• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.1
• /
• pp.51-64
• /
• 2022

For effective preservation of the rocks, which bearing plant fossils at Gumkwangdong Formation, Pohang, the properties of rock and treatment of chemicals were examined in an artificial weathering test. The rocks are diatomaceous siliceous mudstone, which contain a small amount of smectite and has developed laminated layers. The rocks react with water, the d₀₀₁ spacing of smectite was increased. On the one hand, the physical properties of the rock samples, such as surface hardness, improved after the application of ethyl silicate-based stone strengthener. On the other hand, the spacing of interlayer of swelling clay minerals decreased and spacing of laminae layer increased. When the ethyl silicate-based stone strengthener was applied after pretreatment with a swelling inhibitor, interlayer and spacing of laminae changes were similar to those when only the stone strengthener was treated. The effect of the swelling inhibitor was almost negligible. When the rocks that have been conserved with chemicals react with water, spacing of laminae has widened much, whereas when the rocks was in contact with moisture only, there was little change. In addition, if it is placed in the outdoor after conservation treatment, although it occurs slightly slower than the untreated rock, the separation of the lamination layer and the pulverization of the rock occur within a very short time. Consolidation is required to improve the physical properties of fossil rock, but when exposed to rain and undergoing freeze-thaw process, the effect is lost very quickly. Therefore, regardless of the chemical treatment, it is a priority to prevent direct rainfall contact with the rock.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.11
• /
• pp.1478-1485
• /
• 2000

An experimental study has been performed to investigated the forced convection heat transfer characteristics of 6 circular cylinders in staggered arrangement in a cross flow of air. The water scale deposited on condenser wall of power plant was used to investigate the effect of roughness of scaled surfaces. The relative roughness*average diameter of scale/cylinder diameter) was in a range of k/d=0.0066, 0.0111, 0.0167, 0.0222 and 0.0278. The cylinder spacings(L/d) varies from 1.5 to 4.0 where L denote the cylinder spacings along and normal to the upstream uniform flow direction. The Reynolds number was varied in a range of 10, 000$\leq$ Re $\leq$ 50,000. The local and mean Nusselt numbers were investigated as a function of scale roughness, the cylinder spacing and Reynolds number. The results are compared with those of clean cylinder and inline tube bank, subsequently the mean fouling resistance over the entire circumference was estimated from those results as a function of scale roughness, the cylinder spacing and Reynolds number.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.2
• /
• pp.140-145
• /
• 1995

This experiment was carried out to investigate the effect of plant spacing on the growth and root yield at different harvesting year in Astragalus membranceus. A local variety collected in Jung Sun. Kang Won was used on the 30 and 40cm row spacing, with different spacing between plant of 5, 10, 15, 20cm respectively. Nitrogen, phosphorus and potassium fertilizers were applied as 6, 8 and 9kg/10a respectively, with compost of 1,000kg/10a. Branches, root length, root diameter and root weight were increased in the sparse planting compared with the dense planting. But emergence date, flowering date, stem height and node number were not significantly changed with plant spacing. The highest root yield was 211.8kg/10a at the $30{\time}10cm(67\;plants/m^2)$ in 1 year old plants of Astragalus membranceus. In case of two years old plants, branches, node number, root length, root diameter and root weight were increased in the sparse planting compared to the dense planting. But harvesting ratio was decreased in the dense planting, The highest dried root yield was 292kg/10a at the $40{\time}10cm\;(25\;Plants/m^2)$. In case of 3 years old plants, aerial part and root growth pattern were similar to the 2 years old plants, The dried root yield was highest(623kg/10a) in the $40{\time}10cm(25plants/m^2)$.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.106-110
• /
• 2016

In this study, a planting density-growth-harvest (PGH) chart was developed to easily read the growth and harvest factors such as crop growth rate, relative growth rate, shoot fresh weight, shoot dry weight, harvesting time, marketable rate, and marketable yield of common ice plant (Mesembryanthemum crystallinum L.). The plants were grown in a nutrient film technique (NFT) system in a closed-type plant factory using fluorescent lamps with three-band radiation under a light intensity of $140{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and a photoperiod of 12 h. Growth and yield were analyzed under four planting densities ($15{\times}10cm$, $15{\times}15cm$, $15{\times}20cm$, and $15{\times}25cm$). Shoot fresh and dry weights per plant increased at a higher planting density until reached an upper limit and yield per area was also same tendency. Crop growth rate, relative growth rate and lost time were described using quadratic equation. A linear relationship between shoot dry weight and fresh weights was observed. PGH chart was constructed based on the growth data and making equations. For instance, with within row spacing (= 20 cm) and fresh weight per plant at harvest (= 100 g), we can estimate all the growth and harvest factors of common ice plant. The planting density, crop growth rate, relative growth rate, lost time, shoot dry weight per plant, harvesting time, and yield were $33plants/m^2$, $20g{\cdot}m^{-2}{\cdot}d^{-1}$, $0.27g{\cdot}g^{-1}{\cdot}d^{-1}$, 22 days, 2.5 g/plant, 26 days after transplanting, and $3.2kg{\cdot}m^{-2}$, respectively. With this chart, we could easily obtain the growth factors such as planting density, crop growth rate, relative growth rate, lost time and the harvest factors such as shoot fresh and dry weights, harvesting time, marketable rate, and marketable yield with at least two parameters, for instance, planting distance and one of harvest factors of plant. PGH charts will be useful tools to estimate the growth and yield of crops and to practical design of a closed-type plant production system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.4
• /
• pp.218-221
• /
• 2005

The present study was investigated in the Chittagong hill forest of Bangladesh to assess the feasibility of ginger cultivation under multipurpose forest and fruit tree species. There were three treatments such as i) ginger grown under open field condition, ie. full sunlight (T1), ii) ginger grown under Gamar tree (spacing of $90{\times}90cm$ (T2) and iii) ginger grown under guava tree (spacing $180{\times}180cm$) tree (T3). The experiment was laid out in randomized block design (RBD) and each treatment was replicated three times. From data it was observed that some morphological parameters of ginger such as plant height, number of leaves per plant, leaf length and leaf breadth were higher in the treatments T2 and T3 as compared to the treatment T1. A positive and linear relationship was observed between the weight of rhizome and yield of ginger which caused the highest yield of ginger ($23.63Mg\;ha^{-1}$) under guava tree species at partial shaded condition in the T3 treatment ($180{\times}180cm$), whereas the lowest yield ($15.64Mg\;ha^{-1}$) was recorded in the T2 treatment when ginger was cultivated under Gamar tree species at closer spacing ($90{\times}90cm$). Therefore, it was revealed that partial shaded condition favoured the optimum growth and yield of ginger, whereas the dense shade from intensively planted tree species badly affected the dry matter production and yield of ginger.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.2
• /
• pp.141-151
• /
• 2002

The success of sericulture industry in India is mainly attributed to the well-planned annual sericultural activity and the systematic implementation of pest preventive and control measures. The insect spectrum of silkworm and its food plants is complex and plays a major role in limiting the production of silk. Insects cause extensive damage to plant whereas predators and parasites either kill the silkworm larvae or force them to spin flimsy cocoons. Unilateral control measure against this pest is mainly based on the use of synthetic organic insecticides. Though these approaches initially paid rich dividends, the undesirable consequences soon surfaced. Insecticide induced resurgence of gall midges, leafhopper, leaf roller, secondary pest out breaks and development of pest biotypes has led to realization of Integrated Pest Management in sericulture. Various components of IPM, viz. Host plant resistance, cultural practices, biological control, chemical control and integrating them at various technological levels have been studied. Sources of host plant resistance have been identified for some of the major insect pests. High yielding mulberry variety has been propagated and their resistances towards major pests have been recorded. Cultural practices like pruning, pollarding, judicious use of nitrogen, optimum spacing and weed management have preyed to be the powerful tools in containing pests. Natural control over the pest population build- up exerted by the wide range of parasitoids, predators and pathogens has been well documented with identification of natural enemies and studies on their potential. Augmentation, through inoculation or inundative releases of parasitic arthropods, is the most direct way of increasing the numbers of these beneficials in sericulture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3121-3126
• /
• 2013

The integrity evaluation of pipes in nuclear power plant are essential for the safety of reactor vessel, and integrity must be assured when flaws are found. Accurate stress intensity analyses and crack growth rate data of surface-cracked components are needed for reliable prediction of their fatigue life and fracture strengths. Fatigue design and life assessment are the essential technologies to design the structures such as pipe, industrial plant equipment and so on. The effect of crack spacing on stress intensity factor K values was studied using three-dimensional finite element method (FEM). For the case of cylinder under internal pressure, a significant increase in K values observed at the deepest point of the surface crack. Also, this paper describes the fatigue analysis for cracked structures submitted to bending loads.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.2
• /
• pp.83-88
• /
• 1979

Competitive relationships between soybean cultivars and weeds were determined at different plant spacings and weed competition times. Soybean yields did not differ significantly between plant spacings. Annual weed competition more signficantly reduced yields and yield components of 'Williams' soybeans than those of 'Dongbuktae' and 'Suweon 83'. 'Suweon 83' and 'Dongbuktae' were more competitive to weeds than 'Williams'.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.117-124
• /
• 2018

Recently, the interest and consumption of mini watermelon (Citrullus lunatus Thunb.) are increasing due to nuclear family and one person household. However, there's no research for mini watermelon. Therefore, the purpose of the study is to develop standard cultivation method of mini watermelon. The test cultivar is 'Minimi', which is a small-sized fruit, the rootstock is 'Bullojangsaeng', which is a cucurbit line. Grafted plants were transplanted on April 5, 2017, and harvested in early July. Cultivated types were 3 methods, which are ${\cap}-form$, arched, and runner type, and plant spacing were 40, 60, and 80 cm, respectively. The rowth and yield in ${\cap}-form$ was higher than that of the arched and runner types, and the sugar content was higher a bit. The yield per unit area was about 50% higher than ${\cap}-form$, which can be plant density cultivation than that of the runner type. The number of seeds per fruit of 'Minimi' was similar to that of 'Sambokggul', but seed weight was one third lower than that of 'Sambokggul'. The content of lycopene was 30% higher than that of 'Sambokggul' watermelon, and the main sugar content is similar to or slightly less. In conclusion, the ${\cap}-form$ staking cultivation was superior to the runner type or arched cultivation in terms of fruit setting ratio, yield and quality.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.89-94
• /
• 2016

This study was conducted to determine the optimum nutrient solution, pH, irrigation interval, light intensity and planting density to growth of common ice plant (Mesembryanthemum crystallinum L.) in a closed-type plant production system. Three-band radiation type fluorescent lamps with a 12-h photoperiod were used. Nutrient film technique systems with three layers were used for the plant growth system. Environmental conditions, such as air temperature, relative humidity and $CO_2$ concentration were controlled by an ON/OFF operation. Treatments were comparison of the nutrient solution of Horticultural Experiment Station in Japan (NHES) and the nutrient solution of Jeju National University (NJNU), pH 6.0 and 7.0, irrigation interval 5 min and 10 min, light intensity 90 and $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and within-row spacing 10 cm, 15 cm, 20 cm and 25 cm with between-row spacing 15 cm. Optimum macronutrients were composed N 7.65, P 0.65, K 4.0, Ca 1.6 and Mg $1.0mM{\cdot}L^{-1}$. There were no significant interactions between pH 6.0 and 7.0 about shoot fresh weight and shoot dry weight of common ice plant. Irrigation interval 5 min and 10 min was also the same result. Shoot fresh weight and shoot dry weight were highest at $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Shoot fresh weight and shoot dry weight were decreased according to increasing the planting density. From the above results, we concluded that optimum nutrient solution, optimum levels of pH, irrigation interval, light intensity and planting density were 6.0-7.0 and 10 min, $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and $15{\times}15cm$, respectively for growth of common ice plant in a closed-type plant production system.