• 한국재료학회지
• /
• 제3권2호
• /
• pp.197-204
• /
• 1993

Plastic기 복합재료의 파괴거동에 미치는 원공크기오 판폭의 영향을 검토하기 위하여 단축인장시험을 행하였다. 점응력파손조건에서의 특성길이 $d_o$는 원공크기 및 판폭에 의존하며, 이를 기초로 파손강도를 예측하기 위한 수정 점응력 파손조건식을 제안하였다. 이 파손조건의 예측값은 실험값과 잘 일치하였다. 파손 강도는 원공선단의 손상비의 증가에 따라 증가하며, 이는 손상영역의 형성으로 인한 응력완화현상으로 설명되어 진다. 또한 불안정 파괴시의 최대균열길이 $a_c$는 특성길이 $d_o$의 약 2배의 값을 나타낸다. 파괴인성에 대응하는 한계에너지해방율 $G_c$의 변화는 원공선단의 손상영역의 증가에 의한 응력완화가 주요한 원인이라고 할 수 있다.

• 한국의류학회지
• /
• 제27권6호
• /
• pp.715-724
• /
• 2003

The Korean clothing culture has shown rapid changes along with influences of western cultures, with social changes due to the liberation from Japan, the Korean War, and the economic growth concentrated on export since the westernization of Korea had begun. Also clothing materials, as a phase of such culture, have been changed. Among silk fabrics, "Dan (단: damask of satin texture with Korean traditional patterns are inwoven)", which has been concerned one of the most beautiful and precious fabrics due to its complexity and difficulty of processing. Since the beginning of the Era of Enlightenment(Kae-hwa-gi), Dan fabric materials and weaving methods have changed. It seems that the figured texture using the Jacquard loom began in 1936. when the Jacquard machine began to be imported from Japan into Korea. From that time on, new fabric materials, such as yangdan (양단), and popdan (법단), hobakdan (호박단), silk and rayon mixed Dan(교직양단) began to be produced. Before 1950's there were some restrictions about the Number of wefts, so the production of the one colored dan(단색단) was more common than that of the multi colored dan(다색단). But with the spread of 4$\times$4 shuttle box loom (양사정직기), various kinds of the multi colored dan have been produced after 1960's. Around the end of 1980's, automatic shuttle change loom have been generalized and 7 color dan(칠색단), 9 color gumsadan (구색금사단) have been current in multi colored dan. In terms of materials, synthetic and chemical textiles had been used widely and alter 1980's most fabrics, of which the ground weave is not being woven with satin-weave but being woven with plain or twill-weave, are named Dan in general.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.295-304
• /
• 2006

High-bulk worsted yams with different shrinkable and non-shrinkable acrylic fibers blend ratios are produced and then single jersey weft knitted fabrics with three different structures and loop lengths are constructed. The physical properties of produced yams and compression properties of produced fabrics at eight pressure values (50, 100, 200, 500, 1000, 1500 and $2000 g/cm^2$) were measured using a conventional fabric thickness tester. Then, weft-knitted fabric compression behavior was analyzed using a two parameters model. It is found that at 40 % shrinkable fibre blending ratio the maximum yam bulk, shrinkage, abrasion resistance and minimum yarn strength are obtained. It is also shown that high-bulk acrylic yarn has the highest elongation at 20 % shrinkable fibre blend ratio. The statistical regression analysis revealed that the compression behavior of acrylic weft-knitted fabrics is highly closed to two parameter model proposed for woven fabrics. It is also shown that for weft-knitted structure, there is an incompressible layer (V') which resists against high compression load. Acrylic weft-knitted fabrics with knit-tuck structure exhibit higher compression rigidity and lower softness than the plain and knit-miss structures. In addition, at 20 % shrinkable fibre blend ratio, the high-bulk acrylic weft-knitted fabrics are highly compressible.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.573-580
• /
• 2005

Model I interlaminar fracture behaviors of the carbon/epoxy composite, one of the candidate composites for a tilting train carbody, were investigate by the use of DCB(Double cantilever beam) specimens. These specimens were made of CF3327 plain woven fabric with epoxy resin, and an artificial starter delamination was fabricated by inserting Teflon film with the thickness of $12.5{\mu}m$ of $25.0{\mu}m$ at the one end of the specimen. Mode I interlaminar fracture toughness was evaluated for the specimens with the different thickness of an inserter. Also delamination propagating behaviors and interlaminar fracture surface were examined through an ooptical travelling scope and a scanning electron microscope. We found that abruptly unstable crack propagation called as stick-slip phenomena was observed. In addition, interlaminar fracture behaviors were affected on the location and the morphology of a crack tip as well as an interface region.

• 한국의상디자인학회지
• /
• 제13권2호
• /
• pp.163-173
• /
• 2011

The objective of this study is to examine the current status of manufacturing formal knit jackets for middle-aged women. Fifteen manufacturers specializing in formal knitwear brands were chosen as the study subjects, and interviews and questionnaires were used with patterners and designers. The questionnaire was composed of 27 items and began with general questions, such as how the jackets were manufactured. Specific questions, such as materials and sewing method, were also considered further on. The results are as follows: First, as for the structure of the knit jacket manufacturer, seven out of fifteen manufacturers directly manufactured knit jackets in their own factory, while the manufacturing was comprised of 20% woven jackets and 80% knit jackets for all manufactures. Second, as for the type of yarn mostly used in knitting the fabric for the jackets, satin yarn and wool were used mostly for F/W with Plain and Half Milano rib stitches as the type of knit with a gauge of 12G and 7G. Third, as for the margin between the product size of the target brand and the size of the body at the time of designing a knit jacket pattern, the investigation of the actual state of manufacturing showed that the margin at the bust was B+4.8cm, the waist was W+6.9cm, and the hip girth was H+5cm. Therefore, the bust and hip girth of the knit jackets were designed to be smaller than those of the bust and hip girth lines of non-flexible woven jackets. On the contrary, the waist measurement of non-flexible woven jacket was designed to be smaller than the knit jacket. It was found that the side line of the knit jacket was expressed with greater give as compared to that of the non-flexible woven jacket.

• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.717-723
• /
• 2010

많은 연구자들이 평직 탄소섬유강화플라스틱에 대해서 연구해왔지만 피로 균열 진전에 관한 연구는 아직도 미지한 상태이다. 그리고 하중과 섬유 배열 각도에 따라 균열 진전 양상이 다름을 알 수 있다. 본 연구에서는 서로 다른 두 개의 섬유 배열각도($0^{\circ}$, $45^{\circ}$)에서 평직 탄소섬유강화플라스틱의 피로 균열 진전에 대해 연구하였다. 평직 탄소섬유강화플라스틱의 피로 균열 진전 테스를 하중비 0.1에 10Hz로 수행하였다. 그 시험 결과로써, 피로 균열 진전 속도(da/dN)와 에너지해방률(${\Delta}G$)과의 그래프를 도출하였고, 섬유 배열 각도에 따른 균열 진전 양상을 $0^{\circ}$의 경우에는 Mode I를 적용하였고, $45^{\circ}$의 경우에는 Mixed Mode를 적용하였다.

• 대한가정학회지
• /
• 제12권1호
• /
• pp.459-471
• /
• 1974

This study was carried out on the thermal transmission on account of variation of weaves and researched on the selection of the most suitable weaves for warmth. Also the interrelation among the density, thickness and thermal transmission by different weaves was studied, the author has woven three fundamental weaves, five weaves derived from the fundamental weaves and two special weaves for the purpose of experiment. In weaving of fabrics for experiments the lever type hand loom was used. Testing of texture was carried out according to KS and ASTM. The thermal transmission was also tested by as cooling method which were developed by the author. The conclusions of experiments were as follows. 1. Matt weaves, honey comb weaves and satin weaves having long floating yarns have large cover factor and were thicker. these structures of the weaves were good in warmth. 2. Thermal transmission was reciprocated to the cover factor, thickness and value of cover factor multiplied by thickness : It was found that the weaves of woven fabrics for warmth had better use of satin weaves, Matt weaves, Granite weaves and Honey comb weaves. In the time of warmth is not the first purpose, had better use of Rib weaves. Plain weaves and Twill weaves with thin thickness and high thermal transmission.

• 복식
• /
• 제64권5호
• /
• pp.141-153
• /
• 2014

Buddhist articles from various periods in the Vairochana Buddha statues, which are currently housed in the Haeinsa Temple's Supreme Buddha Hall and Beopbojeon Hall. This research concentrates on the artifacts found inside the storage boxes, which was placed inside the Buddha statues in 1490. A total of 24 pieces of fabric articles found inside the Virochana Buddha in Beopbojeon and 213 pieces from the Supreme Buddha Hall were examined. The types of textiles are as follows: bast fiber, silk, cotton, and union cloth. Bast fiber consisted of ramie and hemp. For silk, tabby woven with plain weave, spun silk, and thin tabby were found. And twill damask made with twill, Sa and Ra with the leno weave, and satin damask made with the satin weave were also found. Also the two Jeogoris and three Jogakbos were found, the one Jeogori was made with Hwan. The Buddhist articles in the Vairochana Buddha of Haeinsa have been preserved well and its colors have remained virtually the same from the time of its original placement. Therefore these articles are very important in understanding the textile characteristics, weaving techniques, dying techniques as well as traditional colors.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.384-387
• /
• 2002

In the resin transfer molding, there are many advantages such as high volume, high performance, and low cost, The permeability is essential in the design and operation of the process, Traditionally, the determination of permeability can be divided as three methods, which are experimental measurement, analytical, and numerical prediction using the Darcy's law. In this study, the permeability in the microscopic level is first computed on the square-packing and hexagonal packing structures of the filaments inside the yarn by using CVFEM. (omitted)

• 한국의상디자인학회지
• /
• 제5권3호
• /
• pp.89-97
• /
• 2003

This study is to review the development of calico printing pattern design for fabric through historical perspective. Calico is a cotton cloth named from Calicut, a city of India. It was first brought to England by the East India company in 1621. Although the name is generally given and plain white cotton cloth, and in America it is applied to small-scale printed cottons, today it applies to indian cotton cloth, coarse or fine, woven with colored geometrical large-scale and small-scale patterns, painted or printed. Therefore this paper proposes the classification and feature extraction of calico printing pattern from the early of 16th century to 21th century. The results of this study can be effectively applied to develop competitive calico pattern design in domestic cotton textile industry.