• 한국토양비료학회지
• /
• 제34권2호
• /
• pp.77-84
• /
• 2001

정밀토양조사(精密土壤調査)의 결과 활용도 증진을 위하여, 분포지형(分布地形), 토성(土性), 배수등급(排水等級) 등을 종합한 논 토양의 형태형(形態型)을 구분하였다. 우리 나라 논 토양의 형태형은 37형(型)으로 구분되었고, 분포면적이 많은 형태형은 곡간지 식양질반습답(埴壤質半濕畓)(Lfi : 약 224천ha), 곡간지 식양질 건답(乾畓)(Lfd : 약160천ha), 곡간지 사양질(砂壤質) 반습답(半濕畓)(Lmi : 약112천ha), 곡간지 역질건답(礫質乾畓)(Lkd : 약 93천ha)등의 순으로 곡간(谷間) 및 선상지(扇狀地) 토양의 비중이 높았다. 논 토양의 답리작, 비닐하우스, 또는 녹비배재 가능성등을 형태형별로 추천하였고, 아울러 생고나 퇴비, 심경, 객토 또는 배수 대상지, 침식위험성, 벼의 중간낙수 필요성, 환원장해 우려정도 등을 구분하여 관리기술로 추천하였다. 각종 시험연구가 진전(進展)될수록 더욱 정밀(精密)한 토양관리(土壤管理) 기술의 추천이 가능해질 것으로 본다.

• Journal of International Society for Simulation Surgery
• /
• 제1권1호
• /
• pp.7-12
• /
• 2014

Purpose Surgical correction of various occular problems which do not have visual problem in plastic surgical area is to normalize the appearance of the face by restoring the normal position of orbit and eyeball. With development of surgical technique, the orbit can be restored exactly in trauma patient and can be moved totally in hypertelorism, as an example of congenital disease. All these surgeries are based on the hypothesis that the position of oclular glove moves in the plane in a quantitatively predictable reationship to osseous orbit movement. However, no studies have critically evaluated between the change of periorbital soft tissue and the outcome of the surgical correction, because there is no method of objective, quantitave evaluation of the periorbital soft tissue. Method Author suggest the methodology for quantitative assessment of ocular and periocular fat changes using the manipulation of digital images of computed tomographic scan. Results The method was allowed to evaluate inter-dacryon distance, inter-centroid distance, movement of the medial orbital wall, movement of the lateral orbital wall, alteration of thickness of the lateral periorbital fat as indicator of movement of the orbital wall and orbit in the patient with congenital periorbital anomaly and postoperative periorbital surgery. The goal of surgical correction of various occular problems which do not have visual problem in plastic surgical area is to normalize the appearance of the face by restoring the normal position of orbit and eyeball. With development of surgical technique, the orbit can be restored exactly in trauma patient and can be moved totally in hypertelorism, as an example of congenital disease. All these sugeries are based on the hypothesis that the position of oclular glove moves in the plane in a quantitatively predictable relationship to osseous orbit movement. However, no studies have critically evaluated between the change of periorbital soft tissue and the outcome of the surgical correction, because there is no method of objective, quantitave evaluation of the periorbital soft tissue. In this report, author suggest the methodology for quantitative assessment of ocular and periocular fat changes using the manipulation of digital images of computed tomographic scan. Conclusion The method suggested is objective and accurate method in measurement of the orbital contents. It takes time and is not easy to do, however, this kind of measurement for fine structures will be more easily available in near future.

• Clinical and Experimental Reproductive Medicine
• /
• 제30권3호
• /
• pp.241-248
• /
• 2003

Objective: The purpose of this study was to evaluate the survival rate of vitrified blastocyst according to the freezing vessels, equilibration time in cryoprotectant and artificial dehydration method. Methods: Human blastocysts were vitrified after loading onto the plastic straw, open-pulled straw (OPS), electron microscopy grid (EM grid) for 1.5 min or 3 min. They also were directly plunged into LN2 within 30sec. For artificial shrinkage of blastocysts, 36 gauge fine needle was pushed at the cellular junction of the trophectoderm into the blstocoele cavity until it shrank without damage of inner cell mass. Results: The survival rate of vitrified blastocysts on plastic straw, OPS, EM grid as freezing vessels were 26.7, 13.0 and 60.5%, respectively. The survival rate of EM grid was significantly higher than that of plastic straw and OPS (p<0.05). For 1.5 min equilibrium, the survival rates of early blastocyst (EB), middle blastocyst (MB) and late blastocyst (LB) were 64.4, 81.0, and 20.0% respectively. For 3 min equilibrium, the survival rates of EB, MB, and LB were 69.9, 50.0 and 57.5% respectively. The survival rates of EB and MB were significantly higher than that of LB in 1.5 min equilibrium group (p<0.05), however, the significance was not observed in 3 min equilibrium groups. In cytoplasmic shrinkage before vitrification, the survival rates of EB, MB and LB were 92.9, 100 and 75.9% respectively. The survival rate of MB was significantly higher than that of LB (p<0.05). The survival rates of vitrified blastocysts by artificial dehydration and slow-frozen blastocysts were not significantly different as 88.9 and 66.7%, respectively. Conclusion: This study showed that the vitrification of human blastocysts using EM grid and artificial dehydration is an effective method. Therefore, these methods would be an useful techniques for blastocyst cryopreservation.

• 복식
• /
• 제55권4호
• /
• pp.29-37
• /
• 2005

Beauty Art is an act which makes a face beautiful using various methods such as permanent, manicure and make-up. Recently, Beauty Art is recognized as the personal culture expressing the value of beauty and spirit. Therefore, there are growing interests in the comprehensive study of Beauty Art nor only from the beauty industries but also from academia, because Beauty Art is the high value-added field and Is recognized as a style of the dress. The purpose of this study is to open a new view to understand the Nail Art as a fold of experimental plastic art. The arctic expression is added to Beauty Art to develop it from the routine technique of the make-up and hairstyling to creative art. Assemblage is adopted to provide Beauty Art with fine harmonious expression which develop Nail Art into interesting and unique art area. Assemblage meaning compounding or collection is a technique through which three-dimension is added to two-dimension paintings, and which is an expression of an art work by recollection of miscellaneous articles or waste materials. Assemblage is a term which Jean Dubuffet coioned first in order to differentiate collage used by Picaso or Braque. Here, I present Nail Art Designs which applied Jean Dubuffet's works focusing on Automaticity and Happenstantial phenomena of materials, Materialization, and Directness. These features are characteristics of Assemblage which basic frameworks are fantastic collection, accumulation, constructive collection, and object collection.

• Geomechanics and Engineering
• /
• 제12권1호
• /
• pp.111-125
• /
• 2017

Swelling and shrinkage characteristics of expansive fine grained soil cause volumetric changes followed by distress and damage to the structures. Soil stabilization can be explained as the alteration of the soil properties by chemical, mechanical or any other means in order to enhance the engineering properties of the soil. Utilization of industrial wastes in soil stabilization is cost effective and environment friendly. This paper presents an experimental study on stabilization of expansive soil using industrial wastes, viz. fly ash and dolochar. The paper includes the evaluation of engineering properties like unconfined compressive strength and California bearing ratio (CBR) of expansive soil collected from Balasore district of Odisha stabilized with fly ash and dolochar in different proportions and to predict the influence of these additives on engineering properties and strength characteristics of expansive soil. Both fly ash and dolochar were found to increase the CBR and decrease many index properties such as liquid limit, plastic limit, plasticity index, swelling index and UCS, thus enhancing the strength parameters of expansive soil.

• 한국안전학회지
• /
• 제2권1호
• /
• pp.31-41
• /
• 1987

The surface rolling method which is one of the plastic deformation processes increases the surface roughness with reduction of diameter and hardness. In this study, three NACHI 6000 ZZ bearing were used for surface rolling tool on a mild steel. The following results have been obtained with the mild steel. 1) The load is major factor in getting fine surface roughness of roller fininshing after grinding. The optimal surface roughness of SS40 steel can be obtained at the contact pressure of $210kgf/cm^2$. But, Better surface roughness can not be expected, Due to flaking phenomena at more than 300 kgf/cm of contact pressure. 2) At the contact pressure range of $200kgf/cm^2{\sim}210kgf/cm^2$ for optimal surface roughness, The surface hardness increased to Hv 200~Hv 240 from Hv 125 before surface rolling. 3) Within the diameter variation of $13{\mu}m$ the surface roughness and the surface hardness were increased, but out of variation of $14{\mu}m$. The surface roughness become worse and the surface hardness was increased.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.55-62
• /
• 2003

This paper investigates the micro-cutting of cemented carbides using PCD (polycrystalline diamond) and PCBN (polycrystalline cubic boron nitride) cutting tools are performed with SEM direct observation method. The purpose of this study is to make clear the cutting mechanism of cemented carbides and the fracture of WC particles at the plastic deformation zone in orthogonal micro-cutting. And also to achieve systematic understanding, the effect of machining parameter on chip formation and machined surface was studied, including cutting speed, depth of cut and various tool rake angle. Summary of the results are shown below. (1) Three type of chip formation process have been proposed by the results of the direct observation in orthogonal micro-cutting of cemented carbide materials. (2) From the whole observation of chip formation, primary WC particles are crushed and/or fine grained in the shearing deformation zone. A part of them are observed to collide directly with a cutting edge of tool by following the micro-cutting. (3) Surface finish, surface morphology and surface integrity is good to obtain by cutting with PCD cutting tool compared with PCBN. (4) The machined surface has the best quality near the low cutting speed of 10${\mu}m$/sec with a cutting depth of 10 ${\mu}m$ using 0$^\circ$ rake angle and 3$^\circ$ flank angle in this condition, but it was found that excessively low speed, for example the extent of 1 ${\mu}m$/sec, is not good enough to select for various reason.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.163-171
• /
• 1999

The abnormal grain coarsening in wire rolling induces detrimental defects, such as jagged size tolorance, severe bending after heat treatments and drawing troubles, in the following secondary processes. Neishi et al observed that there is a band type region where grain coarsenting occurs in the plastic strain vs. deformation temperature plot. Based on the finding, we have investigate whether grain sizes and ferrite volume fractions are correlation to deformation strain with three kinds of wire rod diameters as for the different average deformation conditions. The samples were chosen from the No.2 Wire Rod Mill of POSCO where 3-roll type of finishing mill stand are used. It was found in the present work that the grain size and ferrite volume fraction of the rolled and cooled microstructure were changed with rolling reduction and rolling temperature. Abnormally grown grains at various observed points were also found. To have homogeneously fine grains of microstructure from the No. 2 Wire Rod Mill, it will be easier to control finish rolling temperature at around 750$^{\circ}C$ rather than to find another rolling schedule.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.504-511
• /
• 2011

Nano-sized Sn powder was prepared by pulsed wire evaporation method. The Sn powder and carbon black were charged in jar and ball milled. The milling time was varied with 10 min., 1h, 2h, and 4h, respectively. The milled powders were dried and the shape and size were observed by FE-SEM. Nano-sized Sn powders were plastic-deformed and agglomerated by impact force of balls and heat generated during the SPEX milling. The agglomerated Sn powder also consisted of many nano-sized particles. Initial discharge capacities of milled Sn electrode powders with carbon powder were milled for 10 min., 1h, 2h, and 4h were 787, 829, 827, and 816 mAh/g, respectively. After 5 cycle, discharge capacities of Sn electrode powders with carbon powder milled for 10 min., 1h, 2h, and 4h decreased as 271, 331, 351, and 287 mAh/g, respectively. Because Sn electrode powders milled for 2h constist of uniform and fine size, the cyclability of coin cell made of this powders is better than others.

• Geomechanics and Engineering
• /
• 제23권4호
• /
• pp.365-379
• /
• 2020

One of the leading causes for the damage of various underground structures during an earthquake is soil liquefaction, and among this liquefaction-induced uplift of these structures is a major concern. In this study, finite-difference modelling is carried out to study the liquefaction-induced uplift of an underground structure of 5 m diameter (D) with and without the replacement of the in-situ fine sand around the structure with the coarse sand. Soil replacements are carried out by three methods: replacement of soil above the structure, around the structure, and below the structure. The soil behaviour is represented using the elastic-perfectly plastic Mohr-Coulomb model, where the pore pressures were computed using Finn-Byrne formulation. The predicted pore pressure and uplift of the structure due to sinusoidal input motion were validated with the centrifuge tests reported in the literature. Based on numerical studies, an empirical equation is developed for the determination of liquefaction-induced maximum uplift of the underground structure without replacement of the in-situ sand. It is found that the replacement of soil around the structure with 2D width and spacing of D can reduce the maximum uplift by 50%.