• 제목/요약/키워드: plastic filter

검색결과 92건 처리시간 0.026초

유방촬영 시 몬테칼로 전사모사를 이용한 유방 성형 환자의 장기선량 평가 (Assessment of Organ Dose in Mammoplasty Patient by Monte Carlo Simulation during Mammography)

  • 김지수;조용인;김정훈
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제43권5호
    • /
    • pp.337-341
    • /
    • 2020
  • Although the screening with a mammography has been shown to be economical, simple and effective in detecting breast cancer, it is accompanied by the risk from radiation. Therefore, this study analyzed the glandular dose and organ dose according to the target-filter combination and the presence and absence of implants using Monte Carlo simulation. The results indicate that at a tube voltage of 30 kV and a tube current of 50 mAs, the dose increased in the order of Mo/Mo. Mo/Rh, Rh/Rh and W/Rh in proportion to the atomic number of the target-filter. In addition, in phantom without implant a reduction in dose was seen when compared to the phantom with implant. The organ dose was highest in the lens except for the breast on the examination side regardless of the presence or absence of the implant. These results may contribute to use basic data for the diagnostic reference level of breast plastic surgery patients.

Microbial contamination including Vibrio cholerae in fishery auction markets in West Sea, South Korea

  • Choi, Yukyung;Lee, Yewon;Lee, Soomin;Kim, Sejeong;Lee, Jeeyeon;Ha, Jimyeong;Oh, Hyemin;Shin, Il-Shik;Yoon, Yohan
    • Fisheries and Aquatic Sciences
    • /
    • 제22권11호
    • /
    • pp.26.1-26.7
    • /
    • 2019
  • Background: The monitoring of pathogens of fishery auction markets is important to obtain safe fishery products regarding hygiene and sanitation. In this study, aerobic, coliform, Escherichia coli, and Vibrio cholerae were monitored in the fishery products and environmental samples obtained from fishery auction markets. Methods: The fishery products (flounder, octopus, skate, rock cod, sea bass, snail, monkfish, flatfish, comb pen shell, corb shell, conger eel, hairtail, croaker, and pilchard) were placed in filter bags, and the environmental samples (samples from the water tanks at the fishery auction markets, seawater from the fishery distribution vehicles, ice from wooden or plastic boxes, and surface samples from wooden and plastic boxes used for fish storage) were collected. Aerobic bacteria, E. coli, and coliform in the samples were enumerated on aerobic count plates and E. coli/coliform count plates, respectively. For V. cholerae O1 and V. cholerae non-O1 quantification, most probable number (MPN)-PCR analysis was performed. Results: Aerobic and coliform bacteria were detected in most samples, but E. coli was not detected. Wooden boxes were contaminated with high levels of aerobic and coliform bacteria in all seasons (spring, summer, and fall). During fall, V. cholerae non-O1 were detected in snails, hairtails, croakers, flatfishes, pilchards, plastic boxes, and water samples. Conclusions: These results indicate an increased prevalence of V. cholerae contamination in fishery products in fall, including food contact samples, which can be vehicles for cross-contamination.

PCB 비파괴 검사에 있어서 단일 에너지 소스와 이중 에너지 소스의 영상비교를 위한 엑스선 스펙트럼 분석 (Energy Spectrum Analysis between Single and Dual Energy Source X-ray Imaging for PCB Non-destructive Test)

  • 김명수;김기윤;이민주;강동욱;이대희;박경진;김예원;김찬규;김형택;조규성
    • 방사선산업학회지
    • /
    • 제9권3호
    • /
    • pp.153-159
    • /
    • 2015
  • Reliability of printed circuit board (PCB), which is based on high integrated circuit technology, is having been important because of development of electric and self-driving car. In order to answer these demand, automated X-ray inspection (AXI) is best solution for PCB non-destructive test. PCB is consist of plastic, copper, and, lead, which have low to high Z-number materials. By using dual energy X-ray imaging, these materials can be inspected accurately and efficiently. Dual energy X-ray imaging, that have the advantage of separating materials, however, need some solution such as energy separation method and enhancing efficiency because PCB has materials that has wide range of Z-number. In this work, we found out several things by analysis of X-ray energy spectrum. Separating between lead and combination of plastic and copper is only possible with energy range not dose. On the other hand, separating between plastic and copper is only with dose not energy range. Moreover the copper filter of high energy part of dual X-ray imaging and 50 kVp of low energy part of dual X-ray imaging is best for efficiency.

해수 순환 여과 양식 시설의 여과 재료별 암모니아 제거 능력 (Ammonia Removal Capacities of Several Filter Media in a Seawater Recirculating Aquaculture System)

  • 전임기;손맹현;조재윤;이종문
    • 한국양식학회지
    • /
    • 제10권3호
    • /
    • pp.261-271
    • /
    • 1997
  • 해수 순환여과식 양식 시스템의 여과 재료별 암모니아 제거 능력을 정량적으로 평가하기 위하여 5종류의 침지식 여과 재료인 모래(직경 2-3 mm), 산호사 (직경 30-50 mm), 자갈 (직경 20-40 mm), 폴리에틸렌 망 (네트론) 및 플라스틱 파판(스카이라이트)의 암모니아 제거량과 산소 소비량을 측정하고 그리고 회전원판식 여과 재료의 암모니아 제거량을 측정하여 비교하였다. 실험 기간중 사육조의 암모니아 농도는 0.052-0.904(평균 0.338$\pm$0.219) mg/l였고, 수온은 19.2-21.4 (평균 20.2$\pm0.58) ^{\circ}C$의 범위였으며 사육수의 암모니아 농도 (x : mg/l)에 대한 여과 재료별 단위 용적당 일간 암모니아 제거량 (y : g/m supper(3)/day)의 1/2-order kinetic 식과 1일 평균 암모니아 제거량(g/m supper(3)/day)은 다음과 같다. 모래 : Y=135.5X 상(0.5)-25.1 (r 상(2)=0.8110), 45.1 자갈 Y=43.7X 상(0.5)-5.5 (r 상(2)=0.2596), 17.1 산호사 : Y=125.1X 상(0.5)-33.0 (r 상(2)=0.7307), 31.8 폴리에틸렌 망 : Y=87.4X 상(0.5)-20.1 (r 상(2)=0.6780), 25.2 플라스틱 파판 : Y=71.1X 상(0.5)-17.6 (r 상(2)=0.5206), 19.2 회전원판 : Y=127.6X 상(0.5)-33.4 (r 상(2)=0.7146), 32.8 사육조의 용존산소 농도 범위 3.8-7.5 (평균 5.7$\pm0.98)\;mg/\ell$ 에서의 여과 재료 단위 용적($m^3$/day))당 1일 산소 소비량은 모래, 산호사, 폴리에틸렌망을 이용한 여과조에서 각각 442.1, 291.1, 및 236.9 g/$m^3$/day 로 모래 여과조의 산소 소비량이 가장 많았으며, 자갈과 플라스틱 파판은 각각 135.6 및 134.2 g/$m^3$/day로 가장 적었다. 한편 회전원판 여과조는 물에 노출되는 구조적 특성 때문에 산소 소비량 측정은 불가능하였다.

  • PDF

통합관리 시스템을 이용한 윤활유 페빈용기 회수 ㆍ 처리에 관한 연구 (A Study on the Collection and Transportation Processes of Used Oil Containers by Integrated Management System)

  • 김청균
    • Tribology and Lubricants
    • /
    • 제19권2호
    • /
    • pp.94-101
    • /
    • 2003
  • Used motor oil contains pollutants, including organic chemicals and meta]s. When disposed of improperly - in the trash, on the ground or in a sewer system - the pollutants may reach rivers, lakes or the ground water. Thus, all the waste oil products such as waste motor oil, waste oil container, and waste oil filter should be collected and transported for recycling or disposal by waste oil regulations. Because waste oil container is a valuable resource, waste oil containers can be reused, cleaned, buried, and burned for recycling processes. This paper presents the integrated management system that may increase the efficiency and productivity for collecting and reprocessing waste oil containers such as steel can and plastic container. The integrated management system consists of collection and transportation process management system and confirmation and certification process management system for waste oil containers.

Generation of 1.5 Gbps Pseudo-random Binary Sequence Optical Signals by Using a Gain Switched Fabry-Perot Semiconductor Laser

  • Kim Dae-Geun;Woo Sae-Yoon;Kim Dong-Kwan;Hwang Taek-Yong;Park Seung-Han;Kim Dug Young
    • Journal of the Optical Society of Korea
    • /
    • 제9권3호
    • /
    • pp.103-106
    • /
    • 2005
  • Recently, polymethyl methacrylate based plastic optical fibers (POFs) have attracted considerable attention as a potential medium for local area network (LAN) and home network applications. Since the POFs have very low optical loss at around 650mm, in particular, it becomes quite important to develop GHz transmitters operating at this wavelength for high bit rate optical transmission applications of the POFs. In this paper, we present generation of ${\geq}1.5 Gbps$ pseudo-random binary sequence optical signals by using a gain switched InGaA1P Fabry-Perot semiconductor laser with a high frequency filter, operating at 650mm, and the application of these signals to bandwidth measurement of POFs.

농촌지역 간이상수도시설 개발 및 개선에 관한 연구 (A Study on the Development and Improvement of Simple Piped Water Supply System in Rural Area of Korea)

  • 정용;구자건;김명호;윤석우;김인숙
    • 농촌의학ㆍ지역보건
    • /
    • 제13권1호
    • /
    • pp.19-25
    • /
    • 1988
  • It is very important to supply safe drinking water for rural area not only a prevention of entric diseases but also a promotion of health life. It is estimated that 6,981,000 rural inhabitants were covered by the simple piped water supply system at the end of 1987 in Korea. The programme for improvement of water supply system in rural villages was initiated by the government since 1967. But most of these systems have been operated carelessly by the hands of villagers who have no proper knowledge and experience. Since most of water sources were located nearby farmland, there might be a possibility that the sources could be contaminated by pesticides and fertilizers. For this reason, it is recommended to take underground water as a water source rather than surface water such as a pond or streamwater in rural areas. However, the system is supplied from the surface water, its water quality can be improved by using of simple sand filter and simple chlorinator inexpensively. On the basis of an on-site study, conducted during 1986-87, in San-Buk Village, Keum-Sa-Myon, Yeju-Gun, Kyong-Gi-Do, the new simple piped water supply system was designed by the Institute for Environmental Research, Yonsei University, and constructed by the villagers themselves in September 1987. This simple system which is protected by metal fences consists of three main parts, pump house, vertical sand filter and water tank. The pumped water from underground flows into the upper part of the sand filter, through the sand, and out the water tank which is connected to the bottom of vertical filter. And the simple plastic-bottle chlorinator was installed in the water tank for chlorination. The water quality was remarkably improved after completion of construction. The total bacterial count was not detected from the tap water in households distributed by this simple piped water supply system. The construction cost of this system which was connected 34 households in San-Buk Village, was 4,851,000 won (approximately 6,020 U.S. dollars : 1$=805.8 won) in 1987,77% of expenses was supported by the Community Development Foundation in Korea. This case study for simple piped water supply projects will be applicable to other programme for improvement of water supply system in rural areas of Korea, and other developing countries.

  • PDF

침전접촉산화수로를 이용한 수질 개선 (Water Quality Improvement Using a Contact Oxidation Canal with Sedimentation Basin)

  • 김원장;박상현;김형중;김태균
    • 한국환경농학회지
    • /
    • 제20권3호
    • /
    • pp.143-149
    • /
    • 2001
  • 침전지를 갖는 접촉산화수로 시스템을 이용한 수질 정화효과를 2000년 9월부터 11월까지 조사하였다. 본 시스템은 노즐로 폭기하여 플라스틱여재의 표면에서 오염물질과 공기를 접촉시켜 물을 정화하기 위한 시설이다. 1차 침전지의 수리학적 체류시간은 60분이며, 여기에서는 물속에 있는 오염물이 침전되고 침전물은 바닥에 설치한 배수암거로 배출되도록 설계하였다. 산화수로의 유량, 수리학적 체류시간, 길이는 각각 $200\;m^3/day$, 90 min, 20 m이다. 산화수로에는 플라스틱 접촉여재를 채웠다. 탈질소를 위한 무산소 조건이 확보되지 않았기 때문에 T-N의 처리효율은 다른 수질항목에 비해 낮았다. 그러나 이 처리시스템에서 SS는 $25.0%{\sim}89.6%$, BOD는 $75.0%{\sim}91.5%$, T-P는 $44.3%{\sim}95.3%$의 처리효율을 나타냈다. 이 실험의 결과는 본 연구에서 고안된 침전접촉 산화수로 시스템의 저수지나 수로에서의 수질정화 가능성을 보여주고 있다.

  • PDF

고감도 보급형 방사선 측정센서 모듈 개발 (Development of High-Sensitivity and Entry-Level Radiation Measuring Sensor Module)

  • 오승진;이주현;이승호
    • 전기전자학회논문지
    • /
    • 제26권3호
    • /
    • pp.510-514
    • /
    • 2022
  • 본 논문에서는 고감도 보급형 방사선 측정센서 모듈 개발을 제안한다. 제안하는 측정센서 모듈은 섬광체+광증배소자(SiPM) 센서 최적화 구조설계, 센서 드라이버용 증폭과 필터 및 제어회로 설계, 근거리 통신을 포함한 제어회로 설계, 센서 기구설계 및 제작, 시제품에 적용되는 GUI 개발 등으로 구성된다. 섬광체+광증배소자(SiPM) 센서 최적화 구조 설계는 센서 구조 설계를 위한 섬광체와 광증배소자(SiPM)의 특성을 확인하여 설계한다. 센서 드라이버용 증폭과 필터 및 제어회로 설계는 SiPM을 이용하여 섬광체로 방사선에 의해 발생하는 미세 섬광신호를 처리하도록 설계한다. 근거리 통신을 포함한 제어회로 설계는 근거리 무선통신 기능을 지원하기 위한 MCU 설계 및 유선 통신 지원을 통해 데이터 전송이 가능하도록 설계를 수행한다. 센서 기구설계 및 제작은 플라스틱 섬광체에서 발생한 미세 섬광 신호를 광증배소자(SiPM)에 전달하기 위해 플라스틱 섬광체 외부에 반사지(미러링)를 감싸 발생한 섬광이 반사되어 효율을 높이도록 설계한다. 시제품에 적용되는 GUI 개발은 각 화면에 따라 상단에 날짜와 시간을 표현하며, 측정단위 및 시간, 초, 알람 레벨, 통신상태, 배터리 용량 등이 표현되도록 한다. 제안된 시스템의 성능을 평가하기 위하여 공인시험기관에서 실험한 결과는 방사선량 측정 범위가 30𝜇Sv/h ~ 10mSv/h로 측정되어서, 현재 국내외에서 상용으로 판매되는 제품들 중에서 최고수준 범위와 같은 결과가 산출되었다. 또한, ±7.4%의 측정 불확도가 측정되어서 국제 표준인 ±15% 이하에서 정상동작 됨이 확인되었다

"C"자형 만곡비변형의 교정: 건측 비골판줄질(Rasping of Nasal Bone Flap)과 건측 비배측 비중격절제술(Trimming of Dorsal Septum)의 중요성 (Correction of Deviated Nose: Importance of Rasping of Non-affected Side Nasal Bone Flap and Trimming of Non-affected Side Dorsal Septum)

  • 한기환;이민재;김준형;김현지;손대구
    • Archives of Plastic Surgery
    • /
    • 제32권6호
    • /
    • pp.710-716
    • /
    • 2005
  • A total of 21 patients were operated. Via a columellar labial incision, the upper lateral cartilages were separated from the septum. A submucous resection of the septal cartilage was carried out. After rasping the convex lateral nasal wall of the unaffected side, a low-to-low lateral nasal osteotomy was conducted. Along the deviated dorsal line at the bony vault passing the submucous tunnel, a paramedian nasal osteotomy was performed. The convex side of the nasal bone flap was contoured by rasping. The convex side of the "T"-shaped dorsal septum was trimmed. A total direct septal extension graft of the septal cartilage was done and the alar cartilages were suspended to it. The postoperative results were evaluated by photogrammetric analysis processed by a "neon glow" filter in Adobe Photoshop. The distance from the nasal midline to the most deflective point at 5 levels was measured, and the proportion indices were obtained in regard to intercanthal distance. The results revealed improvement in all levels (p < 0.05), although not perfect. In summary, this technique can result in a clinically good-looking in spite of a slight deflection that still exists