• Geomechanics and Engineering
• /
• v.24 no.6
• /
• pp.589-597
• /
• 2021

The present study evaluates geocell reinforced slope behavior. A three dimensional analysis is carried out to simulate soil and geocell elastoplastic behavior using the finite difference software FLAC3D. In order to investigate the geocell reinforcement effect, the geocell aperture size, thickness, geocell placement condition and soil compaction had been considered as variable parameters. Moreover, a comparison is evaluated between geocell reinforcing system and conventional planar reinforcement. The obtained results showed that the pocket size, thickness and soil compaction have considerable influence on the geocell reinforcement slope performance. Moreover, it was found that the critical sliding surface was bounded by the first geocell reinforcement and the slope stability increases, by increasing the vertical space between geocell layers. In addition, the comparison between geocell and geogrid reinforcement indicates the efficiency of using cellular honeycomb geosynthetic reinforcement.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.687-696
• /
• 2023

In recent construction sites, digital maps obtained through drone photogrammetry have garnered increasing attention as indispensable tools for effective construction site management. the strategic placement of Ground Control Points (GCPs) is crucial in drone photogrammetry. Nevertheless, the manual labor and time-intensive nature of GCP surveying pose significant challenges. The purpose of this study is to design the concept of automated GCPs survey technology for enhancing drone photogrammetry efficiency in construction sites. As a result, the productivity of the automated method was analyzed as 118,894.7㎡/hr. It is over 25% productivity improvement compared to traditional methods. In future studies, economic analysis of automated methods should be studied.

• Composites Research
• /
• v.31 no.3
• /
• pp.83-87
• /
• 2018

An object in the Low Earth Orbit (LEO) is affected by many environmental conditions unlike earth's surface such as, Atomic oxygen (AO), Ultraviolet Radiation (UV), thermal cycling, High Vacuum and Micrometeoroids and Orbital Debris (MMOD) impacts. The effect of all these parameters have to be carefully considered when designing a space structure, as it could be very critical for a space mission. Polybenzimidazole (PBI) is a high performance thermoplastic polymer that could be a suitable material for space missions because of its excellent resistance to these environmental factors. A thin coating of PBI polymer on the carbon epoxy composite laminate (referred as CFRP) was found to improve the energy absorption capability of the laminate in event of a hypervelocity impact. However, the overall efficiency of the shield also depends on other factors like placement and orientation of the laminates, standoff distances and the number of shielding layers. This paper studies the effectiveness of using a PBI coating on the front bumper in a multi-shock shield design for enhanced hypervelocity impact resistance. A thin PBI coating of 43 micron was observed to improve the shielding efficiency of the CFRP laminate by 22.06% when exposed to LEO environment conditions in a simulation chamber. To study the effectiveness of PBI coating in a hypervelocity impact situation, experiments were conducted on the CFRP and the PBI coated CFRP laminates with projectile velocities between 2.2 to 3.2 km/s. It was observed that the mass loss of the CFRP laminates decreased 7% when coated by a thin layer of PBI. However, the study of mass loss and damage area on a witness plate showed CFRP case to have better shielding efficiency than PBI coated CFRP laminate case. Therefore, it is recommended that PBI coating on the front bumper is not so effective in improving the overall hypervelocity impact resistance of the space structure.

• Fire Science and Engineering
• /
• v.30 no.1
• /
• pp.121-129
• /
• 2016

Ambulances are an important element of pre-hospital emergency medical services, and also an important space for improving the work efficiency of paramedics. Paramedics use the interior environment to maximize the capabilities of the space, but ambulances need to be improved to help with the responsibilities of paramedics. A Seamless space was constructed in accordance with the placement of first-aid emergency medical equipment and drugs, and a patient room was loaded in the interior space of an ambulance. This study was to improve the treatment space of an ambulance to improve the efficiency of work by paramedics The new design provides safety and efficiency for emergency medical services through planning of interior storage suitable for the duties of paramedics and through identification and analysis of the problems in the environment.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.6
• /
• pp.351-360
• /
• 2021

PURPOSE. The aim of this study was to evaluate the efficiency of occlusal and interproximal adjustments of single implant crowns (SIC), comparing a digital cast-free approach (CF) and a protocol using 3D printed casts (PC). MATERIALS AND METHODS. A titanium implant was inserted at position of lower right first molar in a typodont. The implant position was scanned using an intraoral scanner and SICs were fabricated accordingly. Ten crowns (CF; n = 10) were subject to a digital cast-free workflow without any labside occlusal and interproximal modifications. Ten other identical crowns (PC) were adjusted to 3D printed casts before delivery. All crowns were then adapted to the testing model, simulating chair-side adjustments during clinical placement. Adjustment time, quantity of adjustments, and contact relationship were assessed. Data were analyzed using SPSS software (P < .05). RESULTS. Median and interquartile range (IQR) of clinical adjustment time was 02:44 (IQR 00:45) minutes in group CF and 01:46 (IQR 00:21) minutes in group PC. Laboratory and clinical adjustment time in group PC was 04:25 (IQR 00:59) minutes in total. Mean and standard deviation (±SD) of root mean squared error (RMSE) of quantity of clinical adjustments was 45 ± 7 ㎛ in group CF and 34 ± 6 ㎛ in group PC. RMSE of total adjustments was 61 ± 11 ㎛ in group PC. Quality of occlusal contacts was better in group CF. CONCLUSION. Time effort for clinical adjustments was higher in the cast-free protocol, whereas quantity of modifications was lower, and the occlusal contact relationship was found more favourable.

• Particle and aerosol research
• /
• v.19 no.2
• /
• pp.21-30
• /
• 2023

Solar cells, converting abundant solar energy into electrical energy, are considered crucial for sustainable energy generation. Recent advancements focus on nanoparticle-enhanced solar cells to overcome limitations and improve efficiency. These cells offer two potential efficiency enhancements. Firstly, plasmonic effects through nanoparticles can improve optical performance by enhancing absorption. Secondly, nanoparticles can improve charge transport and reduce recombination losses, enhancing electrical performance. However, factors like nanoparticle size, placement, and solar cell structure influence the overall performance. This study evaluates the performance of silver nanoparticles incorporated in a p-i-n structure of perovskite solar cells, generated via aerosol state by the evaporation and condensation system. The silver nanoparticles deposited between the hole transport layer and transparent electrode form nanoparticle embedded transport layer (NETL). The evaluation of the optoelectronic properties of perovskite devices using NETL demonstrates their potential for improving efficiency. The findings highlight the possibility of nanoparticle incorporation in perovskite solar cells, providing insights for sustainable energy generation.

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.907-917
• /
• 2016

This study aimed at improving the method of oil cake application in maize. The experiment was conducted during 2 years at NAS (National Institute of Agricultural Sciences) experimental field, located in Wanju-kun, Jeollabuk-do. Growth factors and nutrient use efficiency were evaluated depending on oil cake application depth, placement, and application rate. Difference in oil cake application method and depth was tested in 2012 and different placements of oil cake application were compared in 2013. Plant height, SPAD value, and dry weight of stem and corn were investigated. SPAD value, dry weight of stem and corn were significantly higher in oil cake banding treatment (OB5, 5 cm depth) as compared to others application methods, i.e. spreading (OS0), deep banding (OB10) and banding + spreading (OB5S). In addition, dry weight of stem and corn of banding treatments (OBL, OBLL) on rhizosphere and in between row (OBR) were higher than spreading treatment (OSP). Furthermore, in case of reduced application rate in additional fertilization did not decrease dry weight of corn and increased nutrient use efficiency. Therefore, it is concluded that banding application in 5 cm-depth and rhizosphere can improve growth and nutrient use efficiency in maize production.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.61-70
• /
• 2020

In this study, the IOT-based desk layout method was proposed to complement the existing seating method and to improve the work efficiency. The IoT system for the desk layout needs determining the function, type and network protocol of the sensor to find out the working status of the desk to reasonably assist the worker's seat placement. A collection method was proposed. The algorithm used in Block Stacking was used when deciding how to allocate seats using the acquired data. As a result, we could suggest an arithmetic basis for rational desk layout in IoT environment and show that it can be applied to an advanced flexible seating system based on working type in addition to the preferences of employees in the future.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.9 no.3
• /
• pp.49-58
• /
• 2010

The Ministry of educational science and technology is about to conduct its 7th &8th curriculum. However, there are some problems in achieving its goals under the current class model system in both educational and architectural. This study finds the characteristics of the arrangements and architectural planning in the departmental system - designed high schools. As a result, the arrangement was tend to be 'overall type' or 'central type' depending on the teaching-learning efficiency. Liberal arts and science&technology groups were placed close, and foreign languages and general cultural studies were arranged close as well. Importantly, there were supporting facilities such as a gymnasium, a cafeteria, a library, a computer lab, and an all-purpose-room, and this arrangement provided convenience. It is for the better learning effect and the high efficiency. It is worthy noticing that the placement and formation of individual or study space is regarded importantly. In flow planning, it seemed that it was designed to reduce the users' movement to a minimum. However, there are still some problems compared to Japan or the States, who already has an established departmental system. I think that the government should enforce its necessity of planning to schools, relevant divisions, or architects to bring it up. Furthermore, it is urgently needed a practical and future-oriented study that can forecast any changes in architectural spaces within the ever-changing teaching and learning environment in the information-oriented society.

• Korean Journal of Community Nutrition
• /
• v.16 no.1
• /
• pp.98-112
• /
• 2011

This study aimed to suggest a 1300 scale of a middle school foodservice facility floor plan which was compliant to the principle of HACCP, as well as ensuring food and work safety, and the flow of personnel and food materials. which consisted of 46 nutrition teachers and 6 experts, responded with a questionnaire on the relationship of functional area and space. Using their opinions, key principles for the design of the facility were single direction movement of food materials, customers and workers; minimization of the cross-contamination through the separation of functional space; and securement of customer-focused efficiency; staff-centered convenience and efficiency; and work and food safety. After the completion of an adjacency diagram, bubble diagram and program statement, the functional areas of a 1300 scale middle school food-service facility were allocated as follows: $9.9\;m^2$ for the receiving area, $56.1\;m^2$ for the pre-preparation area, $10.5\;m^2$ for the food storage area, $6.0\;m^2$ for the supplies storage area, $97.8\;m^2$ for the cooking area, $33.6\;m^2$ for the service area, $52.5\;m^2$ for dish washing area, cafeteria $410.5\;m^2$, $4.5\;m^2$ for the front room, for a total of $725.8\;m^2$. Expert groups have pointed to limitations within this model as there are no windows in the office for the influx of fresh outside air and a need for the straight line installation of steam-jacket and frying kettles on the sides of windows. This study can be useful as the guidelines for estimating the investment cost of the facility and placing the placement of functional areas and equipment in the renovation of the facility. It can be also useful data for a methodology of foodservice facility design.