• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.315-323
• /
• 2016

This paper deals with experimental investigation of active flow control via synthetic jets using an unmanned combat air vehicle (UCAV) planform. Fourteen arrays of synthetic jets, mounted along both leading edges, were fully or partially activated to increase aerodynamic efficiency and reduce pitch-up moment. The measurements were carried out using a six-component external balance, a pressure scanner, and tuft flow visualization. It was observed that aerodynamic efficiency (L/D) and pitching moment were clearly affected by the location of jets. In particular, inboard and outboard actuation could effectively increase L/D. Moreover, inboard actuation showed a reduction in the pitch-up, even more than that generated by the full actuation. These results suggest that inboard actuation not only effectively increases L/D but also reduces the pitch-up using only a few actuators.

• 한국항공우주학회지
• /
• 제33권9호
• /
• pp.73-80
• /
• 2005

본 논문은 피치 바이어스 모멘텀 방식을 사용하는 HAUSAT-2 위성의 모멘텀 휠 초기구동(Start-up)을 위한 방안을 연구 분석하고 초소형위성 HAUSAT-2에 적합한 새로운 초기구동 방법을 제안하였다. HAUSAT-2는 25kg급의 나노 위성으로 모멘텀 휠과 마그네틱 토커를 사용하여 3축 제어를 수행한다. 자세제어를 위해 모멘텀 휠은 공칭 속도로 회전하거나 회전속도가 변하게 된다. 모멘텀 휠을 장착한 위성에서 휠의 초기구동방법은 휠을 발사 전에 미리 일정한 속도로 회전하게 하거나, 궤도상에서 추력기와 같은 구동기로 자세를 안정화 시킨 이후에 휠을 공칭속도에 도달하게 하는 방법이 있다. 하지만 HAUSAT-2와 같은 초소형위성의 경우 전력제한으로 발사 전 휠을 구동하기 힘들며, 궤도상에서 자세 안정화 이후 휠을 구동하기 위해서는 자기토커만으로 자세를 안정화 해야 하는데 이 경우 시간이 오래 걸리는 단점이 있다. 따라서 본 논문에서는 좀더 빠르고 효율적으로 휠의 초기구동과 자세안정화를 하기 위해서 모멘텀 휠 구동 방안을 제안하였다. 이 방법은 위성이 발사체에서 분리된 후 초기 각속도 제어를 할 때 일정한 속도 증가율로 모멘텀 휠의 속도를 올려주어 공칭 속도에 도달하게 하며, 이 후 자세 안정화를 수행하게 된다. 이 방식을 사용하면 약 4 궤도 이내에 휠 초기구동과 자세 안정화를 성공적으로 이룰 수 있음을 확인 할 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제17권8호
• /
• pp.1234-1245
• /
• 2003

An experimental study was carried out to investigate the reduced frequency effect on the near-wake of an elliptic airfoil oscillating in pitch. The airfoil was sinusoidally pitched around the center of the chord between -5$^{\circ}$and ＋25$^{\circ}$angles of attack at an airspeed of 3.4 m/s. The chord Reynolds number and reduced frequencies were 3.3 ${\times}$10$^4$, and 0.1, 0.7, respectively Phase-averaged axial velocity and turbulent intensity profiles are presented to show the reduced frequency effects on the near-wake behind the airfoil oscillating In pitch. Axial velocity defects in the near-wake region have a tendency to increase in response to a reduced frequency during pitch up motion, whereas it tends to decrease during pitch down motion at a positive angle of attack. Turbulent intensity at positive angles of attack during the pitch up motion decreased in response to a reduced frequency, whereas turbulent intensity during the pitch down motion varies considerably with downstream stations. Although the true instantaneous angle of attack compensated for a phase-lag is large, the wake thickness of an oscillating airfoil is not always large because of laminar or turbulent separation.

• 설비공학논문집
• /
• 제25권1호
• /
• pp.43-48
• /
• 2013

In this study, the performance of an impeller according to blade length and pitch angle was studied experimentally by building a variable pitch impeller while changing blade length to review the effect of blade length and pitch angle on a fan's performance. The pitch angle was changed in six steps from $20^{\circ}{\sim}45^{\circ}$ at intervals of $5^{\circ}$ while the blade lengths were changed to 90 mm, 100 mm, 110 mm and 120 mm with an identical airfoil shape while carrying out the experiment. The results are summarized as follows: The air flow per static pressure of axial fans increased linearly with increase of pitch angle, but the high static pressure showed a decrease at a pitch angle of $35^{\circ}$. The shaft power increased proportionally to the pitch angle at all blade lengths; the larger the pitch angle, the larger the measured increase of shaft power. This is because the drag at the fan's front increases with the pitch angle. In the axial fans considered in this research, the flow and increase of static pressure amount increased up to a pitch angle of $30^{\circ}$ but decreased rapidly above $35^{\circ}$.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.311-312
• /
• 2012

Blade pitch control system monitors and adjusts angle of the blades and controls rotation speed of blades. This paper shows 2MW pitch system hardware and electric part. Blade pitch system consists of pitch drive, gear box, motor and energy storage. Fieldbus is base on CANopen protocol. Fail-Safe system moves the blades to a safety position in case of any fault condition. The super capacitor energy storage provides emergency back up to the Pitch servo driver during feathering the blades. This paper studied Blade pitch servo driver and a bi-directional DC-DC converter for fail-safe system.

• Journal of the Korean Wood Science and Technology
• /
• 제16권4호
• /
• pp.40-47
• /
• 1988

Our plywood manufacturing industries which entertained prosperous stage in late 1970's have come to be in face of the problems of conceedingly obtaining good quality logs and yield up-grading, which is considered by future-replaceable forest resources. In view of this point, manufacturing characteristic on softwood plywood using Japanese larch, pitch pine as domestic plantation species, and western hemlock as foreign species was studied. In this study, veneer- and plywood manufacturing yields were discussed in relation to log properties and veneer defects (knots). The summarized conclusions were as follows: 1. The majority of sample logs belonged to second grade on the standard. And, eccentricity of larch was the highest 11%, about 2 times those of pitch pine, hemlock. 2. Knot frequency of occurrence of larch reached 19% within log height 8m, and pitch pine 13% within 4m. Correspondingly, the log height of larch available for plywood manufacture was higher by about 2 times that of pitch pine. 3. In the knot types, most of knots of larch appeared dead, whereas those of pitch pine and hemlock appeared live. In size of knots, larch and hemlock showed relatively small 1-2cm dia. by 70% or more and pitch pine did the larger 24cm by 65%. Generally the more knot emerged in the inner side of veneer than the outer. 4. Plywood manufacturing yields by peeling with spindle revolution lathe were 37% in larch > 32% in hemlock> 26% in pitch pine. S. Jointed core veneer yields by peeling with outer perimeter back-up lathe were 55% in hemlock> 53% in larch> and 48% in pitch pine.

• Carbon letters
• /
• 제25권
• /
• pp.89-94
• /
• 2018

In this study, we tried to prepare an isotropic spinnable pitch which can be useful to prepare the general purpose carbon fiber through the co-carbonization of biomass tar with ethylene bottom oil under two different preparation methods (atmospheric distillation, pressurized distillation). The results showed that the ethylene bottom oil added co-carbonization was very effective to decrease of the oxygen contents for obtaining a stable spinnable pitch. The pressurized distillation was more effective to reduce the oxygen functional groups of pitches than atmospheric distillation. The obtained spinnable pitch by the pressurized distillation showed higher pitch yield of 42% and lower oxygen content of 9.12% than the spinnable pitch by the atmospheric distillation. The carbon fiber derived from the pressurized distillation spinnable pitch by carbonization at $800^{\circ}C$ for 5 min showed that the higher tensile strength of carbon fiber was increased up to 800 MPa.

• 한국항공우주학회지
• /
• 제43권3호
• /
• pp.224-231
• /
• 2015

람다 날개 형상의 공력 계수에 대한 실험적 연구를 국방과학연구소의 중형아음속 풍동에서 수행하였다. 본 연구의 주목적은 옆미끄럼각의 변화에 따라 다양한 공력 계수가 어떻게 변화하는지를 조사하는 것이다. 옆미끄럼각이 $0^{\circ}C$인 경우, 피칭 모멘트가 급격히 불안정해지는 현상을 확인하였으며, 옆미끄럼각이 증가함에 따라 pitch break 현상이 더 높은 받음각에서 발생하는 것을 확인하였다. 롤링 모멘트는 옆미끄럼각이 있는 경우 pitch break와 유사한 특성을 보여준다. 이런 경향은 옆미끄럼각이 증가할수록 더 심하게 나타났다. 요잉 모멘트는 높은 받음각에서 옆미끄럼각에 따라 기울기가 크게 변화하였고 불안정한 방향 안정성이 뚜렷이 나타났다. 모멘트의 이런 특성들은 비행 제어를 위해서는 보다 효과적인 조종성 증가 장치가 필수적이란 것을 의미하고 있다.

• 동력기계공학회지
• /
• 제12권4호
• /
• pp.18-25
• /
• 2008

This paper investigated the new calibration algorithm of a straight-type five-hole pressure probe necessary for calculating three-dimensional flow velocity components. The new data reduction method Includes a look-up, a geometry transformation such as the translation and reflection of nodes, and a binary search algorithm. This new calibration map was applied up to the application angle, ${\pm}55^{\circ}$ of a probe. As a result, this data reduction method showed a perfect performance without any kind of interpolation errors In calculating yaw and pitch angle from the calibration map.

• 한국군사과학기술학회지
• /
• 제9권4호
• /
• pp.128-136
• /
• 2006

The purpose of this paper is to examine the dynamic stall characteristics of an elliptic airfoil when subject to constant pitch motions. In this study, which was motivated by the pressing need for a greater understanding of the reduced frequency$({\kappa})$ effects on flow patterns of elliptic airfoil, the various reduced frequencies were considered. The result confirms that the reduced frequency has a profound effects on the flow patterns. The increase of ${\kappa}$ accelerate the separation bubble bursting process up to ${\kappa}=0.10$, then diminish with further increase in ${\kappa}$. Compared with static condition, the dynamic pitching airfoil delays stall angle approximate $4{\circ}{\sim}5{\circ}$ during pitch-up stroke for ${\kappa}=0.10$. Results from this qualitative analysis provided valuable insight Into the control of dynamics stall.