• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1087-1088
• /
• 2011

• 소성∙가공
• /
• 제4권1호
• /
• pp.17-27
• /
• 1995

The tact switch is widely used in electric and electronic products. The dome type tact spring is produced by stamping. Stamping of the tact spring and operation of the tact switch have been simulated by the elasto-plastic finite element method. The operating characteristics of the switch may be given by the relation between the operating force and stroke. For a given material, this is affected by two main factors. One is the geometry of dome spring which is determined by the geometry of stamping dies and the stamping pressure, and another one is the dimension of switch. From the calculation, it was possible to obtain the stamping conditions and switch dimension for a predetermined force-stroki relation And, the hoop stresses and effective strains distributions due to the stamping and during the operation of the switch indicate a possibility of cracking in the center and rim of dome spring.

• International Journal of Contents
• /
• 제15권4호
• /
• pp.50-58
• /
• 2019

Baotu Spring Park, a must-visit place in Jinan, China, has been rated as the country's highest-level scenic spot by the Chinese government. However, social media that highly reflects public opinions tends to express a lower evaluation of Baotu Spring Park. Thus, this paper employs service design thinking methods to identify the problems of Baotu Spring Park and provide solutions from the perspective of visitors. Based on desk research, tourist behavior tracking, contextual interviews, and a customer journey map, it was found that the service gap of Baotu Spring Park lacks a unified and effective instruction system. Also, the activities, parking, and high-quality tourist souvenirs are deficient, and there is no online information delivery platform. Finally, five suggestions are made,-respectively:,- redesign the sign system, enhance the participation of tourists, redesign the tourist souvenirs and display space, offer parking areas and shuttle buses, as well as set up a dedicated application.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.91-96
• /
• 2002

There are many methods for analyzing underground box structures. One is the method of Iterative removal of tensional spring. The other is the method of modeling of ground to 8-node elastic-plastic planar element. In this study, We use inelastic soil spring element for analyzing underground box structures. First, if N-value is over 50, the results of inelastic soil spring method is the same as the method of 8-node planar element in last stage. Second, as N is increasing, element forces in two methods are generally decreasing. Third, as N-value is increasing, element forces in two method are generally decreasing and displacement has decreasing incline. This is the same as the force-displacement curve of general underground structures.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.290-297
• /
• 1998

In this paper, we propose to a method to estimate the elasto-plastic buckling for single layer latticed domes. First, we assume that each member consists of the rigid zone and elastic spring at both end joint, the elastic element and three elasto-plastic spring to judge for yeilding the member. Next, the member which has most influence on buckling for structures is determined by a distributed pattern of the strain energy which is calculated through linear eigenvalue analysis. And then, normalized slenderness ratio of the element is derived considering the axial force at elastic buckling load. Later, we execute elasto-plastic nonlinear analysis that based on loading increasement method and displacement increasement method. From this results, we discusses the effect of the joint rigidity and the half open angle $\theta$$_{0}$ on the buckling strength of single layer lattice domes ; (1) how the joint rigidity contributes to the reduction of buckling loads, (2) how the reduction can be interrelated to compressive strength curves in terms of the generalized slenderness for the member most relevant to the overall buckling of domes.s.

• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1471-1481
• /
• 2009

In diesel engines, it is inevitable that the torsional vibration is produced by the fluctuation of engine torque. Therefore, it is necessary to establish preventive measures to diminish the torsional vibration. The sleeve spring type damper is one of the preventive measures for reducing the torsional vibration. In this study, the closed form equations to predict the spring constant of a sleeve spring and the torsional characteristics of the torsional vibration damper are proposed to calculate stiffness of the damper and verified their availability through the finite element analysis and experiments. And the stability of the sleeve spring torsional vibration damper is verified by analyzing the inner star and outer star, which are the core parts of the damper, and 2-roll bending process is proposed to manufacture sleeve spring. The program to calculate the initial radius including spring-back effect is developed, and the FEA method to analyze elasto-plastic problem was verified through analysis of 90$^{\circ}$bending process. The results of the analysis are in good agreements with those of the experiments. The newly proposed method can be used as an advanced technique that remarkably curtails cost of production and replaces the conventional forming.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.246-255
• /
• 2016

When spring of the suspension is exerted by an external load, a car should be designed to prevent predictable damages and designed for a ride comfort. We used experiments design to design VON-MISES STRESS and K, a constant, of spring of suspension which is installed in a car as a goal level. We analyzed the result from Edison's Elastic - Plastic Analysis SW(CSD_EPLAST) by setting D, d, n as external diameter of coil, internal diameter of coil, the number of total coil respectively. The experiment design let the outcome be as Full-second order by using Box-Behnken which is one of response surface methods. Experimented and analyzed results based on the established experiments design, We found out design parameter which has desired VON-MISES STRESS and the constant K. Additionally, we predicted life time of when the external load was exerted by repeated load by using fatigue equation, and verification of plastic deformation has also been made. Additionally we interpreted a model, which is formed by optimized design parameter, with linear analysis and non-linear analysis, at the same time we also analyzed plastic deformation with the values from the both models. Finally, we predicted fatigue life of optimized model by using fatigue estimation theory and also evaluated a ride comfort with oscillation analysis.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.216-222
• /
• 1996

This paper presents a computational technique to predict roof crush resistance in early design stage of passenger car development. This technique use a simple F.E. model with nonlinear spring elements which represent plastic hinge behavior at weak areas. By assuming actual sections as equivalent simple sections, maximum bending moments which weak areas in major members can stand are theoretically calculated. Results from prediction of roof crush resistance are correlated well with test results.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제12권3호
• /
• pp.208-217
• /
• 2006

본 논문은 소성변형(plastic deformation)특성을 갖는 직물의 움직임을 시뮬레이션하는 기법을 제안한다. 소성은 탄성과 반대되는 개념으로, 물질이 외부의 힘에 의해 변형되었을 때, 초기상태로 완전히 회복되지 못하는 성질이다. 직물은 파티클 모델(particle model)을 이용하여 모델링하며, 파티클간의 상호작용은 바로 인접한 파티클간의 순차연결과 한 파티클 건너에 있는 파티클간의 교차연결을 설정함으로써 표현한다. 순차연결은 직물의 압축과 인장변형을, 교차연결은 직물의 굽힙변형을 표현한다. 연결은 스프링으로 모델링하는데, 순차연결은 탄성스프링으로, 교차연결은 변형정도에 따라, 탄성스프링 또는 소성스프링으로 모델링한다. 본 논문은 기존의 파티클 모델에서 사용하는 탄성스프링에 소성스프링을 추가하여 직물의 소성변형 현상을 표현한 것이다. 그 결과, 굽힘주름과 영구변형된 구김주름, 그리고 주름이 직물 전체에 고루 분포되는 현상을 시뮬레이션할 수 있었다. 연결의 탄성스프링과 소성스프링을 모델링할 때 직물운동방정식 수치해법의 안정성을 보장하기 위해 직물 시스템의 강성 메트릭스 (stiffness matrix)가 indefinite이 되지 않도록 주의를 기울였다.

• 한국환경농학회지
• /
• 제35권3호
• /
• pp.202-210
• /
• 2016

BACKGROUND: This study was conducted to determine effects of ridging systems and plastic film mulch types on growth, yield, and profitability of potato (Solanum tuberosum L.) in spring cropping using paddy field and to suggest profitable ridging system and plastic mulch type.METHODS AND RESULTS: Two potato cultivars ('Goun', and 'Atlantic') were grown at paddy field located in Gangneung in spring. For treatments, ridging systems were one-row ridge (OR) and two-row ridge (TR). Mulch types were no-mulch (NM), black plastic film mulch (BPM), and transparent plastic film mulch (TPM). Emergence of sprout was affected by the mulch types and the fastest level was shown at TPM treatment. Accumulative soil temperature during sprouting was 16.2℃ higher at TR than at OR and also higher at TPM than at BPM or NM. Stem length was not affected by ridging systems or mulch types. Leaf area index (LAI) was influenced by mulch types, while not by ridging systems. The highest LAI was shown at TR with TPM and OR of BPM. There was no significant difference in specific gravity or dry matter rate by ridging systems and mulch types. Tuber yield was significantly influenced by ridging systems and mulch types. Mean tuber weight was heavier at OR treatment than at TR and also the heaviest at TPM among mulch types. The highest marketable yield was found at OR with BPM. Based on marketable tuber yield and market price, the highest income ratio in two cultivars was found at OR with BPM and it was 20~82% higher than the ratio at TR with TPM.CONCLUSION: In spring potato cropping using paddy field, OR with BPM is better for high yield and is more profitable for farmer's income than the conventional cultivation method, TR with TPM.