• 전기학회논문지
• /
• 제56권7호
• /
• pp.1275-1281
• /
• 2007

The discharge phenomena in a flat fluorescent lamp for the backlight unit of liquid crystal displays are simulated by sung a two-dimensional fluid model. The numerical methods for the calculation of plasma dynamics and the radiation transport are introduced for the discharge simulation and for the transmission of the vacuum ultraviolet lights. The simulation results are presented to compare the luminance and the luminance efficacy with the variation of gas pressure, gas mixture ratio, driving voltage, and frequency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1569-1572
• /
• 2007

A two-dimensional fluid simulation code has been developed in order to investigate discharge phenomena and to improve plasma luminous efficiency in a Hg flat fluorescent lamp (FFL) for an LCD backlight unit. In this study, the method of a two-dimensional fluid simulation for FFL is explained and the simulation results of Hg-Ar-Ne mixture gas are presented for the enhancement of the luminance efficiency. The effects of various parameters, such as driving voltage, frequency, and gas mixture ratio, are investigated. The luminance efficiency increased with increasing fraction of mercury but the increasing fraction of argon did not affect the efficiency much.

• 반도체디스플레이기술학회지
• /
• 제7권3호
• /
• pp.1-4
• /
• 2008

The chemical shift of SiOC film was observed according to the flow rate ratio. SiOC film had the broad main band of $880\sim1190cm^{-1}$ and the sharp Si-$CH_3$ bond at $1252cm^{-1}$, and the peak position of the main bond in the infrared spectra moved to high frequency according to the increasing of an BTMSM flow rate. So the increment of the alkyl group induced the C-H bond condensation in the film, and shows the blueshift in the infrared spectra. In the case of P5000 system of Applied Materials Corporation, the strong bond of Si-CH3 bond in precursor does not enough to dissociated and ionized, because low plasma energy due to the capactive coupled CVD. Therefore, there was the sharp peak of Si-$CH_3$ bond at $1252cm^{-1}$.

• Journal of the Optical Society of Korea
• /
• 제12권1호
• /
• pp.31-37
• /
• 2008

To increase output power of a He-Ne laser we propose to use the capacitive rf discharge and implement four channel structure. Most of experiments were carried out with a single laser tube from this structure to optimize the output mirror transmission, pressure and composition of the mixture. A laser tube of 2.8 mm inner diameter and 50 cm discharge length can give an output power of above 5.5 mW at 3.39 ${\mu}m$. Four such tubes in "matrix" structure let us obtain 20 mW of output. Simplified models which can be used to evaluate the behavior of an equivalent electrical circuit with laser plasma and qualitative characteristics of output power of He-Ne laser were also described.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.957-960
• /
• 2008

The influences of silicon and MgO seed particle on the reconstruction characteristics of MgO protective layer were investigated to clarify the mechanism of reconstruction and exaggerated grain growth (EGG) in AC-PDP. The reconstruction and EGG are closely correlated with the driving force for nucleation and growth, interface energy and initial size distribution of MgO protective layer in plasma space during discharge in AC-PDP.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.872-876
• /
• 2006

This study was made to examine the electromagnetic interference(EMI) shielding effect (SE) of multilayered thin films in which indium-tin oxide(ITO) and Ag were deposited alternately from 3layer to 9 layer on Poly Methyl Meth Acrylate(PMMA) substrate at room temperature using a PF sputtering. We measured optical and electrical characteristics by UV-spectrometer and 4 point probe. The measurement of EMI SE in frequency range from 50MHz to 1.5GHz was performed by using ASTM D4935-89 method. We compared the measured EMI SEs with theoretical simulation data. We obtained relatively low resistivity and high transmittance from the EMI SE multilayers. In this study, we obtain good optical electrical characteristics with a minimun transmittance of about 60% at 550nm wavelength and sheet resistance of $2{\sim}3ohm/sq$., respectivity. Measured EMI SEs were over 50dB and similar to theoretical simulation data.

• The Korean Journal of Ceramics
• /
• 제4권1호
• /
• pp.9-14
• /
• 1998

Diamond-like carbon(DLC) films were deposited on buffer-layered ZnS substrates by radio frequency plasma enhanced chemical vapor deposition(RF-PECVD) method. Ge and GeC buffer layera were used between DLC and ZnS substrates to promote the adhesion of DLC on ZnS substrates. Ge buffer layers were sputter deposited by RF magnetron sputtering and $GeC^1$ buffer layers were deposited by same method except using acetylene reactive gas. The relatinship between film properties and deposition conditions was investigated using gas pressure, RF power and dc bias voltage as PECVD parameters. The hardness of DLC films were measured by micro Vickers hardness test and the adhesion of DLC films on buffer-layered ZnS substrates were studied by Sebastian V stud pull tester. The optical properties of DLC films on butter-layered ZnS substrates were characterized by ellipsometer and FTIR spectroscopy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.309-309
• /
• 2010

Silicon Nitride(SiN) 박막을 펄스드 플라즈마 응용화학기상법을 이용하여 저 소스전력의 $SiH_4-N_2$ 플라즈마에서 증착하였다. Duty ratio의 변화에 따른 이온에너지와 굴절률의 변화를 고찰하였다. 저이온에너지는 증착률과 강한 상관성을 보였다. 이온에너지 변수의 증착률에의 영향은 신경망 모델을 이용하여 고찰하였다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2002년도 춘계 국제 학술대회
• /
• pp.60-63
• /
• 2002

Objectives : To estimate the correlation of blood lead level of families and environmental factors and infer its influence on blood lead levels in the Korean urban area in Seoul Korea. Methods : The study subjects comprised 499 men and 489 women from 366 families and we analyzed the blood lead level using induced coupled plasma/mass spectroscopy and had interviews. Results : The mean blood lead level of men was 3.00 $\mu\textrm{g}$/dL. The stastical analysis of this study used the tool of frequency rate and t-test between blood lead levels of families and environmental factors. Especially father's smoking and dusty workplace environment showed significancy to blood lead levels. Conclusion : There was positive relationship of blood lead level to several environmental factors. These facts show outdoor environment is more influential than home environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1910-1912
• /
• 1996

This paper presents the results of laboratory experimentals to remove $SO_2$ and $NO_x$ by a pulsed corona discharge in the wire-plate reactor. A rotating spark gap switch was used to generate the pulse by chewing the dc high voltage. Repetition frequency of the pulse was 60Hz and rising time of 50ns. The photo pictures of positive streamer corona taken by ICCD camera, pulse voltage and current were measured using a digital oscilloscope. Simultaneous effects of $C_{2}H_{4}$ injection and heterogeneous chemical reactions on nonthermal plasma process to remove $SO_2$ and $NO_x$ from flue gas were investigated in the present study