• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.234-239
• /
• 1999

A Abstract Yttria-stabilized zirconia(YSZ) thin films were synthesized by plasma enhanced chemical vapor deposition process. $Zr[TMHD]_4$ $Y[TMHD]_3$ precursors and oxygen were used with the deposition temperature of $425^{\circ}C$ and rf power ranging 0-100 watt. Effects of the deposition parameters were studied by X-ray diffraction and thickness anal­ysis. YSZ thin films have cubic crystal structure with (200) orientation. From the results of EDX analysis, the converte ed content of TEX>$Y_2O_3$ was determined to be 0-36%, and the film thickness was increased with bubbling temperature which is considered to be due to increasing TEX>$Y_2O_3$ flux. The depth profiles of Zr, Y and 0 appeared relatively $\infty$nstant through film thickness. Columnar grains of $1000~2000\AA$ grew vertical to the substrate surface for the case of Ar carri­er gas. In case of He carrier gas, the grain size was observed to be about $1000~2000\AA$. X-ray diffraction data showed the increase of lattice constant with TEX>$Y_2O_3$ content. It was that the presence of the cracks formed during film deposition, partially released the stress generated by the increase of lattice constant.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.1
• /
• pp.1-25
• /
• 1996

The pathogenesis of atherosclerosis can not be summarized as a single process. Lipid infiltration hypothesis and endothelial injury hypothesis have been proposed and investigated. Recent developments show that there are many points of potential interactions between them and that they can actually be regarded as two phases of a single, unifying hypothesis. Among the many risk factors of atherosclerosis, plasma homocysteine and lipoprotein(a) draw a considerable interest because they are independent indicators of atherogenicity. Triglyceride (TG)-rich lipoproteins (chylomicron and VLDL) are not considered to be atherogenic but they are related to the metabolism of HDL cholesterol and indirectly related to coronary heart disease (CHD). LDL can of itself be atherogenic but the oxidative products of this lipoprotein are more detrimental. HDL cholesterol has been considered to be a favorable cholesterol. The so-called 'causalist view' claims that HDL traps excess cholesterol from cellular membranes and transfers it to TG-rich lipoproteins that are subsequently removed by hepatic receptors. In the so-called 'noncausalist view', HDL does not interfere directly with cholesterol deposition in the arterial wall but instead reflects he metabolism of TG-rich lipoproteins and their conversion to atherogenic remnants. Approximately 70-80% of the human population shows an effective feedback control mechanism in cholesterol homeostasis. Type of dietary fat has a significant effect on the lipoprotein cholesterol metabolism and atherosclerosis. Generally, saturated fatty acids elevate and PUFA lower serum cholesterol, whereas MUFA have no specific effect. EPA and DHA inhibit the synthesis of TG, VLDL and LDL, and may have favourable effects on some of the risk factors. Phospholipids, particularly lecithin, have an antiatherosclerotic effect. Essential phospholipids (EPL) may enhance the formation of polyunsaturated cholesteryl ester (CE) which is less sclerotic and more easily dispersed via enhanced hydrolysis of CE in the arterial wall. Also, neutral fecal steroid elimination may be enhanced and cholesterol absorption reduced following EPL treatment. Antioxidants protect lipoproteins from oxidation, and cells from the injury of toxic, oxidized LDL. The rationale for lowering of serum cholesterol is the strong association between elevation of plasma or serum cholesterol and CHD. Cholesterol-lowing, especially LDL cholesterol, to the target level could be achieved using diet and combination of drug therapy. Information on the link between cholesterol and CHD has decreased egg consumption by 16-25%. Some clinical studies have indicated that dietary cholesterol and egg have a significant hypercholesterolemic effect, while others have indicated no effect. These studies differed in the use of purified cholesterol or cholesterol in eggs, in the range of baseline and challenge cholesterol levels, in the quality and quantity of concomitant dietary fat, in the study population demographics and initial serum cholesterol levels, and clinical settings. Cholesterol content of eggs varies to a certain extent depending on the age, breed and diet of hens. However, egg yolk cholesterol level is very resistant to change because of the particular mechanism involved in yolk formation. Egg yolk contains a factor of factors responsible for accelerated cholesterol metabolism and excretion compared with crystalline cholesterol. One of these factors could be egg lecithin. Egg lecithin may not be as effective as soybean lecithin in lowering serum cholesterol level due probably to the differences of fatty acid composition. However, egg lecithin may have positive effects in hypercholesterolemia by increasing serum HDL level and excretion of fecal cholesterol. The association of serum cholesterol with egg consumption has been widely studied. When the basal or control diet contained little or no cholesterol, consumption of 1 or 2 eggs daily increased the concentration of plasma cholesterol, whereas that of the normolipemic persons on a normal diet was not significantly influenced by consuming 2 to 3 eggs daily. At higher levels of egg consumption, the concentration of HDL tends to increase as well as LDL. There exist hyper-and hypo-responders to dietary (egg) cholesterol. Identifying individuals in both categories would be useful from the point of view of nutrition guidelines. Dietary modification of fatty acid composition has been pursued as a viable method of modifying fat composition of eggs and adding value to eggs. In many cases beneficial effects of PUFA enriched eggs have been demonstrated. Generally, consumption of n-3 fatty acids enriched eggs lowered the concentration of plasma TG and total cholesterol compared to the consumption of regular eggs. Due to the highly oxidative nature of PUFA, stability of this fat is essential. The implication of hepatic lipid accumulation which was observed in hens fed on fish oils should be explored. Nutritional manipulations, such as supplementation with iodine, inhibitors of cholesterol biosynthesis, garlic products, amino acids and high fibre ingredients, have met a limited success in lowering egg cholesterol.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.165-171
• /
• 1998

The $Y_1Ba_2Cu_3O_{7-x}$(123) superconductor powders were prepared by pyrophoric synthesis method(PSM) using $Y_2O_3$(99.9%), $BaCO_3$(99.9%), and CuO(99.9%) powders. The phase formation and reaction kinetics of 123 superconductor manufactured with powders prepared in various pHs of pyrophoric synthetic solution have been studied through the experiments at various heat treatment temperatures and times. Inductively coupled plasma(ICP) spectroscopy and scanning electron microscopy(SEM) measurements were performed to examine the composition and morphology of the sample. X-ray diffraction(XRD) analysis was done to determine phase formation and conversion ratio of Y-Ba-Cu-O systems. The 123 powder prepared at pH 7(${\pm}0.3$) yields the best result in terms of purity, homogeneity, and reactivity. The activation energies(${\Delta}E_a$) of 123 phase formation were found to be 191 kJ/mol and 230kJ/mol in solid state reaction method and pyrophoric synthesis method, respectively.

• The Journal of Internal Korean Medicine
• /
• v.26 no.1
• /
• pp.182-198
• /
• 2005

Object : This study was designed to research whether the protection and inhibitory effects of cardiovascular diseases in L-NAME induced rat or ECV 304 cell lines through the Cell morphological pattern, Tunel assay, LDH activity, heart rate, blood pressure and immunohistochemistric analysis by Boonsimgieum water extract Methods : Nitric oxide(NO) play an important role in normal and pathophysiological cells including as a messenger molecule, neurotransmitter, microbiocidal agent, or dilator of blood vessels and artheriosclerosis, hypertension, myocardial infarction, respectively. Endothelial cell products can modulate the magnitude of a response to a vasoconstrictor, as evinced by the greater constriction after endothelium removal or NO synthesis blockade. To investigate that Boonsimgieum in the potential contribution of the levels of nitric oxide generated by endothelial nitric oxide synthase (eNOS) and the mechanisms of protection against NG-nitro-L-arginine methyl ester (L-NAME), human ECV 304 cells, which normally do not express eNOS, were expressed by L-NAME. L-NAME stimulated rat or cells were found to be resistant to injury and delayed death following the Boonsimgieum. Inhibition of nitric oxide synthesis abolished the protective effect against L-NAME, thrombin and collagen exposure. Interestingly, such effects have been observed during stimulation with agents such as phenylephrine and KCl on L-NAME mediate rats, were damaged by the NOS inhibitor L-NAME. Result : As the result of this study, In group, the anti-apoptosis and necrosis in the cardiovascular system have a potential capacity for prevented, protected and treating the diseases of cardiovascular system, against the necrosis of rat and ECV 304 cells with Caspase 3 and calpain expression by L-NAME is promoted. Conclusion : these results demonstrate neuroprotective and memory enhancing effects of ZIBU, suggesting its beneficial actions for the treatment of AD.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3250-3259
• /
• 2022

A new approach to the use of rice straw as a difficult-to-recycle agricultural waste was proposed. Potassium aluminosilicate was obtained by spark plasma sintering as an effective material for subsequent immobilization of ¹³⁷Cs into a solid-state matrix. The sorption properties of potassium aluminosilicate to ¹³⁷Cs from aqueous solutions were studied. The effect of the synthesis temperature on the phase composition, microstructure, and rate of cesium leaching from samples obtained at 800-1000 ℃ and a pressure of 25 MPa was investigated. It was shown that the positive dynamics of compaction was characteristic of glass ceramics throughout the sintering. Glass ceramics RS-(K,Cs)AlSi₃O₈ obtained by the SPS method at 1000 ℃ for 5 min was characterized by a high density of ~2.62 g/cm³, Vickers hardness ~ 2.1 GPa, compressive strength ~231.3 MPa and the rate of cesium ions leaching of ~1.37 × 10^-7 g cm^-2·day^-1. The proposed approach makes it possible to safe dispose of rice straw and reduce emissions into the atmosphere of microdisperse amorphous silica, which is formed during its combustion and causes respiratory diseases, including cancer. In addition, the obtained is perspective to solve the problem of recycling long-lived ¹³⁷Cs radionuclides formed during the operation of nuclear power plants into solid-state matrices.

• Journal of Powder Materials
• /
• v.21 no.4
• /
• pp.301-306
• /
• 2014

Titanium alloys are extensively used in high-temperature applications due to their excellent high strength and corrosion resistance properties. However, titanium alloys are problematic because they tend to be extremely difficult-to-cut material. In this paper, the powder synthesis, spark plasma sintering (SPS), bulk material characteristics and machinability test of hybrid $Ti_2AlC$ ceramic bulk materials were systematically examined. The bulk samples mainly consisted of $Ti_2AlC$ materials with density close to theoretical value were synthesized by a SPS method. Random orientation and good crystallization of the $Ti_2AlC$ was observed at $1100^{\circ}C$ for 10 min under SPS sintering conditions. Scanning electron microscopy results indicated a homogeneous distribution and nano-laminated structure of $Ti_2AlC$ MAX phase. The hardness and electrical conductivity of $Ti_2AlC$ were higher than that of Ti 6242 alloy at sintering temperature of $1000^{\circ}C{\sim}1100^{\circ}C$. Consequently, the machinability of the hybrid $Ti_2AlC$ bulk materials is better than that of the Ti 6242 alloy for micro-EDM process of micro-hole shape workpiece.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.3
• /
• pp.135-145
• /
• 2011

Accurate process characterization and optimization are the first step for a successful advanced process control (APC), and they should be followed by continuous monitoring and control in order to run manufacturing processes most efficiently. In this paper, process characterization and recipe optimization methods with multiple outputs are presented in high density plasma-chemical vapor deposition (HDP-CVD) silicon dioxide deposition process. Five controllable process variables of Top $SiH_4$, Bottom $SiH_4$, $O_2$, Top RF Power, and Bottom RF Power, and two responses of interest, such as deposition rate and uniformity, are simultaneously considered employing both statistical response surface methodology (RSM) and neural networks (NNs) based genetic algorithm (GA). Statistically, two phases of experimental design was performed, and the established statistical models were optimized using performance index (PI). Artificial intelligently, NN process model with two outputs were established, and recipe synthesis was performed employing GA. Statistical RSM offers minimum numbers of experiment to build regression models and response surface models, but the analysis of the data need to satisfy underlying assumption and statistical data analysis capability. NN based-GA does not require any underlying assumption for data modeling; however, the selection of the input data for the model establishment is important for accurate model construction. Both statistical and artificial intelligent methods suggest competitive characterization and optimization results in HDP-CVD $SiO_2$ deposition process, and the NN based-GA method showed 26% uniformity improvement with 36% less $SiH_4$ gas usage yielding 20.8 ${\AA}/sec$ deposition rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.212-212
• /
• 2016

2차원 탄소나노재료인 그래핀은 우수한 물성으로 인하여 광범위한 분야로 응용이 가능할 것으로 예상되어 많은 주목을 받아왔다. 이러한 그래핀의 응용가능성을 실현시키기 위해서는 보다 손쉽고 신뢰할 수 있는 합성방법의 개발이 필요한 실정이다. 그래핀의 합성 방법들로 흑연을 물리적 및 화학적으로 박리하거나, 특정 결정표면 위에 방향성 성장의 흑연화를 통한 합성, 그리고 열화학기상증착법(Thermal chemical vapor deposition; T-CVD) 등의 합성방법들이 제기되었다. 이중 T-CVD법은 대면적으로 두께의 균일성이 높은 그래핀을 합성하기 위한 가장 적합한 방법으로 알려져 있다. 그러나 일반적으로 T-CVD공정은 원료 가스인 탄화수소가스를 효율적으로 분해하기 위하여 $1000^{\circ}C$부근의 온공정이 요구되며, 이는 산업적인 응용의 측면에서 그래핀의 접근성을 제한한다. 따라서 대면적으로 고품질의 그래핀을 저온합성 할 수 있는 공정의 개발은 필수적이다. 본 연구에서는, 플라즈마를 이용하여 원료가스를 효율적으로 분해함으로써 그래핀의 저온합성을 도모하였다. 퀄츠 튜브로 구성된 수평형 합성장치는 플라즈마 방전영역과 T-CVD 영역으로 구분되며, 방전되는 유도결합 플라즈마는 원료가스를 효율적으로 분해하는 역할을 한다. 합성을 위한 기판과 원료가스로는 각각 전자빔 증착법을 통하여 300nm 두께의 니켈 박막이 증착된 실리콘 웨이퍼와 메탄가스를 이용하였다. 저온합성공정의 변수로는 인가전력과 합성시간으로 설정하였으며, 공정변수의 영향을 확인함으로써 그래핀의 저온합성 메커니즘을 고찰하였다. 연구결과, 인가전력이 증가되고 합성시간이 길어짐에 따라 원료가스의 분해효율과 공급되는 탄소원자의 반응시간이 보장되어 그래핀의 합성온도가 저하가능함을 확인하였으며, $400^{\circ}C$에서 다층 그래핀이 합성됨을 확인하였다. 또한 플라즈마 변수의 보다 정밀한 제어를 통해 합성온도의 저온화와 그래핀의 결정성 향상이 가능할 것으로 예상된다.

• Journal of the Korean Ceramic Society
• /
• v.55 no.6
• /
• pp.570-575
• /
• 2018

Hydroxyapatites (HAps) were synthesized using the powdered waste of fishery products, i.e., fish scales and crab shells, as starting materials. HAp was synthesized by a wet-chemistry method followed by calcination at 600 and $800^{\circ}C$. Calcined crabshell powder revealed a single HAp phase and fine powder, while calcined fish-scale powder showed a ${\beta}-TCP$ secondary phase, even at the higher calcination temperature. Dense HAp pellets were obtained from the crab-shell powder by spark plasma sintering at $1000^{\circ}C$ for 10 min under applied pressures of 40 and 80 MPa in a vacuum state, giving sample densities of 2.93 and $3.06g/cm^3$, respectively. The estimated grain size of HAp was $448{\pm}96$ and $283{\pm}59nm$ for applied pressures of 40 and 80 MPa, respectively. In contrast, the HAp obtained using the pressureless sintering technique showed excessive grain growth without further densification.