• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.3
• /
• pp.273-280
• /
• 1994

The Magnetic Resonance Imaging has been used widely to evaluate the disk position without any interruption of the TMJ structures, and the Dynamic MRI presenting computed serial imaging or the video-recorded simulation images is thought to be very effective to evaluate the disk position under function. This is to study the correlation between the clinical diagnosis and the findings of Dynamic MRI for the diagnosis of internal derangement of the temporomandibular joints. 30 joints(15 patients) were examined clinically, and the movement of TMJ meniscus was reviewed in the dynamic MRI. The comparative results are as follows : 1. All internal derangements of TMJ disk displacement without reduction were consistent with MRI findings. 2. 5 joints (50%) of disk displacements with reduction could not be confirmed by MRI findings. 3. The disk displacements in MRI were found in 55% of painful joints, 50% of clicking joints, and 70% of the joints with restricted movement. 4. The reliability of MRI for the diagnosis of TMD was evaluated as 77% ; 24 of 30 joints who presented with clinical diagnosis of TMD. 5. MRI is very reliable to diagnose the disk displacement without reduction, but it is rather not so effective to diagnose the early derangement or muscle disorders.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.2
• /
• pp.238-242
• /
• 2000

Recurrent mandibular dislocation is frequent morbidity of temporomandibular joint relatively. There are many etiologic causes in TMJ disorders but, difficult to find obvious one. Various treatment methods have been utilized for a mandibular dislocation. It is categorized into two groups broadly - nonsurgical or surgical methods. The basic rationale of the surgical method is to allow free movement of the condyle by reducing height of articular eminence or to limit anterior excessive movement of the condyle by increasing height of articular eminence or soft tissue anchoring procedure. In this case, 69 year-old woman was treated by augmentation of the articular eminence with mandibular symphysial bone graft leading to osteosynthesis without difficulty. As a result, favorable postoperative outcome was obtained functionally without any complication or recurrence.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.4
• /
• pp.319-322
• /
• 2011

Purpose: The purpose of this study was to examine the appropriate degree of set-back of the mandible by evaluating the rate of relapse after surgery. Methods: Among the patients who visited our hospital from January 2002 to January 2007 and who underwent orthognathic surgery, of the patients available for follow-up observation, the rate of relapse after surgery was investigated according to the set-back degree. The patients were divided into groups by the degree of set-back, and relapse was evaluated by the radiographs performed the day after surgery, 6 months after surgery, 1 year after surgery, 2 years after surgery and 3 years after surgery. Results: In cases that exceeded the limit of posterior movement of the mandible (13 mm) or that had the wrong position of the condyle, a greater tendency toward relapse was shown. Conclusion: Based on the results of this study, among the cases that required a large amount of posterior movement of the mandible, two jaw surgeries accompanied by bilateral sagittal split ramus osteotomy (BSSRO) and LeFort I osteotomy are recommended.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.1
• /
• pp.23-27
• /
• 2010

The purpose of this study was to evaluate the reliability of 6-axis model surgery simulator (6AMSS) for orthognathic surgery. A rectangular parallelepiped plastic block was assembled to model-mounting plate of 6AMSS. Left-right (X), anterior-posterior (Y), up-down (Z) translation and pitching (${\phi}X$), rolling (${\phi}Y$) and yawing (${\phi}Z$) rotation was planned and performed using 6AMSS. The actual translation and rotation were measured with dial gauge and precisional protractor, respectively. Comparison between the planned and actual movements of plastic block for each variable were made using paired t- test. Statistical analysis for X, Y, Z, ${\phi}X$, ${\phi}Y$ and ${\phi}Z$ movement have shown no significant differences between planned and actual movement (P > 0.05). This indicate that model surgery performed with the aid of the 6AMSS is accurate in 3D translation and rotation. The 6AMSS is practically useful for accurate fabrication of surgical splint for orthognathic surgery.

• Archives of Craniofacial Surgery
• /
• v.13 no.1
• /
• pp.4-10
• /
• 2012

Purpose: The objective of this retrospective study was to assess the skeletal stability after orthognathic surgery for patients with cleft lip and palate. The soft tissue changes in relation to the skeletal movement were also evaluated. Methods: Thirty one patients with cleft received orthognathic surgery by one surgeon at the Craniofacial Center, Chang Gung Memorial Hospital, Taoyuan, Taiwan. Osseous and soft tissue landmarks were localized on lateral cephalograms taken at preoperative (T0), postoperative (T1), and after completion of orthodontic treatment (T2) stages. Surgical movement (T0.T1) and relapse (T1.T2) were measured and compared. Results: Mean anteroposterior horizontal advancement of maxilla at point A was 5.5 mm, and the mean horizontal relapse was 0.5 mm (9.1%). The degree of horizontal relapse was found to be correlated to the extent of maxillary advancement. Mean vertical lengthening of maxilla at point A was 3.2 mm, and the mean vertical relapse was 0.6 mm (18.8%). All cases had maxillary clockwise rotation with a mean of 4.4 degrees. The ratio for horizontal advancement of nasal tip/anterior nasal spine was 0.54/1, and the ratio of A' point/A point was 0.68/1 and 0.69/1 for the upper vermilion/upper incisor tip. Conclusion: Satisfactory skeletal stability with an acceptable relapse rate was obtained from this study. High soft tissue to skeletal tissue ratios were obtained. Two-jaw surgery, clockwise rotation, rigid fixation, and alar cinch suture appeared to be the contributing factors for favorable results.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.6
• /
• pp.535-544
• /
• 2005

The management of mandibular condyle fractures continues to be a subject of much debate. It is suggested that, if not properly managed, these fractures may give rise to serious problems, such as malocclusion, mouth opening limitation, temporomandibular joint disorders. Treatment planing of mandibular condyle fractures is very important. The aim of this present study was to evaluate the long-term results according to treatment methods in condylar fractures. Also, it was to evaluate results of treatment according to condylar fracture level. We conducted a retrospective analysis of 43 mandibular condyle fractures. 43 patients followed for average period of 9.00 years(mini. 7yr, max. 12yr). All patients underwent a clinical and radiologic evaluation focusing on mouth opening, mandibular movements, TMJ function, change of ramal height, condylar remodelling. If the level of fracture was positioned in high, especially in level II, mandibular movement disability and ramus length loss was more prominent. This results were similar to the cases of treatment of fragment removal. In high level fracture and fragment removal cases, It is thought that more intensive and long term management are needed than other treatment cases using different operation methods. Also, direct fixation by each approach showed good results in mandibular movement, ramal height change and condylar shape. Through this results, accurate reduction of the mandibular condyle fractures was a very important factor in postoperative prognosis.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.3
• /
• pp.343-350
• /
• 2000

The goal of this study is the comparison of upper airway size and change of skeletal Class I group and skeletal Class III group (before operation, within 2 weeks after operation, 6 months after operation) respectively. At first, we measured the lines between selected upper air way landmarks on lateral cephalometric x-ray film of skeletal Class I 40 persons whoes age were 23-26 years old, ,and did the same lines of landmarks of skeletal Class III 44 persons who had not been operated yet, were within 2 weeks after operation, were 6 months after operation. And we compared it respectively and analyzed it with paired t-test. We studied the relationship of those on produced data. 1. Skeletal Class III group was narrower in nasopharyngeal air way space than that of skeletal Class I group, and increased in thickness of oropharyngeal, hypopharyngeal wall within 2 weeks after operation, and reduced in nasopharyngeal, oropharyngeal air way space, and did in thickness of nasopharngeal, hypopharyngeal wall 6 months after operation. 2. Skeletal Class III group reduced in nasopharyngeal, oropharyngeal air way space, and increased in thickness of nasopharyngeal, oropharyngeal, hypopharyngeal wall within 2 weeks after operation, restored the thickness of nasopharyngeal, oropharyngeal wall, but did not restored nasopharyngeal, oropharyngeal, hypopharyngeal air way space. 3. Vertical length from hyoid bone to mandibular plane did not have signifacant difference from Class I group but after operation, it increased more than Class I group significantly. 4. The size of airway reduced after operation. Among this, oropharyngeal airway most reduced.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.27.1-27.9
• /
• 2020

Background: Mandibular setback surgery can change the position of the mandible which improves occlusion and facial profile. Surgical movement of the mandible affects the base of the tongue, hyoid bone, and associated tissues, resulting in changes in the pharyngeal airway space. The aim of this study was to analyze the 3-dimensional (3D) changes in the hyoid bone and tongue positions and oropharyngeal airway space after mandibular setback surgery. Methods: A total of 30 pairs of cone-beam computed tomography (CBCT) images taken before and 1 month after surgery were analyzed by measuring changes in the hyoid bone and tongue positions and oropharyngeal airway space. The CBCT images were reoriented using InVivo 5.3 software (Anatomage, San Jose, USA) and landmarks were assigned to establish coordinates in a three-dimensional plane. The mean age of the patients was 21.7 years and the mean amount of mandibular setback was 5.94 mm measured from the B-point. Results: The hyoid bone showed significant posterior and inferior displacement (P < 0.001, P < 0.001, respectively). Significant superior and posterior movements of the tongue were observed (P < 0.05, P < 0.05, respectively). Regarding the velopharyngeal and glossopharyngeal spaces, there were significant reductions in the volume and minimal cross-sectional area (P < 0.001). The anteroposterior and transverse widths of the minimal cross-sectional area were decreased (P < 0.001, P < 0.001, respectively). In addition, the amount of mandibular setback positively correlated with the amount of posterior and inferior movement of the hyoid bone (P < 0.05, P < 0.05, respectively). Conclusion: There were significant changes in the hyoid bone, tongue, and airway space after mandibular setback surgery.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.404-411
• /
• 2009

The steel pipe of steel-concrete composite piles increases the pile strength and induces the ductile failure by constraining the deformation of the inner concrete. In this research, the load-movement relations and the reinforcement effect by the outer steel pipe in the steel-concrete composite pile were analyzed by performing three-dimensional numerical analyses, which can simulate the yielding behavior of the pile material and the elasto-plastic behavior of soils. The parameters analyzed in the study include three pile materials of steel, concrete and composite, pile diameter and loading direction. As the results, the axial capacity of the composite pile was 1.9 times larger than that of the steel pipe pile and similar with that of the concrete pile. At the allowable movement criteria, the horizontal capacity of the composite pile was 1.46 times larger than that of the steel pile and 1.25 times larger than that of the concrete pile. In addition, the horizontal movement at the pile head of the composite pile was about 78% of that of the steel pile and about 53% of that of the concrete pile, which showed that the movement reduction effect of the composite pile was significant and enables the economical design of drilled shafts.

• Archives of Reconstructive Microsurgery
• /
• v.10 no.2
• /
• pp.105-110
• /
• 2001

Breast reconstruction is an aesthetically critical procedure and should be peformed to match the opposite breast in shape, contour, and position. Many methods were introduced to reconstruct the breast with autogenous tissue. But, free tissue transfer for breast reconstruction has become common method. The transverse rectus abdominis myocutaneous flap technique has been a widely accepted method of breast reconstruction after mastectomy, since the first introduction of free abdominoplasty flap in 1979. In breast reconstruction with a free flap the selection of suitable recipient vessels remains one of the most critical decision for surgeon. The most common recipient site for free flap breast reconstruction is the axillar system. But, the use of the axillary system as a recipient site limits flap movement and flexibility in breast shaping. The use of internal mammary vessels as a recipient site be able to achieve ideal breast symmetry, but that technique require the rib resection. The selection of suitable recipient vessels is most important for successful free tissue transfer. We have performed breast reconstruction with TRAM flaps anastomozed to the internal mammary vessel perforator. We came to the conclusion that this vessel perforator is useful as a recipient site in cases of immediate breast reconstruction with free TRAM flap.