• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.497-502
• /
• 2014

In this paper, a design method for a broadband planar dipole antenna for terrestrial digital television (DTV) reception is studied. The dipole is modified to half bow-tie type for size reduction. The balun between feeding microstrip line and coplanar strip (CPS) line is implemented with a rectangular patch inserted along the center of the CPS line. The proposed antenna is the structure of dual resonances, one is due to the dipole and the other is due to the CPS line attached by the balun. The effects of various geometrical parameters on the antenna performance are examined, and the antenna is designed for terrestrial DTV band (470-806 MHz). The prototype antenna is fabricated on an FR4 substrate with a size of $95mm{\times}178mm$, and tested experimentally to verify the results of this study.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.129-136
• /
• 1986

The dipole moments for some coordination compounds with organic ligands have been calculated adopting the molecuar orbitals obtained from EHT calculation with modified technique. Adopting the molecular orbitals with the modified technique, the calculated dipole moments for all the coordination compounds with organic ligands give closer agreements with experimental values than those using the molecular orbitals obtained from EHT calculation. The calculated dipole moments suggest that $(C_2H_5)_2SO,\;(C_6H_5)_2SO,\;and\;(C_6H_5)_2SeO$ may have a trigonal planar structure and $(C_6H_5)_3AsO,\;and\;(C_6H_5)_3PBCl_3$ a square planar structure and $(C_2H_5)_2OZrCl_4$ may be distorted markedly. This work may also indicate that the modified technique is superior to the EHT calculation as far as the dipole moment calculation is concerned.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.2
• /
• pp.32-42
• /
• 1995

When the thickness becomes so small as in the case of the trailing edge of the propeller blade or when the curvature of the surface varies rapidly as in ship stem, the existing panel method employing a flat-surface panel, obtained by collapsing the original non-planar surface into its mean location, suffers the leakage problem and also gives inaccurate induction upon the field point very close to the panel. The hyperboloidal panel deals with the induction from the dipole distributed on the non-planar surface without approximation, overcoming the defects of the flat-surface panel. This paper introduces two distinct derivations of the formulae to compute the integral for the potential induced by a dipole of uniform density distributed on a non-planar hyperboloidal surface element. One method is based on the Gauss-Bonnet theorem and the other is based on the transformation of the surface integral into a line integral.

• Journal of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.59-64
• /
• 1979

The dipole moments for octahedral $[M(II)Cl_2N_2O_2]$, square planar and tetrahedral $[Pd(II)X_2Y_2]$ type complexes are calculated, using the approximate molecular orbital theory [M(II) = Ni(II) or Co(II), X = N and Y = O or S]. The calculated dipole moments for these complexes are in reasonable agreement with the experimental values. The possible structures for these complexes are investigated on the basis of the calculated dipole moments.

• Journal of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.3-13
• /
• 1984

The trans effect of ligands on the calculated dipole moments has been investigated, choosing trans square planar $[Pt(II)Cl(PEt_3)_2X]$ type complexes. The calculated dipole moments decrease in the order H > Me > Ph > Cl which is the same as the order of decreasing the experimental dipole moments. This order is in agreement with the order of decreasing the trans effect as determined by rate of reaction. The calculated dipole moments for cis complexes are markedly higher than those for trans complexes. This is also in agreement with experimental fact. The calculated dipole moments for some of cis complexes are, however, lower than the observed values, which is different from trans complexes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.63-64
• /
• 2013

In this paper, a design method for a dual dipole antenna for an operation in the frequency band of 470-806 MHz for indoor digital TV (DTV) is studied. The proposed antenna is composed of two planar dipoles connected by parallel strip line, and the antenna is fed by a microstrip line. By employing different lengths of dipoles, a broadband characteristics is obtained, and the antenna is size-reduced by bending both ends of the longer dipole. The effects of each parameters on the antenna performance are examined by simulation, and the parameters are optimized for the DTV use. A prototype antenna with optimized parameters for the indoor DTV use is fabricated on an FR4 substrate and tested experimentally. The experimental results show that the frequency band for a VSWR < 2 ranges 458-864 MHz (61.4%, bandwidth 406 MHz, 1.89:1), and it corresponds fairly well with the simulated band 448-868 MHz (63.8%, bandwidth 420 MHz, 1.94:1).

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.171-174
• /
• 2010

In the paper, a printed dual-dipole array antenna is presented. A 4-way planar SIW power divider is adopted for feeding the array antenna. The dual-dipole is adopted as radiation elements which greatly improves the impedance band. The measured bandwidth larger than 31 % for VSWR$\leq$1.5 operating near 14 GHz is achieved and in agreement with the simulated results. The radiation E-plane and H-plane radiation pattern is presented in the paper. The radiation gain is also presented in the paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1459-1467
• /
• 1997

The current on the thin planar structure as an element of the transversely fed electromagnetically coupled(EMC) microstrip dipole array antenna is obtained by using the integral forms of the finite difference time domain(FDTD) method. This method was applied to calculating the optimum current distribution (Doplh-Tchebyscheff distribution) of each dipole element on the feed line as a function of their offset positions for the narrow main beam width and the side beam level below -20 dB. The current on each dipole substitutes for the electric and magnetic current densities on the virtual surface of the FDTD calculation to express the far field intensity, the calculation time and the computer memeory can be reduced to about 80% and 1.3 Mbyte, respectively. The calculated radiation patterns are compared to the measured values and these are in good agreement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.583-585
• /
• 2012

In this paper, we introduce a design method for a broadband planar quasi-Yagi antenna (QYA) for terrestrial digital television (DTV) receiving. The coplanar strip line feeding the driver dipole is connected to a microstrip line and is terminated by short circuit. By appending a wide strip-type director at a location close to the driver dipole, a broadband impedance matching and a gain characteristics in a high frequency region are obtained. The gain characteristics in a low frequency region are improved by adding a reflector formed by a truncated ground plane. To reduce the antenna size, the strip-type dipole and reflector are modified to half bowtie (V)-shaped elements. The effects of various parameters on the antenna characteristics are examined. An antenna, as an design example for the proposed antenna, is designed for the operation in the frequency band of 470-806 MHz for terrestrial DTV. The optimized antenna is fabricated on an FR4 substrate and tested experimentally to verify the results of this study.

• Journal of electromagnetic engineering and science
• /
• v.15 no.4
• /
• pp.245-249
• /
• 2015

In this paper, a low-profile dipole array antenna with monopole-like radiation for on-body communications is proposed. The proposed antenna, operating in the industrial, scientific, and medical (ISM) band, is designed with consideration of the human body effect. By placing eight planar dipole antenna elements symmetrically around the z-axis, the proposed antenna achieves monopole-like radiation characteristics with a low profile. The antenna has overall dimensions of $0.44{\lambda}_0{\times}0.44{\lambda}_0{\times}0.013{\lambda}_0$ at 2.45 GHz in the ISM 2.45 GHz band (2.4-2.485 GHz) and a 10-dB return loss bandwidth of 4.9% ranging from 2.4 to 2.52 GHz.