• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.184-189
• /
• 2002

This study, compared with data of PbO-base glass system is a part of new glass composition design with Bi-base composition for PDP Rib. As $Bi_2O_3-B_2O_3-ZnO$ glass composition including Bi, which have similar density value and work facility to PbO, properties of softening point, thermal expansion coefficient, chemical durability, dielectric constant, and structural changing by XPS were investigated. $Bi_2O_3-B_2O_3-ZnO$ glass system, added 50∼80 wt% $Bi_2O_3$ widely, were presented 400∼480$^{\circ}C$ softening temperature, $68{\sim}72{\times}10^{-7}/^{\circ}C$ thermal expansion coefficient and 13∼25 dielectric constant. These results were showed similar physical properties with Pb-base glass system of same composition content, application possibility as starting composition of rib material was identified through micro-control of components and physical properties. The bonding energy of $O_{1s}$ as the $Bi_2O_3$ content decreasing was increased and full width at half-maximum (FWHM) was decreased, which is caused by non-bridging oxygen increasing.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.164-167
• /
• 2004

This study was carried out to investigate in vitro fertilization and development of in vitro matured pig oocytes inseminated with the Duroc boar sperm by different sperm washing media after thawing of the 5 ml frozen straws. Immature follicular oocytes (30-40) were transferred into each well of a Nunc 4-well multidish containing $500{\mu}l$ mTCM199 maturation medium. The sperm rich portion of ejaculates was collected into a 250 ml insulated vacuum bottle and gradually cooled 22 to $24^{\circ}C$ over a 2 h period. Semen was centrifuged at 800 g for 10 min and the seminal plasma discarded. Sperm were esuspended in a lactose-egg yolk and N-acetyl-Dglucosamine (LEN) diluent to contain $1{\times}10^{9}$ sperm/ml and cooled to $5^{\circ}C$ over a 2 h period. Immediately before freezing, semen was rediluted with an equal volume of LEN+4% glycerol and packed into 5 ml straws. After thawing of the 5 ml straw, the 5 ml semen was diluted with 20 ml Beltsville thawing solution (BTS) at room temperature. Oocytes were inseminated with untreated (unwashed and nonpreincubated) or treated sperm (washed two times in BTS, mTLP-PVA and mTBM media, respectively and nonpreincubated) with $2{\times}10^{7}$ sperm concentration. Oocytes were coincubated for 6 h in $500{\mu}l$ mTBM fertilization. At 6 h after IVF, oocytes were transferred into $500{\mu}l$ NCSU-23 culture medium for further culture of 6 h. Sperm penetration, polyspermy and male pronuclear formation of oocytes at 12 h after IVF and developmental ability of oocytes at 48 h after IVF were evaluated. Sperm penetration rate, male pronuclear formation and rate of cleaved embryos were higher in the BTS, mTLP-PVA and mTBM treatments than the unwashed treatment (p<0.05). The rate of blastocysts from the cleaved oocytes (2-4 cell stage) were higher in the mTLP-PVA treatment than in the unwashed, BTS and mTBM treatments. In conclusion, we recommend the washing of frozen-thawed sperm with mTLP-PVA medium before in vitro fertilization of oocytes in mTBM medium.

• Journal of the Korean Magnetics Society
• /
• v.15 no.4
• /
• pp.246-249
• /
• 2005

The blue-color emitting phosphor powder, $CaMgSi_{2}O_6:Eu^{2+}(CMS:Eu^{2+})$ was synthesized by the solid-state reaction method. The synthesized powder was annealed from room temperature to $1,100^{\circ}C$ in air. Its PL property and valence state of Eu atoms was measured by the photoluminescence (PL) and the electron paramagnetic resonance (EPR) spectrometers, respectively. The PL intensity was stable to $700^{\circ}C$, but drastically decreased to $1,100^{\circ}C$. The behavior of EPR intensity was very similar to the PL intensity. The EPR measurement showed that decreased intensity of the PL was caused to the oxidation from the ion $Eu^{2+}$ to $Eu^{3+}$ ions. The EPR spectrometer was powerful as a tool that could distinguish between the valence states of Eu atom as a dopant in various phosphors.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.568-575
• /
• 1999

Two different digestion procedures for the simultaneous determination of major and platinum-group element(PGE) in spent automobile catalysts containing PGE and silicates by inductively coupled plasma atomic emission spectrometry(ICP-AES) are compared. Combinations of mixed aids using HF, $HNO_3$, HCl, $HClO_4$, $H_2O_2$, and $H_3BO_3$ are utilized for the hot plate dissolution method and the closed-vessel microwave digestion method, The latter method has been shown to be relatively superior in terms of recovery, analysis time, and amount of aqua regia (3 parts HCl + part $HNO_3$ required to dissolve PGE in comparison with conventional open vessel hot-plate dissolution. The best results were drawn from the following conditions: In closed Teflon PFA vessels under microwave heating with temperature/pressure regulation, a 0.25 g portion of sample was digested in 2 mL of HF, 2 mL of $HNO_3$ and 6mL of HCl under the pressure of 200 psi(13.79 bar) at $180^{\circ}C$ for 1hr, followed by a second digestion stage with 16 mL of 5%(w/v) boric acid under the pressure of 20 psi(1.38 bar) at $100^{\circ}C$ for 10 min. After the microwave heating, the sample was post-treated with 10 mL of aqua regia twice by hot-plate heating. This condition gives the PGE recovery within 85~110% and the relative standard deviations within 2%. The method developed can therefore be regarded as an alternative method for routine analysis of spent automobile catalysts.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.146-156
• /
• 1998

Fly ash produced in coal combustion is a fine-grained material consisting mostly of spherical, glassy, and porous particles. A physical, morphological, and chemical characteristic of fly ash has been analyzed. This study may contribute to the data base of domestic fly ash, the improvement of combustion efficiency, ash recycling and ash collection in the electrostatic precipitator. The physical property of fly ash is determined using a particle counter for the measurement of ash size distribution and gravimeter. Morphological characteristic of fly ash is performed using a scanning electron micrograph and an optical microscope. The chemical components of fly ash are determined using an inductively coupled plasma emission spectrometry (ICP). The distribution of fly ash size was ranged from 15 to 25 $\mu$m in mass median diameter. Exposure conditions of flue gas temperature and duration within the combustion zone of the boiler played an important role on the morphological properties of the fly ash such as shape, relative opacity, coloration, cenosphere and plerosphere. The spherical fly ash might be generated at the condition of complete combustion. The size of fly ash was found to be increased the with particle-particle interaction of agglomeration and coagulation. Fly ash consisted of $SiO_2\;Al_2O_3\;and\;Fe_2O_3$ with 85% and carbon with 3~10% of total mass.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.58-58
• /
• 1999

The diamond films which can be applied to SOD (silicon-on-diamond) structure were deposited on Si(100) substrate using CO/H2 CH4/H2 source gases by microwave plasma chemical vapor deposition(MPCVD), and SOD structure have been fabricated by poly-silicon film deposited on the diamond/Si(100) structure y low pressure chemical vapor deposition(LPCVD). The phase of the diamond film, surface morpholog, and diamond/Si(100) interface were confirmed by X-ray diffraction(XRD), scanning electron microscopy(SEM), atomic force microscopy(AFM), and Raman spectroscopy. The dielectric constant, leakage current and resistivity as a function of temperature in films are investigated by C-V and I-V characteristics and four-point probe method. The high quality diamond films without amorphous carbon and non-diamond elements were formed on a Si(100), which could be obtained by CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5%, respectively. The (111) plane of diamond films was preferentially grown on the Si(100) substrate. The grain size of the films deposited by CO/H2 are gradually increased from 26nm to 36 nm as deposition times increased. The well developed cubo-octahedron 100 structure nd triangle shape 111 are mixed together and make smooth and even film surface. The surface roughness of the diamond films deposited by under the condition of CO/H2 and CH4/H2 concentration ratio of 15.3% and 1.5% were 1.86nm and 3.7 nm, respectively, and the diamond/Si(100) interface was uniform resistivity of the films deposited by CO/H2 concentration ratio of 15.3% are obtained 5.3, 1$\times$10-9 A/cm, 1 MV/cm2, and 7.2$\times$106 $\Omega$cm, respectively. In the case of the films deposited by CH4/H2 resistivity are 5.8, 1$\times$10-9 A/cm, 1 MV/cm, and 8.5$\times$106 $\Omega$cm, respectively. In this study, it is known that the diamond films deposited by using CO/H2 gas mixture as a carbon source are better thane these of CH4/H2 one.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.3
• /
• pp.101-105
• /
• 2006

We fabricated the nano $TiN_x$ by making of reaction between titanium powder and $Si_3N_4$ during planetary milling. The $TiN_x$ powder was sintered by spark plasma sintering machine after mixing with 50 wt% of titanium powder, and the sintered body was heat-treated at $850^{\circ}C$ in order to investigate its hardness property at the elevated temperature. We analyzed crystal structure by XRD. We observed the peaks of $TiN_{0.26}$ and TiN after 10 hours milling, and we observed TiN peak mainly after 20 hours milling. The reacted particle size distribution was investigated by FE-SEM. Increase of milling time, the size of reacted particles was decreased and the $10{\sim}20nm$ size of $TiN_x$ on the surface of titanium and $TiN_x$ was observed after 20 hours milling. The micro-Vickers hardness of mixed sintered body was about $1050kgf/mm^2$.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.721-727
• /
• 2002

In order to overcome trade-off among compositions, process and properties of the glasses with high PbO-base composition for PDP Rib, we studied glass crystallization and crystallization kinetics by Differential Thermal Analysis(DTA). Glass powder was obtained through melting/cooling/grinding, with 3 wt%TiO2 addition for the crystal nucleation and growth in $62PbO-19B_2O_3-10SiO_2-9(Al_2O_3-K_2O-BaO-ZnO)$(in wt%) composition glass. This powder was heat-treated for 1 to 10 h at $445^{\circ}C$ for nucleation. DTA measurements were performed to obtain the crystallization peak with $5∼25^{\circ}C/min$ heating rates. DTA crystallization peak temperature increased with increasing the heating rate and decreased with increasing the heating time. Because the Avrami parameter (n) was approximately 1, the surface crystallization occurred. The maximum nucleation time was 2 h.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.2
• /
• pp.174-183
• /
• 2001

During the rapid phase of gonadal development of the freshwater teleost, the catfish (Silurus asotus), the influence of hCG upon the inducement of final oocyte maturation and spawning was investigated electrophoretically and ultrastructurally. The electrophoretic patterns obtained were different in the presence and absence of some of the major or minor zones, because of the hormone level in catfish. The vitellogenin of hormone-treated fish was stained more intensively than that of sham-treated fish. These proteins showed some minor or main bands of egg extracts which migrated at positions corresponding to molecular weights of approximately 90,000. However, the thickness of electrophoretic band in molecular weight for hCG-treated fish was slightly lower than that for saline control. It seemed the plasma protein with molecular weight of approximately 45,000 in hCG-treated fish disappeared. In contrast to the control fish, the ovaries in the catfish treated with hCG shows a marked ultrastructural change under the electron microscope. No dilated profiles were seen in the granulosa cells of the mature oocyte before ovulation. After germinal vesicle breakdown (GVBD), the zona radiata interna (ZRI) becomes more compact, and there is a loss of all the processes from the pore canals. There is a wide space between the vitelline membrane and zona radiata. Also, during final maturation, the microvillar processes from the oocyte are seen no longer to penetrate deeply into the extracellular spaces of the overlying granulosa cells, and the reticulate patterns of the zona radiata interna becomes occluded, giving the zona radiata a more solid appearance. It has been possible to initiate 100% oocyte maturation in yolk granules and follicles in vivo by treatment with hCG and a high water temperature ($27^{\circ}C$). In hCG-treated fish, the percentages of successful artificial fertilization and hatching were maximal at 15 h after a single injection. It seems clear that a long acting preparation containing hCG can be successfully used in prespawning fish to advance the final events of gonadal maturation and initiate spawning. Further studies are necessary to evaluate the potential of hCG to either stimulate or inhibit the reproductive development of fish at other stages of the seasonal reproductive cycle.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.5
• /
• pp.490-498
• /
• 2011

Two consecutive feeding trials investigated the effects of feeding rate and pellet expansion by water-soaking on the growth performance, blood components and histology of olive flounder Paralichthys olivaceus. The first two experiments were carried out to determine the effects of pellet expansion and feeding rate. In the first experiment, growth performance, feed utilization and survival of fish were not significantly affected by pellet expansion for six weeks. There were no significant differences in hematocrit, hemoglobin, aspartate aminotransferase, alanine aminotransferase, glucose and total protein of fish fed the expanded pellet. However, whole-body lipid content of fish in the non-expanded group was significantly higher than that in the expanded group. Histological analysis of the anterior intestine revealed that fish in the expanded group had shorter and smaller mucous folds. These results indicate that pellet expansion had no beneficial effect in terms of growth performance, feed utilization and fish health. In the second experiment, weight gain and feed efficiency were significantly increased as feeding rate increased from 0 to 2.5% body weight per day (BW/d), but there were no significant differences in weight gain or feeding efficiency in fish fed the expanded pellet at ratios of 2.5% BW/d and satiation for three weeks. Plasma aspartate aminotransferase activity of fish fed the expanded pellet at a ratio of 2.5% was significantly lower than that of starved fish. Histological analysis of the anterior intestine revealed that fish in the 0% group had shorter mucous folds. Broken-line regression analysis suggested that the optimum juvenile olive flounder feeding rate was 3.5% BW/d during the low temperature season ($16-17^{\circ}C$).