• Food Science and Preservation
• /
• v.6 no.3
• /
• pp.270-275
• /
• 1999

During the storage period of chives(Allium Tubersum fouler) at low temperature(4-5$^{\circ}C$), weight loss in chives by the packages of LDPE, p.p and HDPE film was decreased less than 1%, however that of chives unpacked was remarkably increased as time went by. Soluble solids of unpacked chives was decreased from 6.0 to 4.6 $^{\circ}$Brix after 2 weeks storage and that of LDPE film sealed was lessened to 4.9-5.9 $^{\circ}$Brix, the treatment of deaeration showed a tendency to decrease a lot to 4.5-4.7 $^{\circ}$Brix. The vitamin C content of chives unpacked was 37.1mg% at before storage, but after one week decreased very much to 15.2mg%, and that in chives packed by the different methods was visibly lessened after 2 weeks storage. the Vitamin C content in chives processed by deaeration sealing method was lessened compared to that at chives processed by sealing only. In the bag of chives packed by HDPE film had low CO$_2$ and C$_2$H$_4$ concentration and the gas concentration in the bag of chives processed by P.P. film was increased as storage period went by. Conclusively the freshness of chives packaged by LDPE and HDPE film maintained for 3 weeks, at P.P film for 2 weeks, but the marketability of chives unpacked was degraded in 3-4 days.

• Food Science and Preservation
• /
• v.17 no.6
• /
• pp.908-913
• /
• 2010

Modified atmosphere packaging (MAP) was evaluated for the storage of pumpkin rice cake as a means of preserving quality and extending shelf-life. Retail-sized amounts of rice cake were packaged in trays under different modified atmosphere conditions (air, vacuum, 60% $CO_2$/40% $N_2$ and 100% $CO_2$) using gas-barrier plastic film; control was in air-permeable stretch wrap. The packages were stored at $20^{\circ}C$ with periodical measurement of package atmosphere and cake quality attributes. The modified atmosphere packages of 60% $CO_2$/40% $N_2$ and 100% $CO_2$ inhibited the growth of molds/yeasts completely and significantly retarded the growth of aerobic bacteria. All the packages except that of 100% $CO_2$ showed the reduction of internal $O_2$ concentration and increase of the $CO_2$ with storage time due to the microbial activity. There has been slight decrease of $CO_2$ concentration for 60% $CO_2$/40% $N_2$ and 100% $CO_2$ packages just after start of the storage possibly due to dissolution of headspace $CO_2$ into the cake. Any MAP conditions did not affect the retrogradation of the rice cake. Surface color of the cake within affordable microbial quality limit was not affected significantly by packaging conditions.

• Journal of Animal Science and Technology
• /
• v.47 no.1
• /
• pp.39-48
• /
• 2005

Outside muscle of pork ham were cut to cube(7 $\times$ 10 $\times$2 ern) and three Korea traditional seasonings such as soybean paste(Tl), garlic paste(T2), red pepper paste(T3) were seasoned by the proportions of meat to seasonings(1 : 1), respectively. The seasoned samples were fermented by fill into plastic box at 0 $\pm$ 1 $^{\circ}C$ for 10 days. And then, the fermented meat from each pack was vacuum-packaged and stored at 0 $\pm$ 1 $^{\circ}C$ for up to 9 weeks. pH and shear force were decreased during storage periods in all treatment groups and WHC was decreased with storage in T2. The saccarinity of T1 was increased and salinity increased during storage in all treatment groups. pH of T2 was increased than that of other treatments, while decreased saccarinity and shear force of in T2. The salinity were higher in the order of T1 > T2 > T3. Volatile basic nitrogen (VBN) value were increased with storage in all treatment groups. Thiobarbituric acid reactive substances (TSARS) value of Tl was increased with storage while it was decreased T2. Thiobarbituric acid reactive substances(TSARS) value was higher in the order of T1 > T3 > T2 at 9weeks of storage. Surface meat L' values of T1 was increased with storage and T3 decreased with storage whereas, surface meat a' values of T1 was decreased with storage, and T2 was increased with storage. Surface meat b' values of T3 was decreased with storage. Escherichia coli were decreased during storage periods in all treatment groups.

• The Korean Journal of Nuclear Medicine
• /
• v.33 no.4
• /
• pp.430-438
• /
• 1999

Purpose: We evaluated a rapid preparation procedures for the labeling and quality control of $^{99m}Tc$-ECD, $MAG_3$, and MIBI using microwave heating and Sep-Pak cartridges. Materials and Methods: $^{99m}Tc$ labeling of ECD, $MAG_3$, and MIBI kit preparation was performed according to the package inserts with microwave heating modification. Heating time was 10-15 sec, and heating was performed with 3 mm plastic bottle with screw cap to prevent radiation contamination. Labeling efficiency was obtained with $C_{18}$ or Alumina N Sep-Pak cartridges. Results: The radiochemical purity of $93{\sim}96%$ for $^{99m}Tc$-ECD and $95{\sim}99%$ for $^{99m}Tc$-MIBI was obtained using Alumina N Sep-Pak cartridge. The optimum irradiation time of microwave method for 3 ml $^{99m}Tc$-labeled radiopharmaceutical solution was 10 sec for $^{99m}Tc$-ECD and $^{99m}Tc$-MIBI, and 15 sec for $^{99m}Tc-MAG_3$. The results of quality control data with Sep-Pak cartridges were well correlated with TLC method. The total preparation time of these radiopharmcaeuticals was $5{\sim}6min$ including quality control procedure. Conclusion: This study demonstrates that radiopharmaceuticals preparation by microwave heating and quality control by Sep-Pak cartridges can be efficiently utilized as an alternative to the recommended method by manufacturer's manual.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.175-182
• /
• 2017

In light emitting diode (LED) chip packaging, wire bonding is an important process that connects the LED chip on the lead frame pad with the Au wire and enables electrical operation for the next process. The wire bonding process is divided by two types: thermo compression bonding and ultrasonic bonding. Generally, the wire bonding process consists of three steps: 1st ball bonding that bonds the shape of the ball on the LED chip electrode, looping process that hangs the wire toward another connecting part with a loop shape, and 2nd stitch bonding that forms and bonds to another electrode. This study analyzed the factors affecting the LED die bonding processes to optimize the process capability that bonds a small Zener diode chip on the PLCC (plastic-leaded chip-carrier) LED package frame, and then applied response surface analysis. The design of experiment (DOE) was established considering the five factors, three levels, and four responses by analyzing the factors. As a result, the optimal conditions that meet all the response targets can be derived.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.100-105
• /
• 2019

In this study, viable cells, coliforms and food poisoning bacteria were identified according to the pH levels of the coagulant and immersion liquid during each stage in the production of konjac, and storage stability was confirmed for 3 months. A considerable number of bacteria were found in the raw material, or powdered konjac (Amorphophallus konjac), as well as in the processing water. However, it has been shown that the plastic package were safe from microorganisms. Due to the high pH of the added coagulant [2.0% $Ca(OH)_2$], no contaminating bacteria were observed after konjac jelly formation. Coliforms were not detected any of the tested steps. During the molding process, the pH of konjac was adjusted to 9.5 ~ 12.5 at intervals of 0.5, and the number of bacteria was determined. As a result, no bacteria were detected in the alkaline range above pH 11.5. The pH of the immersion liquid was adjusted to 10.0 ~ 12.5, and after hardening, the konjac were stored at room temperature for 12 weeks. As a result, no bacteria, Escherichia coli or other food poisoning bacteria were detected at pH 11.5 or higher. Based on these results, it is expected that when the pH levels of the konjac and its immersion liquid are maintained at 11.5, it should be possible to keep the product for 3 months without additional sterilization process.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.116-122
• /
• 2014

This study was conducted to find out the appropriate packaging materials to extend the storability and maintain the quality of cherry tomato for modified atmosphere (MA) storage. Tomatoes were grown by hydroponic at a plastic house in Gangwon Province. Light red maturity stage tomatoes were harvested and packed with MA condition (10,000; 20,000; 40,000; 60,000; 80,000; and $100,000cc/m^2.day.atm$ $O_2$ permeability film) and perforated film to store at $5^{\circ}C$, $11^{\circ}C$ and $24^{\circ}C$. The fresh weight loss was less than 0.6% in all non-perforated breathable films at $^5{\circ}C$, $11^{\circ}C$, and $24^{\circ}C$, but perforated film had less than 2.93% at $5^{\circ}C$, 13.29% at $11^{\circ}C$ and 27.24% at $24^{\circ}C$. The 20,000cc at $5^{\circ}C$ and $11^{\circ}C$, and the 40,000cc film at $24^{\circ}C$ balanced optimum carbon dioxide and oxygen concentration in the package to maintain quality. The 10,000cc film was appeared the significantly highest ethylene concentration at $5^{\circ}C$, $11^{\circ}C$, and $24^{\circ}C$, this film had the lowest $O_2$ permeability. Visual quality, firmness, and soluble solids were maintained in 20,000cc films both at $5^{\circ}C$ and $11^{\circ}C$, the 40,000cc film at $24^{\circ}C$. There was no any trend in titratable acidity and vitamin C content of treated packed film types and temperatures at cherry tomatoes packages. Therefore, the appropriate MA condition for $5^{\circ}C$ and $11^{\circ}C$ is $20,000cc/m^2.day.atm$ $O_2$ permeability film; for $24^{\circ}C$ it is $40,000cc/m^2.day.atm$ $O_2$ permeability film because those films extended the storability through the firmness, soluble solids as well as visual quality.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.3
• /
• pp.113-120
• /
• 2014

Packaging has played important function on marketing as a silent salesman. As an interface of consumer and products, packaging fulfills several functions such as protection, sales promotion, communication and convenience during the distribution process. For the appearance of self-service sales method, packaging could be regarded as important salesman influencing consumers' preference on shelf in the shop. In this study, Vitamin water was selected as the proper target product for lower impact of prices and brands. With previous studies, Vitamin water packaging elements were classified as 'packaging material', 'packaging shape', 'label color', 'logo layout', then each packaging element was consist of details. To measure the influence of each packaging element on consumers' preference quantitatively and to minimize respondent's subjective judgment, Analytic Hierarchy Process (AHP) was used as a tool. Through AHP result, packaging element of the most influence on consumers' preference is 'label color (0.370)', and 'container shape (0.246)', 'container material (0.230)', 'logo layout (0.154)' was in order. Among the detail packaging element, 'plastic (0.405)' has the greatest influence in 'container material' and 'cylinder (0.423)' in 'container shape', 'magenta (0.329)' in 'label color', 'vertical layout (0.572)' in 'logo layout'.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.679-690
• /
• 2005

This study was carried out to evaluate the quality characteristics of aerobic packed pork during storage after fermentation with soy sauce, red pepper and soybean paste seasonings. The ham of pork were cut to cube($7{\time}10{\time}2$cm) and Korea traditional seasonings such as soy sauce(T1), red pepper paste(T2), soybean paste(T3) were seasoned by the proportions of meat to seasonings(1:1), respectively. The seasoned sample were fermented by fill into plastic box at $1{\pm}1^{\circ}C$ for 10 days. And then, the fermented meat from each pack was aerobic packed and stored at $1{\pm}1^{\circ}C$ for up to 28 days. The pH of T1 were significantly(P<0.05) lower compared to T2 and T3 at 1 day of storage, but were significantly(P<0.05) higher at 14 and 28 days of storage. The water-holding capacity of T1were significantly(P<0.05) higher compared to T2 and T3 at 1 and 28 days of storage. The shear force of T3 were significantly(P<0.05) lower compared to T1 during storage. The surface meat L* values of T3 were significantly(P<0.05) higher than those of T1 and T2, but a* and b* values of T2 were significantly(P<0.05) higher. The volatile basic nitrogen(VBN) of T3 were significantly(P<0.05) lower compared to T2 at 1 and 14 days of storage, but T1 were significantly(P<0.05) lower at 28 days of storage. The thiobarbituric acid reactive substances(TBARS) of T3 were significantly(P<0.05) lower compared to T1 and T2. The total plate counts of T1 were significantly(P<0.05) lower compared to T2 and T3 at 1 day of storage, but T2 were significantly(P<0.05) lower at 14 and 28 days of storage. The Escherichia coli of T1 and T3 were significantly(P<0.05) lower compared to T2 at 1 day of storage. The Lactobacilli spp. of T2 were significantly(P<0.05) lower compared to T1 and T3.