• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.721-724
• /
• 2006

In this study, particle size distribution of cement powder system were adjusted using the blast furnace slag powder, Blaine $2250cm^2/g\;and\;8300cm^2/g$, which easy to adjust particle size distribution to examine how particle size distribution of the binder has an effect on rheological properties of the cement paste. In addition, the relationship between n-value of Rosin-Rammler function and plastic viscosity were discussed. All measured flow curves represented thixotropy behavior and the hysteresis area was smaller for the more added coarse particle. When the combination was based on a ratio of $20{\sim}25vol%$ fine particles, $30{\sim}40vol%$ OPC and $40{\sim}45vol%$ coarse particles of the total volume, a high fluidity and low yield strength was achieved.

• 오토저널
• /
• 제9권5호
• /
• pp.57-65
• /
• 1987

The surface rolling method which is one of the plastic deformation processes increases the surface roughness with reduction of diameter and hardness. In this study, three NACHI 6000 ZZ bearing were used for surface rolling tool on a mild steel The following results have been obtained with the mild steel. 1) The load is major factor in getting fine surface roughness of roller finishing after grinding The optimal surface roughness of SS41 steel can be obtained at the contact pressure of 210 kgf/cm$^{2}$. 2) At the contact pressure range of 200kgf/cm$^{2}$-210kgf/cm$^{2}$ for optimal surface roughness, The surface hardness increased to Hv200-Hv240 from Hv 125 before surface rolling. 3) Within the diameter variation of 13 .mu.m the surface roughness and the surface hardness were increased, but out of variation of 14.mu.m. The surface roughness become worse and the surface hardness was increased.

• 소성∙가공
• /
• 제11권6호
• /
• pp.503-512
• /
• 2002

The drawbead is used to control material flow into the die during the binder wrap process and the stamping process in the sheet metal forming process. Since the dimension of drawbead is relatively small in comparison with the typical dimensions, it is difficult to include drawbeads in finite element analysis of the sheet metal forming process. It is because the mesh system has to be fine enough to describe the drawbead and the computation time is drastically increased. In this paper, simulation of drawbead forming has been carried out to obtain the equivalent boundary conditions in the binder wrap process and the stamping process. In order to investigate the effect of various die geometries, parameter studies are performed with the variation of parameters such as the blank length, the drawbead depth, the drawbead radius, the inclination of die and the friction coefficient.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.657-660
• /
• 2005

It is net easy to predict the shrinkage rate of a plastic injection mold in its design process. The shrinkage rate should be considered as one of the important performances to produce the reliable products. The shrinkage rate can be determined by suing the CAE tools in the design produces. However, since the analysis can take minutes to hours, the high computational costs of performing the analysis limit their use in design optimization. Therefore this study was carried out to presume for mutual relation of analysis condition to get the optimum average shrinkage by regression analysis. The results shown that coefficient of determination of regression equation has a fine reliability over 88.3% and regression equation of average shrinkage is made by regression analysis.

• 한국건설순환자원학회논문집
• /
• 제10권3호
• /
• pp.293-299
• /
• 2022

본 연구에서는 도로변 미세먼지 내 타이어와 도로 마모입자의 정량화 분석과 타이어와 도로 마모입자 내 타이어 및 도로 성분 비율을 확인하기 위한 연구를 수행하였다. 이에 시간당 1,300여대 교통량을 갖는 충청남도 지자체중에서 C도시의 종합버스터미널 부근 정류장의 경계석 6곳에서 먼지 샘플을 채집하였다. 채집된 먼지 샘플 1,000 g에 대해 크기와 밀도 분리 수행한 결과 미세먼지 샘플 24 g과 타이어와 도로 마모입자 약 0.05 g이 분리되었다. 즉, 도로변 미세먼지에는 타이어와 도로 마모입자가 약 0.21 % 존재하는 것으로 분석되었다. 분리된 타이어와 도로 마모입자에 대해 주사전자현미경(SEM)을 이용하여 형상을 분석한 결과 지우개가루 형상이 관찰되었다. 또한, 도로변 미세먼지 내 존재하는 타이어와 도로 마모입자는 자동차 주행 중 타이어와 도로간 마찰에 의해 생성되어 도로변으로 분산되었기 때문에 열중량분석기(TGA)와 가스크로마토 질량분석기(GC/MS)를 이용하여 성분 분석을 수행하였다. 정량화 계산식을 통해 성분에 대한 타이어 및 도로 성분 비율을 도출한 결과 약 3:7로 분석되었다. 본 연구는 도로변 미세먼지 발생원의 구성원과 함량 분석을 위해 객관적이고 신뢰도 높은 분석 기법을 제시하였다. 추후, 도로건설과 타이어 소재의 미세먼지 저감 기술 확보와 개선 방안 확보를 위한 선행적 기초 연구로써 활용되기를 기대하고 지속적으로 더 많은 지역과 샘플 분석에 대한 통계 데이터를 확보하여 신뢰도 높은 연구를 수행하고자 한다.

• 조형예술학연구
• /
• 제1권
• /
• pp.125-164
• /
• 1999

The Grid, a lattice structure adapted in paintings, is one of thesimplest plastic structures based on the intersection of horizontal and perpendicular lines. Though mankind has, from the pre-history to the present day, put it to good use in everyday life as a traditional practice or a magical, esoteric, religious emblem in the case of the teciform of primitve art, it was in the paintings of Piet Mondrian that the Grid showed its modern, artistic transformation. As we suggest in the title, before I state the Grid as a plastic construction of modern painting, this dissertation inquires the Grid structure that extends over paintings through the ages as a painterly conept, especially focused on their formation and deconstruction. To begin with, my dissertation investigates, as a historical background, a general idea of the geometrical structure and phases of its transition in art, prior to dealing with the Grids as plastic strures in modern painting. the core of my study on formal Grids is permeated through the third chapter. The first chapter concentrates on, firstly, difining the notion of the Grid and geometrical structure, secondly, searching for a historical backgrounb with whict the so- called modern Grid-paintings come in, inquiring into the formation of the illusion-Grid as aresult of discovering the linear perpective and the situation of the conflict and reconciliaton between reality and illusion. Based on these considerations, the second cecond chapter will examine the various sitations of formation and adaptation of the paintery Grids in the Literalism-Grid, as we have already seen in the chapter one. And the cardinal third chapter devotes itself to the process of the formation of the so-called Object-Grid and Literal-Grid in the Literalism or Minimalism as its logical extension of the Painterly Grid. With it we can get to an interpretation and understanding of the meaning and qualites of Grid dwelt in Modernism thst transformed the structure of Painterly Grid originally as a plane concept to the third dimentionl structure. And then, the fourth chapter, we try to draw a new meaning andre-interpretation of the Formal-Grid as a representatuinnal structure appeared in the post-modernist paintings, going with its deconstructional situation. Therefore, we can, in our study on Grids, see the various points of view in the interpretation of them as illusion-structure, as plane-structure, and as cubic-structure; its concept differs form times, oscillating between its formation and deconstruction. The Grid, as we have seen in my dissertation, contains various problems and significations in art that deserve to investigate throughly, including some important plastic problem such as space and plane, and, in the case of do-grid, time. We may expect new concepts of it that will have difference meanings. 1 hope my study makes some contributions to understanding the coordination of the abstruse modern and contemporary art.

• 대한두개안면성형외과학회지
• /
• 제11권1호
• /
• pp.28-32
• /
• 2010

Purpose: In accordance with the increasing number of accidents caused by various reasons and recently developed fine diagnostic skills, the incidence of orbital blow-out fracture cases is increasing. As it causes complications, such as diplopia and enophthalmos, surgical reduction is commonly required. This article reports a retrospective series of 5 blow-out fracture cases that had unusual nerve injuries after reduction operations. We represents the clinical experiences about treatment process and follow-up. Methods: From January 2000 to August 2009, we treated total 705 blow-out fracture patients. Among them, there were 5 patients (0.71%) who suffered from postoperative neurologic complications. In all patients, the surgery was performed with open reduction with insertion of $Medpor^{(R)}$. Clinical symptoms and signs were a little different from each other. Results: In case 1, the diagnosis was oculomotor nerve palsy. The diagnosis of the case 2 was superior orbital fissure syndrome, case 3 was abducens nerve palsy, and case 4 was idiopathic supraorbital nerve injury. The last case 5 was diagnosed as optic neuropathy. Most of the causes were extended fracture, especially accompanied with medial and inferomedial orbital blow-out fracture. Extensive dissection and eyeball swelling, and over-retraction by assistants were also one of the causes. Immediately, we performed reexploration procedure to remove hematomas, decompress and check the incarceration. After that, we checked VEP (visual evoked potential), visual field test, electromyogram. With ophthalmologic test and followup CT, we can rule out the orbital apex syndrome. We gave $Salon^{(R)}$ (methylprednisolone, Hanlim pharmaceuticals) 500 mg twice a day for 3 days and let them bed rest. After that, we were tapering the high dose steroid with $Methylon^{(R)}$ (methylprednisolon 4 mg, Kunwha pharmaceuticals) 20 mg three times a day. Usually, it takes 1.2 months to recover from the nerve injury. Conclusion: According to the extent of nerve injury after the surgery of orbital blow-out fracture, the clinical symptoms were different. The most important point is to decide quickly whether the optic nerve injury occurred or not. Therefore, it is necess is to diagnose the nerve injury immediately, perform reexploration for decompression and use corticosteroid adequately. In other words, the early diagnosis and treatment is most important.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5636-5645
• /
• 2015

콘크리트, 모르타르 등 건설재료의 강도와 작업성은 구성하는 잔골재의 조립률, 입자 크기, 흡수율 등의 물리적 특성에 영향을 받는다. 특히, 잔골재의 입자 크기와 그에 따른 입도 분포는 시공 품질을 좌우하는 건설재료의 작업성을 결정한다. 최근 들어 건설현장에서는 천연모래의 수급 불안정으로 다양한 종류의 잔골재를 사용하고 있는데, 잔골재의 입자 크기에 대한 검증 없이 사용하는 경우 건설재료의 품질 저하 문제가 빈번히 발생하고 있다. 이 논문에서는 잔골재의 입자 크기가 모르타르의 레올로지 거동에 미치는 영향을 분석하여 건설재료의 작업성 평가에 대한 기초 자료를 제공하고자 한다. 모르타르의 작업성 평가를 위해서는 일반적으로 많이 사용하는 미니 슬럼프 플로 시험과 건설재료용 레오미터를 이용하여 레올로지 특성, 즉 항복응력과 소성점도를 측정하였다. 사용한 샘플은 일반 모래에 대한 체가름 시험을 통해 입자 크기에 따라 분류한 11가지 종류의 모래를 동일한 배합비로 모르타르를 제조하여 사용하였다. 실험결과 입자 크기가 0.7 mm 이하로 작아질수록 모르타르의 항복응력과 소성점도가 점진적으로 증가하였다. 입자 크기가 0.34 mm 이하로 작아지면 모래 입자의 흡수율에 따른 영향이 커짐을 확인하였고, 흡수율만큼 배합수를 증가시키면 이에 대한 영향을 제거할 수 있었다. 따라서 0.34 mm 잔분에 대한 흡수율 보정은 건설재료의 작업성 관리에 매우 중요함을 확인하였다.

• 전기전자학회논문지
• /
• 제26권3호
• /
• pp.510-514
• /
• 2022

본 논문에서는 고감도 보급형 방사선 측정센서 모듈 개발을 제안한다. 제안하는 측정센서 모듈은 섬광체+광증배소자(SiPM) 센서 최적화 구조설계, 센서 드라이버용 증폭과 필터 및 제어회로 설계, 근거리 통신을 포함한 제어회로 설계, 센서 기구설계 및 제작, 시제품에 적용되는 GUI 개발 등으로 구성된다. 섬광체+광증배소자(SiPM) 센서 최적화 구조 설계는 센서 구조 설계를 위한 섬광체와 광증배소자(SiPM)의 특성을 확인하여 설계한다. 센서 드라이버용 증폭과 필터 및 제어회로 설계는 SiPM을 이용하여 섬광체로 방사선에 의해 발생하는 미세 섬광신호를 처리하도록 설계한다. 근거리 통신을 포함한 제어회로 설계는 근거리 무선통신 기능을 지원하기 위한 MCU 설계 및 유선 통신 지원을 통해 데이터 전송이 가능하도록 설계를 수행한다. 센서 기구설계 및 제작은 플라스틱 섬광체에서 발생한 미세 섬광 신호를 광증배소자(SiPM)에 전달하기 위해 플라스틱 섬광체 외부에 반사지(미러링)를 감싸 발생한 섬광이 반사되어 효율을 높이도록 설계한다. 시제품에 적용되는 GUI 개발은 각 화면에 따라 상단에 날짜와 시간을 표현하며, 측정단위 및 시간, 초, 알람 레벨, 통신상태, 배터리 용량 등이 표현되도록 한다. 제안된 시스템의 성능을 평가하기 위하여 공인시험기관에서 실험한 결과는 방사선량 측정 범위가 30𝜇Sv/h ~ 10mSv/h로 측정되어서, 현재 국내외에서 상용으로 판매되는 제품들 중에서 최고수준 범위와 같은 결과가 산출되었다. 또한, ±7.4%의 측정 불확도가 측정되어서 국제 표준인 ±15% 이하에서 정상동작 됨이 확인되었다

• 한국가구학회지
• /
• 제20권6호
• /
• pp.543-551
• /
• 2009

The history repeatedly shows that designers have sought their creative inspiration from fine arts. was also influenced by contemporary art such as surrealism or installment works. This thesis aims to examine the inter-relationship between contemporary art and contemporary furniture design with examples of organic modernism and minimalism furniture design. Also, will be analyzed in light of such interdisciplinary relationship, explaining the significances of in scholastic perspective. The previous research analysis of finding out examples of how fine art and design sought mutual exchanges to develop will help to examine the significance of in the context of art history. This analysis could be used as an important academic material to understand the origin and characteristics of modern design furniture. The features of surrealism and minimalism will be discussed in light of their influences on and interactive relationship with organic modernism furniture design. This provides important basic material to further analyze . Furthermore, the artistic language and plastic features of contemporary sculptors and installment artists such as Jean Arp, Richard Serra and Anish Kapoor will be examined to show how integrated and combined main features of those artists. extracted cognitive and phenomenological aspects from Serra's works that overwhelm viewers with their massive scales. Somewhat abstract yet somewhat primitive and dynamic features of Arp's works was also referred to . are made of FRP, composed of three partitions and six stools. This work was analyzed in aspect of form, composition and function. They have organic and flexible formations with free composition availability which endow free disassemble and arrangement. Also, they have cognitive features as of small elements are freely dispersed upon spaces to bestow certain presences. Based on this, this thesis could develop scholastic researches that examine the mutual and interactive relationship between contemporary art and furniture design with much more detailed discussions and examples.