• 한국전산유체공학회지
• /
• 제19권4호
• /
• pp.8-13
• /
• 2014

A series of numerical simulation has been carried out to study performance of a cyclone type oil separator, which is designed for the compressor of a refrigeration system. Working fluid is R22, which is a typical refrigerant, and mineral oil droplet is supplied. Pitch of the helix is considered as design parameters to make a compact separator. Depending on the helix pitch, separation efficiency varies from 97.5 to 99%, while predicted pressure drop ranges from 5 to 6.5 kPa. Considering both of the pressure drop and separation efficiency, helix pitch of the separator has been designed as 50 mm.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.75-79
• /
• 2016

A helical nanosturctrue can be obtained by self-assembly method. Utilizing DPD simulation coarse-grained model, we patterned 2D layer nanosheets with repeated diagonal defects and grafts, and programed to self-roll into hollow helix structure. The defected pattern side caused anisotropy, and formed helix or helix-like structure. This opens the possibility to control the helix pitch or cavity radius. In this work, we designed several patterns about diagonal defect with a variety of defect side densities and defect widths and then simulation was carried out. Thus, our results have that parameters are affecting self-assembly of nanosheets and their conformation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1410-1415
• /
• 2007

Recently introduced WBK(Wire-wounded Bulk Kagome) shows relatively superior mechanical properties compared to other types of PCM. WBK is fabricated by assembling helical wires in 6 directions. Wire being a helix, the wire's geometric properties like pitch and helical radius shows certain geometric characteristics which can play some critical role in setting up an automatic fabrication process. In this study, geometry of WBK is modeled by various transformations of a piece of helical wire and the characteristics of the geometry of an element of WBK truss are discussed. In addition, the roles of pitch and helical radius of wire in optimizing the assembling process are described and the derivation of criteria is attempted to decide proper helical radius which would maintain minimal interference between wires at the crossings.

• 대한치과의사협회지
• /
• 제51권10호
• /
• pp.551-555
• /
• 2013

The purpose of this study was to give a guideline for selecting the nickel-titanium (NiTi) file by review from many studies. Since the early 1990s, several instrument systems manufactured from NiTi have been introduced into endodontic practice. The specific design characteristics vary, such as tip shape and size, cross sectional view, helix angle, and pitch space. Some of the early systems have been removed from the market or play only minor roles; others are still widely used. New designs continually are produced, but the extent to which clinical outcomes will depend on design characteristics is difficult to forecast. In this study, I have reviewed the different design characteristics in respect of the safety and efficiency. With the review from many studies, I concluded that the clinicians must be understand the specific design characteristics for selecting the ideal NiTi rotary instruments.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.29-40
• /
• 2018

캐나다 및 베네수엘라에 주로 분포하는 오일샌드는 원유들이 모래질 흙의 간극에 존재한다. 이러한 오일샌드로부터 원유를 따로 추출하기 위해서는 규모가 큰 플랜트를 건설해야 한다. 일반적으로 오일샌드 플랜트의 기초는 주로 항타말뚝 혹은 현장타설말뚝이 사용되고 있다. 하지만 주로 극지에 위치한 오일샌드는 얼어있는 지반과 표층의 유기토 때문에 항타말뚝의 시공 및 장비 진입에 어려움이 있으며, 현장타설말뚝의 경우 기온이 낮기 때문에 콘크리트 양생에 문제가 있다. 이번 연구의 주제인 헬리컬 파일은 크지 않은 연직력에 기초한 회전력을 중심으로 빠르고 간편하게 시공이 가능하다. 따라서, 접근성이 떨어지는 극지환경에서도 소형장비를 사용하여 간단한 시공이 가능하며, 헬리컬 파일의 두부에 역회전을 가해 말뚝기초의 인발 및 재사용 또한 용이하다. 이번 연구에서는 헬릭스 피치를 변화시켜 헬리컬 파일 및 헬릭스의 거동을 수치해석으로 분석하였다. 수치해석의 검증은 모형 헬리컬 파일의 실내모형실험 결과와 비교하여 수행하였으며, 헬릭스의 피치에 따른 헬리컬 파일의 극한하중, 헬리컬 파일의 축에 부착한 각 헬릭스의 변위, 하중분담률을 분석하였다.

• Molecules and Cells
• /
• 제42권10호
• /
• pp.729-738
• /
• 2019

Autophagy is an important process for protein recycling. Oligomerization of p62/SQSTM1 is an essential step in this process and is achieved in two steps. Phox and Bem1p (PB1) domains can oligomerize through both basic and acidic surfaces in each molecule. The ZZ-type zinc finger (ZZ) domain binds to target proteins and promotes higher-oligomerization of p62. This mechanism is an important step in routing target proteins to the autophagosome. Here, we determined the crystal structure of the PB1 homo-dimer and modeled the p62 PB1 oligomers. These oligomer models were represented by a cylindrical helix and were compared with the previously determined electron microscopic map of a PB1 oligomer. To accurately compare, we mathematically calculated the lead length and radius of the helical oligomers. Our PB1 oligomer model fits the electron microscopy map and is both bendable and stretchable as a flexible helical filament.

• 대한토목학회논문집
• /
• 제40권4호
• /
• pp.393-400
• /
• 2020

헬리컬 파일의 수직 및 수평 거동은 헬릭스의 개수, 직경, 피치, 위치등의 변수에 영향을 받는다. 본 연구에서는 헬리컬 파일의 헬릭스 개수를 3개로 고정하고, 헬릭스의 위치, 직경, 피치를 변화시켜 가며 수직 및 수평 거동을 분석하였다, 특히, 헬릭스는 일반적으로 나선형의 입체적인 구조를 가지기 때문에, 헬리컬 파일 상부에 작용하는 수평하중방향이 헬리컬 파일의 수평 거동에 미치는 영향을 분석하였다. 이를 위하여 축소모형의 헬리컬 파일을 이용하여 실내모형실험을 수행하였으며, 이 결과를 같은 모델의 수치해석 결과와 비교하여 두 결과의 타당성을 확보하였다. 이후, 수치해석적으로 다양한 헬리컬 파일 형상을 가정하여 수직 및 수평 거동을 분석하였다. 결과적으로, 가정한 환경에 대해서는 헬릭스의 위치와 피치의 간격보다는 헬릭스의 직경이 수직 및 수평 지지력에 가장 큰 영향을 미치는 것으로 확인되었다.

• Steel and Composite Structures
• /
• 제21권3호
• /
• pp.605-628
• /
• 2016

The energy absorption characteristics of diamond core sandwich cylindrical columns under axial crushing process depend greatly on the amount of material which participates in the plastic deformation. Both the single-objective and multi-objective optimizations are performed for columns under axial crushing load with core thickness and helix pitch of the honeycomb core as design variables. Models are optimized by multi-objective particle swarm optimization (MOPSO) algorithm to achieve maximum specific energy absorption (SEA) capacity and minimum peak crushing force (PCF). Results show that optimization improves the energy absorption characteristics with constrained and unconstrained peak crashing load. Also, it is concluded that the aluminum tube has a better energy absorption capability rather than steel tube at a certain peak crushing force. The results justify that the interaction effects between the honeycomb and column walls greatly improve the energy absorption efficiency. A ranking technique for order preference (TOPSIS) is then used to sort the non-dominated solutions by the preference of decision makers. That is, a multi-criteria decision which consists of MOPSO and TOPSIS is presented to find out a compromise solution for decision makers. Furthermore, local and global sensitivity analyses are performed to assess the effect of design variable values on the SEA and PCF functions in design domain. Based on the sensitivity analysis results, it is concluded that for both models, the helix pitch of the honeycomb core has greater effect on the sensitivity of SEA, while, the core thickness has greater effect on the sensitivity of PCF.

• 한국산업융합학회 논문집
• /
• 제4권4호
• /
• pp.395-401
• /
• 2001

The characteristics of heat transfer and pressure drop through tubes has been investigated experimentally for a compound heat transfer enhancement. The test tubes were spirally indented tubes with wire coil inserts which had a various combinations of pitch and helix angles. Pure water was used as working fluids for the experiments, Heat transfer coefficients and friction factors of the test tubes were evaluated from the values of measured temperatures, flow rates and pressure drops. An performance evaluation was performed to find an optimal combination of spirally indented tubes with wire coil inserts. When the helix angle of wire coil insert are $71^{\circ}-72^{\circ}$, the best heat transfer enhancement was shown. The friction factor was 9 - 13 times higher than those in smooth tubes, and the heat transfer was enhanced a maximum of 500%.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.98-107
• /
• 1996

In order to predict analytically torque, thrust force, tool life and chip formation in drilling, cutting models for chisel edge with various tool-chip contact length were developed in this type. Also, the experimental tests are run with various pilot holes. The following conclusions were obtained from the analysis. \circled1 It's also found experimentally that thrust force(Fz) decreases as pilot hole diameter increases. \circled2 Surface roughness for material(G) is larger that for material(J). The difference over two materials in roughness value about 0.5$mu extrm{m}$. \circled3 Flank wear of the drill in cutting material of G less than any other kinds of materials(F, G, H, I, J). \circled4 In drilling a deep hole on a workpiece over SM45C either twist drill. The chip was conical helix type at the fist suspensely change the two segment type and than two a long pitch helix style.