• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.6
• /
• pp.381-389
• /
• 2013

Two patients with partial edentulous maxilla were scheduled to undergo installation of implant fixtures using a tooth-supported surgical template based on computer assisted treatment planning. After 3-dimensional (3D) computed tomographic scanning was transferred to the OnDemand3D (Cybermed Co., Seoul, Korea) software program for virtual planning, fixtures of MK III Groovy RP implant of the Br${\aa}$nemark System (Nobel Biocare AB Co., G$\ddot{o}$teborg, Sweden) was installed using the In2Guide (CyberMed Co., Seoul, Korea) tooth-supported surgical template with a Quick Guide Kit (Osstem Implant Co., Seoul, Korea) system in the posterior maxilla of each patient. Sinus floor elevation with a xenogenic bone graft procedure was also performed simultaneously in one patient. Fixture installations were completed successfully without complications, such as sinus mucosa perforation, bony bleedings, fenestrations, or others. During the last two-year follow-up period after prosthetics delivery, each implant was found to be fine with no other minor complications. The entire procedures are reported and the literatures on use of tooth-supported surgical template was reviewed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.3
• /
• pp.247-253
• /
• 2006

Pleomorphic adenoma of the parotid gland typically presents as painless, mobile mass of long duration, and originate in the superficial lobe but, more rarely these tumors may involve the deep lobe of the parotid gland. The average size of a parotid neoplasm is 2 to 4 cm. The effective treatment of parotid pleomorphic adenoma is surgical excision. The simple excision or enucleation resulted in recurrence rate of 45% in benign tumor. Therefore, the superficial parotidectomy with identification and preservation of the facial nerve is now the most widely accepted surgery. We report a case of the huge pleomorphic adenoma of the left parotid gland in a 67-year-old man who complained the large mass, measured about $10\times7\times5$cm-sized, in front of the left ear and on the mandibular ascending ramus. The diagnosis was confirmed by the clinical examination, computed tomographic scan, fine needle aspiration, and incisional biopsy. Superficial parotidectomy including the tumor and preservation of the facial nerve using the modified Blair approach was performed. And satisfactory results have been obtained cosmetically and functionally.

• Korean Journal of Agricultural Science
• /
• v.38 no.2
• /
• pp.205-212
• /
• 2011

The potential factors for quality loss of cleaned fresh ginseng and technology to be associated with the improvement of marketability through pre-packaging fumigation were examined. Major microorganisms isolated from fresh ginseng included Botrytis cinerea, and Erwinia sp. Others such as Cylindrocarpon sp., Fusarium spp., Pennicilium spp., Bacillus spp. were also found at relatively low frequency. The bacterial density of vacuum packaged fresh ginseng rapidly increased during simulated marketing. Little correlation between bacterial growth and package swelling was found. In order to improve packaging method of fresh ginseng, pre-packaging treatment of 2-phenylethyl alcohol (PE, 100 uL/L, 4 hr) was examined. The fumigation treatment effectively inhibited the growth of bacteria density and also effective on keeping firmness of ginseng root, especially in cortical portion. The internal gas compositions of plastic container packaged for ginseng were approximately ranged between 6 to 8% $O_2$and 3 to 4% $CO_2$. The $O_2$ level of fumigation treatment was lower than control whereas $CO_2$ level was higher. The upsurge of ethylene evolution I day after simulated marketing was found only in fumigation treatment but it returned to ordinary level at day 2. The sucrose content of 2-PE treatment was significantly reduced at 5 days after simulated marketing but reducing sugars like glucose and fructose remained at higher level. The difference in sugar levels was reduced after 10 days of simulated marketing. The decay of fresh ginseng began at the lateral or fine root, which is weak to physical damage, in general. The epidermis was more damaged. Plastic container packaging with PE fumigation could be an alternative to vacuum packaging, which allows an aerobic environment and prevents anaerobic respiration. Further study of pre-package fumigation is required to improve technology of fresh ginseng marketing.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.1
• /
• pp.81-91
• /
• 2005

This paper is the results of experimental and numerical works on the investigating design factors influencing the bearing capacity, the ratio of stress concentration, and the failure mechanism of the clay ground improved with sand compaction piles (SCP). In order to find the behavior of the clay ground improved with SCP, extensive centrifuge model experiments were carried out for each of the SCP replacement ratio of 20, 40, and $70\%$, the non-plastic fine contents in sand of 5, 10, and $15\%$, and the ratio of the improved width to the loaded area (W/B) of 1, 2, and 3. The commertially available software of FEM, CRISP, was used to analyze test results by performing numerical estimations. In these numerical analyses the sand compaction piles and the clay ground were simulated as a linear elastic and plastic constitutive model and the modified Cam-clay model, based on Critical State Soil Mechanics, respectively.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.3
• /
• pp.250-258
• /
• 2014

Due to recent industrial growth and development, there has been a high demand for light and highly durable materials. Therefore, a variety of new materials has been developed. These new materials include carbon fiber reinforced plastic (CFRP or CRP), which is a wear-, fatigue-, heat-, and corrosion-resistant material. Because of its advantageous properties, CFRP is widely used in diverse fields including sporting goods, electronic parts, and medical supplies, as well as aerospace, automobile, and ship materials. However, this new material has several problems, such as delamination around the inlet and outlet holes at drilling, fiber separation, and tearing on the drilled surface. Moreover, drill chips having a fine particulate shape are harmful to the work environment and engineers' health. In fact, they deeply penetrate into machine tools, causing the reduction of lifespan and performance degradation. In this study, CFRP woven and unidirectional prepregs were formed at $45^{\circ}$ and $90^{\circ}$, respectively, in terms of orientation angle. Using a high-speed steel drill and a TiAIN-coated drill, the two materials were tested in three categories: cutting force with respect to RPM and feed speed; shape changes around the input and outlet holes; and the shape of drill chips.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.2
• /
• pp.176-179
• /
• 2011

Adenomatoid odontogenic tumors represent 3 to 7 percent of all odontogenic tumors. These tumors are more common in the maxilla than the mandible and usually include the anterior region. Clinically, the most common symptom is painless swelling and the tumor is associated with an unerupted tooth, typically a maxillary or mandibular cuspid. The adenomatoid odontogenic tumor appears radiographically as a unilocular radiolucency around the crown of an impacted tooth, resembling a dentigerous cyst. More often, it contains fine calcifications. Histopathologically, there is a thick wall cystic structure with a prominent intraluminal proliferation of the odontogenic epithelium. The most striking pattern is varying-sized solid nodules of spindle-shaped or cuboidal epithelial cells forming nests or rosette-like structures with minimal stromal connective tissues. Conspicuous within the cellular areas are structures of tubular or duct-like appearance. The duct-like spaces are lined with a single row of cuboidal or low columnar epithelial cells, of which the ovoid nuclei are polarized away from the luminal surface. Small foci of calcification may also be scattered throughout the tumor. These have been interpreted as abortive enamel formations. In some adenomatoid odontogenic tumors, the material has been interpreted as dentoid or cementum.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.715-723
• /
• 2017

This study investigates the properties of a high-performance cementitious composite with partial substitution of stone dust for fine aggregate. The relationship between the properties and particle size distribution was analyzed using several analytical models. Experiments were carried out to examine the flowability, rheology, and strength of cement mortars with different stone-dust replacement ratios of 0-30 wt.%. The results showed improved flowability, lower rheological parameters (yield stress and plastic viscosity), and improved strength as the amount of stone dust increased. These results are closely related to the packing density of the solid particles in the mortar. The effect was therefore estimated by introducing an optimum particle size distribution (PSD) model for maximum packing density. The PSD with a higher amount of stone dust was closer to the optimum PSD, and the optimization was quantified using RMSE. The improvement in the PSD by the stone dust was proven to affect the flowability, strength, and plastic viscosity based on several relevant analytical models. The reduction in yield stress is related to the increase of the average particle diameter when using stone dust.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.4
• /
• pp.85-94
• /
• 2004

Waste wood-plastic composite panels are made on different hot press molding conditions, and tested for apparent density, water absorption, expansion in thickness and flexural strength. From the test results, regardless of molding temperature and molding time, the apparent density of the composite panels is increased with an increase in the molding pressure, while their water absorption is decreased with an increase in the molding pressure. The flexural strength of the composite panels is markedly increased with increasing molding pressure, molding temperature and molding time, and tends to become nearly constant at a molding temperature of $120^{\circ}C$ and a molding time of 15min.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.2
• /
• pp.254-261
• /
• 2000

Since callus distraction technique was applied clinically for the correction of dentofacial deformity to the patients with hemifacial dysplasia by McCarthy in 1992, many surgeons have tried to apply this method to the maxillofacial region. But this technique has some drawbacks. One of the disadvantages of this technique is extensive scar formation in the facial area, which is a sequelae of extraoral approach for supraperiosteal dissection of the periosteum overlying the mandible. Recently, we have made an effort to perform this technique through intraoral approaches to prevent scar formation on the submandibular area and modified the design of the osteotomy, that is step osteotomy technique, to increase the raw bone surface on both osteotomized segments. The rationale for the application of this step osteotomy technique is to increase the amount of regenerated bone and the length of distraction, to avoid damage of inferior alveolar neurovascular bundle, and to increase initial stability of the splitted segments. Step osteotomy procedure can be done with fine micro-osteotomy saw through subperiosteal tunneling. Extraoral pins should be inserted before making the osteotomy. Since 1994 we have applied this technique at 8 sites In 5 patients with mandibular deficiencies: 2 cases of hemifacial microsomia, 1 case of developmental facial asymmetry and 2 cases of mandibular bony defect. Mandibular elongation have been achieved from 12 to 20mm in length. 1 out of 8 site, we experienced non-union in the case of mandibular body defect. Some skeletal relapse and growth retardation phenomenon have been observed in some cases with the longest follow-up of 48 months.

• Journal of the Korean Society of Costume
• /
• v.29
• /
• pp.23-38
• /
• 1996

The purpose of this study was to analyze the characteristics of the Minimal Art represented in the second half 20th century fashion. All the mode of dress worn this century have developed from the stimulus of a chang-ing society fired by new discoveries and a zest for the new and different. It would appear that even more dramatic changes will soon occur in our clothing styles the effects of which will be farreaching. Many of today's styles intended to dress our psyche rather than our bodies and this if fully understood by the new designers whose influ-ence will become increasingly more potent as we approach the new century. The highly developed material civilization resulted in human alienations environmental distruption, l By this fact human being of the 20th century was to overcome social com-plexity. Accordingly their search for simplicity was interested in the 60's style. Especially the formativeness of the 60s style was repre-sented in the second half 20th century fashion. In this paper it was focused that how the characteristics of the Minimal Art was expressed in the second half 20th century fashion. minimalism was a quest for basic elements repesenting the fundamental esthetic values of art. without regard to issues of content. At its most extreme it reduced art not ot an eter-nal essence but to an arid simplicity. "Primary Structure" the most suitable name suggested for this type conveys its two salient characteristics : extreme simplicity of shapes and a kinship with architecture. minimalist works are charcterized by huge dimensions coldness and absolute aesthetic neutrality. minimalist artists ambition is to de-fine through the most rudimentary materials such as plywood galvanized iron aluminum plastic and wood a new order of the space. The environment is just as important as the object itself. Similary the use of new tough materials. such as vinyl metal and plastic at late half of the 20th century fashion related to the formativeness of the Minimal Art. And the style of 20th fashion was holded the internal meanings in common the formativeness of the Minimal Aet thorough the various texture pat-tern silhouette etc.uette etc.