• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 춘계학술대회
• /
• pp.116-116
• /
• 2019

Thalictrum rochebrunianum var. grandisepalum (TRG) is a Korean endemic plant, and it is widely used for edible, medicinal, landscape materials. In this study, we examined the protein and mRNA expression levels of MITF, tyrosinase, TRP-1 and TRP-2 by TRG extract (TRGE) in IBMX-treated melanocytes to evaluate the possibility of using TRG as a whitening material. IBMX were reported as melanin synthesis enhancers. It could increase intracellular melanin synthesis by activation of the microphthalmia-associated transcription factor (MITF) signaling pathway. TRGE did not show cytotoxicity at concentrations below $100{\mu}g/ml$ in B16F10 cells. TREG dose-dependently inhibited protein and mRNA levels of MITF, tyrosinase, TRP-1 and TRP-2. Therefore, we suggest that TRGE is an important natural resource for cosmetic raw materials for whitening function.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4275-4280
• /
• 2011

Present study describes the optimization of disk type sorptive extraction using monolithic material (Mono Trap) for the analysis of volatile aroma compounds from Lantana camara L. in combination with gas chromatography/mass spectrometry (GC/MS). Monolithic material sorptive extraction (MMSE) is a new sampling technique using a monolithic hybrid adsorptive disk (O.D. 10 mm, 1 mm thickness) made of high purity silica and activated carbon having a large surface area chemically bonded with octadecyl silane (ODS). The experimental parameters that may influence the MMSE efficiency have been optimized. Linearity, accuracy, precision and detection limits were evaluated to assess the performance of the proposed method. The method was validated with real plant samples of Lantana camara L. Twenty eight compounds including the main representative compounds of ${\alpha}$-curcumene and ${\beta}$-caryophyllene were found in analyzed samples. Results proved that proposed method could be used as a good alternative for the analysis for such volatile aroma compounds in plant samples.

• Plant Resources
• /
• 제6권3호
• /
• pp.170-174
• /
• 2003

The important component for medical effect in ginseng is ginsenoside. Korea Ginseng & Tobacco Research Institute contains approximately 200 lines produced by inbred selection. It is assumed that ginseng lines containing high level of ginsenoside should be included in those lines. Besides, new breeding methods such as cell line selection in vitro and hairy root were recently developed. Therefore, this study was carried out to detect genes related to ginsenoside, and to use it for selection marker to select and distribute lines containing high level of ginsenoside. DNA was extracted from both ginseng roots and hairy roots, and the difference between the line containing high ginsenoside(KG101) and normal ginsenoside(KG103) were analysed. As a result, 28 out of 36 primers showed bands, and many primers showed band difference between ginseng lines. It is considered that the bands should be analysed using DNA sequence comparison to check if those are related to ginsenoside. In case of hairy roots of ginseng, almost no differences were found between two lines.

• 대한조선학회논문집
• /
• 제55권2호
• /
• pp.124-135
• /
• 2018

In order to secure manufacturing competitiveness of offshore plants, piping process is one of the most important processes. This study is about the design of management system for piping materials manufacturing of the offshore plant. As a result of the study, we analyzed the system and algorithms needed for the processing of piping material products and designed the structure of the entire management system. We conducted a process analysis of the design, manufacturing and installation processes. And also we proposed a system structure to improve the various problems that have come out. We also proposed an algorithm to determine the delivery order of the pipe spools, and proposed a raw material management system for the manufacturing of the pipe spools. And we designed a manufacturing process management system to manage the risk of pipe materials delivery. And finally we proposed a data structure for the installation process management system. The data structures and algorithms were actually implemented, and applied the actual process data to verify the effect of the system.

• 한국의류학회지
• /
• 제32권4호
• /
• pp.598-607
• /
• 2008

Bast fibers were applied for various usages from fabrics to household care products long time ago. In this study, we investigated the physical characteristrus of water retted & chemically rotted fibers of Yucca, New Zealand hemp, Corn, Kuzu vine, Indian mallow, and Mulberry paper that have been harvested by domestic cultivation. Water retting is more effective than chemical rotting for six kinds of plant fibers. When all fibers were rotted chemically with 1% sodium hydroxide, only Kuzu vine and Indian mallow were retted. Indian mallow, Yucca, New Zealand hemp, and Com fibers have higher tensile strength than any other fibers. The crystallinity of Kuzu vine, Indian mallow, Yucca, New Zealand hemp, and Corn was as low as 60% but Yucca, New Zealand hemp were flexible. Yucca had fewer lumina whereas New Zealand hemp more lumina in cross sectional shape. Especially com fibers have a structure like sponge, and Indian mallow had a net shape. The longitudinal section of New Zealand hemp showed smooth and long shape. Mulberry paper was proved to be short and thin, which is quite appropriate for making paper. In this study, we found that plant fibers for living material could be used for cloth materials.

• 한국자원식물학회지
• /
• 제13권1호
• /
• pp.11-17
• /
• 2000

우리 나라의 남부지방에서 고품질의 참당귀를 생산하고자 비가림하우스를 이용하여 차광재배로 하고현상을 방지한 후 멀칭재배을 실시하여 시험을 실시한 결과는 다음과 같다. 1. 멀칭 종류별 토양의 습도와 지온은 무멀칭보다 멀칭재배에서 높았고, 특히 멀칭 중에서도 P. E.(polyethylene) 멀칭이 가장 높았다. 2 잡초의 발생은 멀칭 종류별 검정 P. E. 멀칭재배에서 가장 적게 발생되었고, 투명 P E.멀칭재배에서는 많이 발생 되었다. 3. 생육은 P E. 멀칭재배가 짚멀칭이나 무멀칭보다 엽수가 많고 엽장이 커서 양호하였다. 4. 추대는 2∼5% 정도가 발생되었으며, P. E. 멀칭재배에서 약간 많이 발생되는 경향이었다. 5. 수량은 P E. 멀칭재배가 토양의 물리성이 좋아서 근수가 많고, 근장과 묘두직경이 커서 뿌리 생장이 양호하여 증수되었다. 한편, 검정 P E. 멀칭재배는 잡초 발생의 억제 효과가 뚜렷하여 P E. 멀칭재배시 노동력이 부족할 경우 적극 권장할 만한 멀칭재료로 생각되어진다.

• 한국자원식물학회지
• /
• 제24권5호
• /
• pp.507-513
• /
• 2011

본 연구는 멀칭재료와 재식방법에 따른 shallot의 생육에 미치는 영향을 조사하였다. 멀칭비닐 종류별 시험에서 투명 PE필름 처리구에서 흑색 PE필름보다 엽수, 초장, 엽초장, 엽초경이 더 좋았고, 상품수량도 21%나 증수되었다. 그러나 구의 크기별 분포에서는 유의적인 차이가 없었다. Shallot의 재식밀도별 수량은 120 cm 5조(10 a당 20,833주)에서 1,332 kg으로 120 cm 2조(10 a당 12,500주)에서보다 1.7배가 증수되어 밀식재배가 유리하였다. 따라서 shallot의 재배는 투명 PE필름 멀칭에 휴폭 120 cm에 5조가 좋을 것으로 사료된다.

• 한국해양공학회지
• /
• 제34권4호
• /
• pp.263-271
• /
• 2020

In this study, we performed a three-dimensional (3D) topology optimization of a fixed offshore structure to enhance its structural stiffness. The proposed topology optimization is based on the solid isotropic material with penalization (SIMP) method, where a volume constraint is applied to utilize an equivalent amount of material as that used for the rule-based scantling design. To investigate the effects of the main legs of the fixed offshore structure on its structural stiffness, the leg region is selectively considered in the design domain of the topology optimization problem. The obtained optimal designs and the rule-based scantling design of the structure are manufactured by 3D metal printing technology to experimentally validate the topology optimization. The behaviors under compressive loading of the obtained optimal designs are compared with those of the rule-based scantling design using a universal testing machine (UTM). Based on the structural experiments, we concluded that by employing the topology optimization method, the structural stiffness of the structure was enhanced compared to that of the rule-based scantling design for an equal amount of the fabrication material. Furthermore, by effectively combining the topology optimization and rule-based scantling methods, we succeeded in enhancing the structural stiffness and improving the breaking load of the fixed offshore structure.

• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.13-19
• /
• 2008

In order to predict a remaining life of a plant, it is necessary to select the components that are critical to the plant life. The remaining life of those components shall be evaluated by considering the aging effect of materials used as well as numerous factors. However, when evaluating reliability of nuclear structural components, some problems are quite formidable because of lack of information such as operating history, material property change and uncertainty in damage models. Accordingly, if structural integrity and safety are evaluated by the deterministic fracture mechanics approach, it is expected that the results obtained are too conservative to perform a rational evaluation of plant life. The probabilistic fracture mechanics approaches are regarded as appropriate methods to rationally evaluate the plant life since they can consider various uncertainties such as sizes and shapes of cracks and degradation of material strength due to the aging effects. The objective of this study is to evaluate the structural integrity for a reactor pressure vessel under the small break loss of coolant accident by applying the deterministic and probabilistic fracture mechanics. The deterministic fracture mechanics analysis was performed using the three dimensional finite element model. The probabilistic integrity analysis was based on the Monte Carlo simulation. The selected random variables are the neutron fluence on the vessel inside surface, the content of copper, nickel, and phosphorus in the reactor pressure vessel material, and initial RTNDT.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.537-538
• /
• 2005