa, 276.65 K and 600 rpm, the induction delay time of multi-component hydrate formation is observed shorter than that of mono-component hydrate formation because the hydrate nuclei of gases except methane form faster than those of methane. And the plateau region of mono-component hydrate is observed distinctly at 0.055 mole of $CH_4$/mole of water and that of multi-component hydrate is observed at 0.04 mole of $CH_4$/mole of water.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.7
• /
• pp.73-86
• /
• 2006

Concentrated poultry production in the State of Alabama, U.S.A. results in excessive poultry litter. Application of poultry litter to pastures and row crops serves as a cheap alternative to commercial fertilizer. However, over the years, poultry litter application to perennial forage crops in the Appalachian Plateau region of North Alabama has resulted in phosphorus (P) buildup in soils. Phosphorus index (P-index) and comprehensive nutrient management plans (CNMP) are often used as a best management practice (BMP) for proper land application of litter. Because nutrient management planning is often not done for small animal feeding operations (AFOs), and also because, in case of excess litter, litter transportation infrastructure has not been developed, over application of poultry litter to near by area is a common practice. To alleviate this problem, optimal poultry litter management and transportation infrastructure needs to be developed. This paper presents a methodology to optimize poultry litter application and transportation through efficient nutrient management planning and transportation network analysis. The goal was accomplished through implementation of three important modules, a P-Index module, a CNMP module, and a transportation network analysis module within ArcGIS, a Geographic Information System (GIS). The CNMP and P-Index modules assist with land application of poultry litter at a rate that is protective of water quality, while the transportation network analysis module helps transport excess litter to areas requiring litter in the Appalachian Plateau and Black Belt (a nutrient-deficient area) regions. Once fully developed and implemented, such a system will help alleviate water quality problems in the Appalachian Plateau region and poor soil fertility problems in the Black Belt region by optimizing land application and transportation. The utility of the methodology is illustrated through a hypothetical case study.

• Journal of the Korean Geographical Society
• /
• v.48 no.2
• /
• pp.167-183
• /
• 2013

This paper aimed to investigate the Asian dust source region and climatic condition of source region by the case of Asian dust in south Korea. In order to analyze the weather condition of source region, observed the Asian dust days data and weather data in China were used. The Asian dust days originating from inner-Mongolia were the most frequent. The Asian dust days originating from all the source regions except Loess plateau were increased recently and occurred over the country. In case of Loess plateau, the frequency of the Asian dust days in 1960s was the highest and only the southern region of the south Korea was mostly affected. The relationship between the Asian dust days of Korea and climatic factors of spring and April of source region was significant. The relationship between the Asian dust days originating from the inner Mongolia and sea level pressure of April and relative humidity of spring was negative. The Asian dust days from Gobi had positive relationship with wind gust days and negative relationship with sea level pressure in April. The Asian dust days from Manchuria had negative relationship with precipitation and sea level pressure in April. The Asian dust days from Loess plateau had positive relationship with maximum wind speed and negative relationship with sea level pressure in April.

• Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.117-128
• /
• 2019

Background: Cliffs are a major plant habitat around the coastal area, but in contrast to sand dunes and salt marshes, they have been little investigated in Korea. There are simple descriptions of cliff vegetation in studies on island vegetation, but there is no published paper, which addressed sea cliff vegetation synthetically. Furthermore, the coastal area where this study was carried out was designated as a conservation reserve. Even though, this area is exposed to intense recreational use such as trekking in these days. This study aims to clarify spatial distribution and structure of vegetation along the environmental gradient on coastal cliff and plateau in the Janggi peninsula (Homigot) located on southeastern Korea. Further, this study has also another objective to prepare a restoration plan to protect this conservation reserve from intense human disturbance. Results: Landscape elements were arranged in the order of sea cliff risen directly on the sea, seashore, coastal cliff, and plateau covered with relatively deep soil in a coastal area of the Janggi peninsula (Homigot), southeastern Korea. Vegetation was sampled at 59 plots arranged from the sea cliff through the seashore and coastal cliff to plateau. The sea cliff, seashore, and coastal cliff, which compose the coastal landscape, were dominated by the seashore spatulate aster (Aster spathulifolius Maxim.) community, dwarf sand sedge (Carex pumila Thunb.) community, and seashore spatulate aster (Aster spathulifolius Maxim.) community. On the plateau corresponding to the ridge of the coastal cliff, black pine (Pinus thunbergii Parl.) community, golden rain tree (Koelreuteria paniculata Laxmann) community, east Asian hackberry (Celtis sinensis Pers.) community, sawleaf zelkova (Zelkova serrata Makino) community, and Korean oak (Quercus dentata Thunb.) community were established in the mentioned order along distance from the sea. Stand ordination showed a vegetation sequence from the seashore through the cliff to the plateau, consistent in its overall pattern among sites. This was dominated by topography. There is evidence for the importance also of salinity, drought and of soil depth. Conclusion: The lack of scientific interest in cliffs to date is in striking contrast to the commonness of cliffs around the whole national territory and to the attraction cliffs have had for humans throughout history. Cliffs provide a unique habitat, rarely investigated from an ecological viewpoint. Cliffs may represent an invaluable type of ecosystem, consisting of some of the least disturbed habitats on earth and contributing more to the biodiversity of a region than their surface coverage would indicate. Although this coastal area where this study was carried out was designated as a conservation reserve, this area is in danger of severe disturbance due to excessive recreational use. We recommended a restoration plan to protect this area from such a disturbance.

• Korean Journal of Food Science and Technology
• /
• v.39 no.5
• /
• pp.584-587
• /
• 2007

The effect of molar substitution (MS, 0.030-0.118) on the dynamic rheological properties of hydroxypropylated rice starch pastes (5%, w/w) was investigated by small-deformation oscillatory measurements during aging. The magnitudes of storage (G#) and loss (G") moduli measured at $4^{\circ}C$ before aging increased with an increase in MS in the range of 0.030-0.118, while those of tan ${\delta}$ (the ratio of G"/G#) decreased. The G# values of hydroxypropylated rice starches, as a function of aging time (10 hr) at $4^{\circ}C$, increased rapidly at the initial stage, and then reached a plateau region at shorter aging times. However, for the native starch, the plateau values were not observed for G# after a long aging time. Increasing the MS resulted in a decrease in plateau values. The rate constant (K) for structure development during aging was described by first-order kinetics. The K values of hydroxypropylated rice starches at 0.086 and 0.118 MS were much lower than the K value at 0.030 MS.