• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.177-177
• /
• 2010

고효율 비정질 실리콘 박막 태양전지 제작을 위해서는 광파장대에서 optical confinement 능력을 최대화할 수 있는 기술이 필수적이다. 효율적인 photon trapping을 위해서는 back reflector를 사용하거나 전면전극인 투명전도성막의 표면에 요철을 형성하여 포획된 태양광의 내부 반사를 증가시키거나 전면 투명전극에서 반사를 감소시켜 태양광의 travel length를 증가시키는 방법이 일반적이며, 이를 통해 흡수층의 효율을 최대화할 수 있다. 이 중 전면전극으로 사용되는 투명전도성막은 불소가 도핑된 tin-oxide가 주로 사용되었으나, 최근 들어 Al이 도핑된 산화아연막을 이용한 비정질 실리콘 박막 태양전지 개발에 대한 연구도 활발히 진행되고 있다. 투명전극 증착후 표면의 유효면적을 증가시키기 위해 염산 용액을 이용하여 표면 텍스쳐링을 수행한다. 그후 흡수층인 p-i-n 층을 플라즈마 화학기상증착법을 이용하여 형성하는 것이 일반적이다. 이때 표면처리 된 투명전극은 수소플라즈마에 대해 특성이 변하지 않아야 고효율 비정질 실리콘 박막 태양전지 제조에 적용될 수 있다. 본 연구에서는 표면처리 된 AZO 투명전극의 수소플라즈마에 의한 특성 변화에 대해 고찰하였다. 먼저 AZO 투명전극은 스퍼터링 공정을 적용하여 $1\;{\mu}m$두께로 증착하였고, 0.5 wt%의 HCl 용액을 이용하여 습식 식각을 수행하였다. 수소플라즈마 처리 조건은 $H_2$ flow rate 30 sccm, working pressure 20 mtorr, RF power 300 W, Temp $60^{\circ}C$ 이며 3분간 진행하였다. 표면형상은 수소플라즈마 전 후에는 큰 차이를 보이지 않았으며 AZO의 grain size는 각각 220 nm, 210 nm로 관찰되었다. 투명전극의 가장 중요한 특성인 가시광선 영역에서의 투과도는 수소플라즈마 처리전에는 90 % 이상의 투과도를 보였으나, 수소플라즈마 처리 후에는 85 %로 약간 저하된 특성을 보였다. 그러나 이는 박막 태양전지용 전면전극으로 사용하기 위한 투과도인 80 % 이상을 만족하는 결과로, 비정질 박막 실리콘 태양전지 제작에 사용될 수 있다. 또 하나의 중요한 특성인 Haze factor 역시 수소플라즈마 처리 전 후 모두 10 이상의 값을 나타냈다. 하지만 고효율 실리콘 박막 태양전지에 적용하기 위해서는 Haze factor를 증가시키는 공정 개발에 대한 추가 연구가 필요하다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.27-31
• /
• 2007

Among oriental medicine, sulfur is known to generate heat in the human body. Since body warming reaction results in the consumption of energy source, the medicines containing sulfur could help in the weight loss of laboratory rats. This study was designed to determine the possible weight loss effects of Hangbisan, sulfur based oriental medicine, on ob/ob mice. The obese mice were fed with standard diet containing 10% (w/w) Hangbisan or 10% (w/w) cellulose during 12 weeks. Hangbisan affected the weight loss of obese mice as cellulose did during experimental periods, while also reducing the level of plasma total cholesterol. These results suggest that dietary Hangbisan improved the composition of blood profiles in obese mice, and therefore has potential as an anti-obesity ingredient in the application of oriental medicine compounds.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.5
• /
• pp.356-360
• /
• 2016

Recently, the lifetime extension of nuclear power plants has been considered. Thus, it is necessary to consider facility safety management and economic management. However, when the bolts in nuclear power plants are replaced and the turbines of nuclear power plant are disassembled, numerous problems are found in relation to stuck bolts in clamping parts. In order to solve these problems, a hybrid vacuum chamber was first designed and manufactured. It can perform arc ion plating and sputtering, which were used to deposit Ti/TiN on an A913 B7 bolt. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were conducted to determine the composition and characteristics of the bolt, and tests were conducted to determine how long the bolt could endure under various conditions in a nuclear power plant. The SEM and XRD results clearly showed a continual and even coating layer. When this TiN-coated bolt is used in a nuclear power plant, the lifetime can be extended compared to a conventional bolt, but it is necessary to determine what additional properties are required.

• Korean Journal of Materials Research
• /
• v.4 no.5
• /
• pp.510-515
• /
• 1994

Yttria-stabilized zirconia(YSZ) films were prepared onto p-type (100) silicon wafer by a plasma-enhanced metallorganic chemical vapor deposition(PE MO CVD) processing involving the application of vapor mixture of tri(2.2.6.6-tetramethyl-3, 5-heptanate) yttrium$[Y(DPM)_3]$, zirconiumtriflouracethyla cetonate$(Zr(tfacac)_4$ and oxygen gas. The x-ray diffraction(XRD) and fourier transform infrared spectra(FT1R) results showed that the deposited YSZ films had a single cubic phase. $Y_2O_3$ content of YSZ film was analyzed by PIXE(partic1e induced x-ray emission). The experimental results by PIXE revealed that 12.lmol%, 20.4mol% and 31.6mol% $Y_2O_3$ could be obtained as the $Y(DPM)_3$ bubbling temperature varied at $160^{\circ}C, 165^{\circ}C$ and $170^{\circ}C$ respectively. The increase of $Y(DPM)_3$ bubbling temperature caused shifting flat band voltage to have a negative value.

• Journal of Powder Materials
• /
• v.26 no.5
• /
• pp.389-394
• /
• 2019

In the present study, we have investigated the effect of sintering process conditions on the stability of the austenite phase in the nanocrystalline Fe-5wt.%Mn-0.2wt.%C alloy. The stability and volume fraction of the austenite phase are the key factors that determine the mechanical properties of FeMnC alloys, because strain-induced austenite-martensite transformation occurs under the application of an external stress at room temperature. Nanocrystalline Fe-5wt.%Mn-0.2wt.%C samples are fabricated using the spark plasma sintering method. The stability of the austenite phase in the sintered samples is evaluated by X-ray diffraction analysis and hardness test. The volume fraction of austenite at room temperature increases as the sample is held for 10 min at the sintering temperature, because of carbon diffusion in austenite. Moreover, water quenching effectively prevents the formation of cementite during cooling, resulting in a higher volume fraction of austenite. Furthermore, it is found that the hardness is influenced by both the austenite carbon content and volume fraction.

• Particle and aerosol research
• /
• v.15 no.1
• /
• pp.1-13
• /
• 2019

Current desulfurization and denitrification technologies have reached a considerable level in terms of reduction efficiency. However, when compared with the simultaneous reduction technology, the individual reduction technologies have issues such as economic disadvantages due to the difficulty to scale-up apparatus, secondary pollution from wastewater/waste during the treatment process, requirement of large facilities for post-treatment, and increased installation costs. Therefore, it is necessary to enable practical application of simultaneous SOx and NOx treatment technologies to remove two or more contaminants in one process. The present study analyzes a technology capable of maintaining simultaneous treatment of SOx and NOx even at low temperatures due to the electrochemically generated strong oxidation of the wet-pulse complex system. This system also reduces unreacted residual gas and secondary products through the wet scrubbing process. It addresses common problems of the existing fuel gas treatment methods such as SDR, SCR, and activated carbon adsorption (i.e., low treatment efficiency, expensive maintenance cost, large installation area, and energy loss). Experiments were performed with varying variables such as pulse voltage, reaction temperature, chemicals and additives ratios, liquid/gas ratio, structure of the aeration cleaning nozzle, and gas inlet concentration. The performance of individual and complex processes using the wet-pulse discharge reaction were analyzed and compared.

• Tribology and Lubricants
• /
• v.35 no.2
• /
• pp.132-138
• /
• 2019

In this study, we demonstrate the effects of the acidic properties of montmorillonite (MMT), which is commonly used as a catalyst, on the conversion and selectivity of the dimer acid methyl ester (DAME) synthesis. We synthesize DAME by the dimerization of conjugated linoleic acid methyl ester (CLAME) and oleic acid methyl ester using MMT KSF. Incidentally, trimer acid methyl ester was formed as a by-product during the DAME synthesis. There is a necessity to adequately adjust the strength and quantity of the acid site to control the selectivity of DAME. Therefore, we vary the pH of the MMT acid by using various metal hydroxides. The purpose of this study is to increase the yield of monocyclic dimer acid methyl ester, which is a substance with adequate physical properties for industrial applications (e.g., lubricant and adhesive, etc.), using a heterogeneous catalyst. We report the dimerization of fatty acid methyl ester by using base treated-KSF, and apply it to conjugated soybean oil methyl ester. Then, we transmute the acid site properties of KSF, such as pH of 5 wt.% slurry KSF and various alkali metals (Li, Na, K, Ca). Characterization of base treated-KSF using a pH meter, x-ray diffraction, inductively coupled plasma-atomic emission spectrometer, Brunauer-Emmett-Teller surface analysis, and temperature-programmed desorption. We conduct an analysis of CLAME and DAME using nuclear magnetic resonance spectroscopy, gas chromatography, and gel permeation chromatography. Through these experiments, we demonstrate the effects of the acidic properties of KSF on the conversion and selectivity of the DAME synthesis, and evaluate its industrial potential by application to waste vegetable oil.

• Journal of Animal Reproduction and Biotechnology
• /
• v.36 no.4
• /
• pp.194-202
• /
• 2021

In this study the effect of vitamin C administration on pregnancy rates during summer heat stress in dairy cows was examined. A total of 80 Holstein-Friesian cows were divided into control and treatment groups (n = 40 each). Control group animals were given 10 mL isotonic normal saline, and treatment group, Vitamin C (4 mg/kg) on artificial insemination day (day 0) and 4^th, 8^th and 12^th day post insemination. Pregnancy diagnosis was performed on 30^th day post insemination by ultrasonography. Blood samples were randomly taken from 11 animals from each group. Serum P₄, GSH, MDA and plasma 8-OHdG levels were determined by using ELISA method. Results showed that 8-OHdG levels were lower in treatment group on day 4, 8 and 12 (p < 0.05) compared with the control group. Similarly, pregnancy rate was higher in treatment group (32.5%) than control (22.5%), respectively. However, MDA, P₄ and GSH levels were similar in both groups at 4^th, 8^th and 12^th day. A gradual increase in P₄, and MDA levels, and a strong positive correlation between 0, 4^th (r = 0.54), 4, 8^th (r = 0.59) and 8, 12^th (r = 0.51) day was found. Similarly, GSH levels also showed positive correlation at days 0, 4^th (r = 0.47) and 4, 8^th (r = 0.56). However, a strong negative correlation (r = -0.56) between MDA day 0, and GSH day 8 was found. In conclusion, vitamin C application during insemination period in postpartum cows increases pregnancy rate, and reduces oxidative stress metabolite 8-OHdG levels.

• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1666-1674
• /
• 2022

Objective: Letrozole, a potent aromatase inhibitor, is known to have the potential to modify male reproductive function by altering sex hormone levels. This study aimed to evaluate the semen and testicular characteristics and hormonal profile of aged Mrakhoz bucks (Capra hircus) treated with letrozole. Methods: Twelve Markhoz male goats, aged between 4.5 to 5.5 years with an average body weight (BW) of 61.05±4.97 kg were used for the study. Animals were randomly divided into two equal groups and subcutaneously received either 0.25 mg/kg BW of letrozole or a control every week for 2 months. The semen collections were performed every 10 days, and blood samples and testicular biometric records were collected at 20 days intervals. Results: Letrozole causes increased testosterone and follicle-stimulating hormone levels, testosterone to estradiol ratio, semen index and reaction time during the period from 20th to 60th days (p<0.05). Furthermore, letrozole-treated bucks had higher semen volume, sperm concentration, and total sperm per ejaculate from 30th to 60th days (p<0.05). However, no differences occurred between the groups in scrotal circumference, relative testicular volume, semen pH, abnormality, acrosome integrity, and membrane integrity of sperm during the study (p>0.05). The serum luteinizing hormone levels, sperm viability, motility, and progressive motility increased, and estradiol levels decreased after 40th to 60th days of letrozole treatment (p<0.05). Conclusion: Letrozole application to aged Markhoz bucks provokes reproductive hormonal axis which, in turn, induces enhancement of semen production and quality.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.4
• /
• pp.31-40
• /
• 2016

Recently, technology of Virtual Reality(VR) based on HMD among various kinds of VR implemented products has received widespread attention. Major IT-related companies around the world participated in VR HMD research and development. Therefore, the possibility of the spread of VR HMD has been highly praised. Demands of VR HMD products using Smart Phone has been especially increased so that it is required to create a high quality of VR contents. The purpose of study in this paper is to apply the depth value of stereoscopic to VR HMD. To implement it, we analyzed VR HMD optical system and converted an experimental image to virtual depth caused by binocular disparity based on the result of calculating NPP(Native Pixel Parallax). We produced the image of stereoscopic applied with the value converted and applied to VR HMD. This study is expected to be utilized as a VR content creation field of quantitative data.