• Journal of Advanced Marine Engineering and Technology
• /
• 제22권3호
• /
• pp.337-342
• /
• 1998

In this paper the lubrication performances of line pivoted pad thrust bearing and point pivoted pad thrust bearing are studied by a numerical analysis. The running characteristic parameters such as nondimensional load carrying capacity nondimensional friciton power loss nondimensional flow rate and film thickness ratios are calculated for various circumferential pivot positions. The results provide a usdful data for the selection of pivot position in a pivoted and thrust bearing.

• Journal of Oral Medicine and Pain
• /
• 제20권1호
• /
• pp.159-169
• /
• 1995

The purpose of this study was investigating the effects of pivot splint on width of the temporomandibular joint space in order to get the basic data for clinical applications. Pivot splint could be used for treating the patients with temporomandibular disorders, especially for chronic closed lock which would not be reduced by joint manipulation or with other methods. So it is necessary to have a lot of underlying data for using pivot splint, but there is few available reports related to mechanical principle or clinical results of the splint. Healthy twenty dental students wee collected for this study and pivot splint with 2.5mm high right-side pivot was used. Next, transcanial projection was taken and width of joint space at there mandibular positions were measured : habitual occlusion position, clenching position with splint, and clenching position with splint and mandibular force. The data were processed with SAS statistical program. The obtained results were as follows : 1. Ipsilateral posterior joint space width was increased on clenching the pivot splint, but joint space widths of contralateral side were not significantly changed. 2. Superior and posterior joint space width were increased on clenching the pivot splint with mandibualr force on both ipsilateral and contralateral side. 3. Ipsilateral joint space widths were not significantly changed from habitual occlusion position to clenching the pivot splint with active mandibular force, but in case of with passive mandibular force, posterior joint space width was significantly increased. 4. Correlationships between mandibular positions were more significant at anterior joint space than at superior or posterior joint space. But the correlation between clenching and clenching with mandibular force was significant at all the three joint space.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.993-993
• /
• 2014

Increasing the density magnetic recording of a hard disk drive needs to improve position control of a slider. We have troubles analyzing position of a slider by nonlinear property of pivot ball bearing. Many researches analyze a hard disk drive to change pivot ball bearing part from balls to springs. Pivot ball bearing operates by rotation and movement of balls. This study considers Hertzian contact force when balls contact with outer race to analyze nonlinear movement of a ball bearing. Experiment of this study measures movement of a circular center of a pivot ball bearing. We also verify the simulation results and the experiment results.

• 한국추진공학회지
• /
• 제13권4호
• /
• pp.30-35
• /
• 2009

추진기관의 추력 방향을 조절하기 위해 널리 적용되고 있는 flexible seal 노즐에서, 노즐의 회전 중심인 유효 피봇의 위치 변화가 노즐의 구동성능에 미치는 영향을 컴퓨터를 이용한 수치실험으로 분석하였다. 실험 조건은 two-level factorial design ($2^3$-Design)의 실험계획으로 결정하고, 실험은 범용 동력학 해석 프로그램인 ADAMS를 적용하였다. 해석결과, 유효 피봇의 반경 방향 위치 변화가 축 방향 위치 변화보다 구동성능에 미치는 영향이 컸으며, 유효 피봇의 위치 변화가 구동 성능에 미치는 영향은 구동방식에 크게 영향을 받음을 확인하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.91-100
• /
• 1997

In this paper the linearzed stiffness and damping coefficients of tilting pad thrust bearing are calculated by the perturbation method. The coefficients are obtained for a wide range of pivot positions. The effects of exciting frequency and pad mass on stiffness and damping coefficients are investigated. Critical frequencies due to the tilting motions of the pad are presented and are shown to be strongly influenced by the pivot position and pad mass.

• Tribology and Lubricants
• /
• 제13권3호
• /
• pp.33-41
• /
• 1997

In this paper the linearized stiffness and damping coefficients of tilting pad thrust bearing are calculated by the perturbation method. The coefficients are obtained for a wide range of pivot positions. The effects of exciting frequency and pad mass on stiffness and damping coefficients are investigated. Critical frequencies due to the tilting motions of the pad are presented and are shown to be strongly influenced by the pivot position and the pad mass.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.224-230
• /
• 2001

A numerical analysis for the gas lubricated flexure-pivot tilting pad journal bearing has been accomplished. The film pressure are obtained by Newton-Raphson method and the dynamic coefficients are evaluated by the pad assembly method. The effects of the pivot position of the pad on the static and dynamic characteristics are presented for three pads journal bearing with LBP. The optimum pivot positions for the static performance is different from that of the dynamic performance.

• Earthquakes and Structures
• /
• 제12권4호
• /
• pp.425-436
• /
• 2017

Vibration control using a tuned mass damper (TMD) is an effective technique that has been verified using analytical methods and experiments. It has been applied in mechanical, automotive, and structural applications. However, the damping of a TMD cannot be adjusted in real time. An excessive mass damper stroke may be introduced when the mass damper is subjected to a seismic excitation whose frequency content is within its operation range. The semi-active tuned mass damper (SATMD) has been proposed to solve this problem. The parameters of an SATMD can be adjusted in real time based on the measured structural responses and an appropriate control law. In this study, a stiffness-controllable TMD, called a leverage-type stiffness-controllable mass damper (LSCMD), is proposed and fabricated to verify its feasibility. The LSCMD contains a simple leverage mechanism and its stiffness can be altered by adjusting the pivot position. To determine the pivot position of the LSCMD in real time, a discrete-time direct output-feedback active control law that considers delay time is implemented. Moreover, an identification test for the transfer function of the pivot driving and control systems is proposed. The identification results demonstrate the target displacement can be achieved by the pivot displacement in 0-2 Hz range and the control delay time is about 0.1 s. A shaking-table test has been conducted to verify the theory and feasibility of the LSCMD. The comparisons of experimental and theoretical results of the LSCMD system show good consistency. It is shown that dynamic behavior of the LSCMD can be simulated correctly by the theoretical model and that the stiffness can be properly adjusted by the pivot position. Comparisons of experimental results of the LSCMD and passive TMD show the LSCMD with less demand on the mass damper stroke than that for the passive TMD.

• BMB Reports
• /
• 제49권3호
• /
• pp.135-136
• /
• 2016

Small interfering RNAs (siRNAs) have been developed to intentionally repress a specific gene expression by directing RNA-induced silencing complex (RISC), mimicking the endogenous gene silencer, microRNAs (miRNAs). Although siRNA is designed to be perfectly complementary to an intended target mRNA, it also suppresses hundreds of off-targets by the way that miRNAs recognize targets. Until now, there is no efficient way to avoid such off-target repression, although the mode of miRNA-like interaction has been proposed. Rationally based on the model called "transitional nucleation" which pre-requires base-pairs from position 2 to the pivot (position 6) with targets, we developed a simple chemical modification which completely eliminates miRNA-like off-target repression (0%), achieved by substituting a nucleotide in pivot with abasic spacers (dSpacer or C3 spacer), which potentially destabilize the transitional nucleation. Furthermore, by alleviating steric hindrance in the complex with Argonaute (Ago), abasic pivot substitution also preserves near-perfect on-target activity (∼80-100%). Abasic pivot substitution offers a general means of harnessing target specificity of siRNAs to experimental and clinical applications where misleading and deleterious phenotypes from off-target repression must be considered.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.167-174
• /
• 2010

본 논문에서는 사무용 의자의 틸트 동작시 요추지지 기능과 등의 미끄럼을 평가함으로써 등판 회전중심의 최적 위치를 연구하였다. 이를 위해 인체와 의자로 이루어진 수학적 모델을 이용하여 틸트 동작 시뮬레이션을 수행하였다. 착석된 인체 모델의 측면 상에서 고관절 중심을 포함한 42개의 위치에 등판 회전축 위치를 설정하고 각각 시뮬레이션을 수행하였다. 또한 등판의 회전중심이 고관절에 위치한 의자 시작품과 좌판하부에 위치한 기존의 의자에 대해 동작분석 실험도 함께 수행하였다. 시뮬레이션 결과 등판의 회전중심이 고관절 중심에 가까이 위치할수록 틸트시 요추각도 변화량과 등의 미끄럼거리는 작아졌다. 한편 실험결과 착석자의 등과 등판사이의 이격변위와 미끄럼변위는 등판의 회전중심이 고관절 위치에 설계된 시작품에서 더 작게 측정되었다. 시뮬레이션과 실험결과로부터 등판의 회전중심이 인체의 고관절 위치에 가깝게 설계되면 틸트시 착석자의 요추를 효과적으로 지지해 줄 수 있음을 알 수 있었고 이때 착석자는 보다 편안하고 건강한 착석자세를 유지할 수 있다. 이 결과는 사무용 의자에서 등판 회전축 위치의 인간공학적 설계를 위한 가이드라인을 제공한다.