• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.199-205
• /
• 2005

In this paper, we introduce IEC 60300(Dependability program management) into urban transit system, and propose effective method to apply IEC 60300 to Subway Corporation. The dependability is the collective term used to describe the availability performance and its influencing factors such as reliability performance, maintainability performance and maintenance support performance. A dependability program covers all phases of a system's life cycle from planning to operation and possibly disposal, and is composed of program elements divided into tasks.

• The Journal of Society for e-Business Studies
• /
• v.2 no.2
• /
• pp.1-30
• /
• 1997

In this research, the concept of CM (configuration management) is introduced for proper applications to the life-cycle product data management. In addition, the activities for CM - CM management and planning, configuration identification, configuration control, configuration status accounting, and configuration verification and audit - are described in detail. For the management of distributed configuration data among governments, prime contractors, and subcontractors, development environments and functions for the configuration management information system (CMIS) are proposed.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.147-150
• /
• 2005

The oh purpose of this study is to provide a basic study for a desirable bathroom planning of the 30s pyung apartments. This study explores the change of the bathroom planning and analyzes the bathroom plans of the existing apartments. The data are 2053 case of the bathroom plan of the 30s pyung apartments constructed in Seoul and the new town between 1971-2004. In this stud, a settlement process and trend of the two bathroom plan in the 30s pyung apartments are examined. The findings were as follows: 1) The introduction of the two bathroom from 1970 to 1980. 2) The introduction of the two bathroom from 1990 to 2000. For the better planning of the bathroom, factors like family size, life cycle, and manner of bathroom use should be analyzed in the future studies. The analysis of the dweller's consciousness, satisfaction, and the demands on the bathroom in 30s pyung apartments, and to give useful information on the bathroom of 30s pyung apartments.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.5
• /
• pp.337-351
• /
• 2016

As technologies' life-cycle shortens and their development directions are uncertain, firms' technology planning capability becomes increasingly important. Prior patent-based studies using technology growth curves identify developmental stages of technologies, thereby formulating technology development directions from an overall perspective. However, a technology generally consists of multiple sub-technologies and accordingly their development stages are likely various. In this regard, the prior studies failed to identify core sub-technologies and their specific development directions. Therefore, we suggest an approach consisting of 1) identifying core sub-technologies of a given technology using patent co-classifications and social network analysis, and 2) identifying each sub-technology's development stage and thereby determining its further development direction. We apply our approach to patents related to augmented reality to examine its applicability. It is expected that our approach will help identify evolving development stages for the core sub-technologies of a given technology, thereby effectively assisting technology experts in technology planning processes.

• Industrial Engineering and Management Systems
• /
• v.14 no.2
• /
• pp.159-174
• /
• 2015

Remanufacturing used, end-of-life products is a complex problem involving multiple types of products that may share common parts. Recovery targets assigned by market demand and environmental legislation add more difficulty to the problem. Manufacturers now need to achieve specified take-back and recovery rates while fulfilling demands for remanufactured products. To assists in the demand- and legislation-driven remanufacturing of a family of products (i.e., multiple products that share common parts), this paper introduces a bi-objective mixed integer linear programming (MILP) model for optimizing remanufacturing. The model identifies optimal remanufacturing plans for a product family, whereby, the remanufacturer can achieve demand and recovery targets more profitably and in an environmentally-friendly manner. The model can also be used to quantify and justify the economic and environmental benefits of a product family from a remanufacturing perspective. A case study is presented for remanufacturing an alternatorfamily of products.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.46-54
• /
• 2018

In the 21st century, the Earth has continued its efforts to reduce carbon emissions to overcome the crisis caused by climate change. The construction industry, which is a representative industry that produces large amounts of the environmental load during construction, should actively reduce the amount of the environmental load. From the planning stage of the construction facility, it is necessary to consider the environmental load such as route selection and structure type selection to reduce the environmental load. However, the environmental load can be estimated based on the input resource amount. However, in the planning stage, it is difficult to accurately calculate the environmental load due to lack of information on the construction amount. The purpose of this study is to select the environmental load factors for IPC girder bridges to be used in the environmental load estimation model in the planning stage. Specific information related to the environmental load was selected from a list of information available in the planning stage, reflecting the Life Cycle Assessment(LCA), correlation, principal components analysis and expert opinion. The list of selected planning stage information is 10 such as span length and bridge extension, and it is expected to be used as a basic data for the future development of environmental load estimation model.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.3
• /
• pp.297-306
• /
• 2021

In this study, basic strategies for the decommissioning and site remediation of the Fukushima Daiichi Nuclear Power Station (FDNPS) were investigated. Six scenarios were formulated based on two of the three decommissioning strategies of nuclear power plants defined by the International Atomic Energy Agency (IAEA): immediate dismantling and deferred dismantling. A multicriteria decision analysis was performed to analyze the preferences of the options from the viewpoints of the timeframe to complete decommissioning, the resulting waste, the site usability, and the availability of the radioactive waste disposal route. The same six scenarios were applied to both the FDNPS and the nuclear power plants that ceased operation after a normal plant life cycle for comparison. For the FDNPS, the decommissioning project involved fuel debris retrieval, dismantling, and site remediation. The analysis results suggest that the balance between the amount of waste and the time to achieve the end state may be one of the most critical factors to consider when planning the decommissioning and site remediation of the FDNPS.

• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.764-767
• /
• 2005

In the construction industry, materials management is one of the most important components in construction engineering life cycle. Materials management optimization is one of the research subjects in the field of construction management. In the materials management system of a construction project, the suitability of selecting procurement planning strategy will influence the result of project completion. This study conducts literature review at first and also refers the related issue in other industry's application. Associated with the characteristics of construction project in civil engineering and the concept of object oriented design applied in the materials management, this research is aimed to establish a construction materials requirement preliminary system.

• Journal of the military operations research society of Korea
• /
• v.24 no.2
• /
• pp.17-29
• /
• 1998

This paper is to aimed to design a model of Korea defense information resource management structure from the viewpoint of system's approach, especially focusing on planning/programming procedures, organizational structure and business process re-engineering. The author analyzed current projects and plans on the field of Korea defense information systems, for finding what kinds of problems and why the problems occurred. The author concluded that many problems came from wrong approach of previous information resource management. Highlights of the proposed model are as follows: 1) Planning and programming structure must be considered as a major information resources and it must be managed as a key role through the whole system life cycle; 2) Organizational structure should be properly set up for managing and implementing information system projects; 3) Business process should also be analyzed thoroughly for re-engineering and innovating current inefficient organizational structure. These three additional viewpoints added to previous model for improving Korea defense information resource management.

• Journal of Environmental Impact Assessment
• /
• v.8 no.1
• /
• pp.141-146
• /
• 1999

This paper proposes the planning and design of the Eco-village centering around Chindo-ri, Muju-kun. The Eco-village project has three basic objects the Eco-village residents' lives adapting to ecological principles such as regeneration and circulation, life agricultural techniques based on organic cycle, and residents' harmonious lives with the surrounding nature. For constructing of the Eco-village, first, the subject area was analyzed in terms of the natural and cultural environment and then, on this analytic ground the concrete concept and the specific plan were set up. The following details also should be considered: the scale of the residential household, the population, the space arrangement of the village, the material cycling structure, the waste treatment, the purification of the sewage, the energy supply, the landscape architecture, the production activity, the conservation of the ecosystem and so on.