• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.39-46
• /
• 2000

In pulp and papermaking process, enzymatic treatment of pulp fibres has been a topic of increasing interest in last decade. Lots of patents, papers and research reports were published on the application of enzymes in the fields of enzymatic bleaching, deinking, slime control, pitch control, waste water treatment and fibre modification. Cellulase and hemicellulase are the principal enzymes used for the modification of fibre property. This study was carried out for determinating the behaviors of enzyme to pulp fibres. A commercial enzyme, Denimax BT which is consisted with cellulase and hemicellulase, was treated to the kraft pulp produced from domestic hardwood mixtures. Results were mainly concentrated on the behaviors of freeness, drainability and fines content of fibres, and physical properties of paper with enzyme treatment. The freeness levels and dewatering ability were developed, and the fines contents were decreased. The creation of fines were controlled by the method of pre-enzyme treatment prior to fibre beating. The mechanical strength of paper, like tensile, burst, tear strength and folding endurance, were remarkably improved by the pre-enzyme treatment.

• 방사성폐기물학회지
• /
• 제3권4호
• /
• pp.349-358
• /
• 2005

본 연구에서는 고준위 방사성폐기물 심지층 처분시설의 규모 및 layout설정에 필요한 요소인 처분터널 및 처분공 간격에 대한 분석을 수행하였다. 이를 위하여, 기준 처분개념과 공학적 방벽 개념을 바탕으로 다양한 조건의 처분터널 및 처분공 단면을 설정하고, 단층 배치 및 복층 배치 개념 에 따른 처분동굴의 구조적, 열적 안정성을 분석하였다. 분석 결과를 바탕으로 설계에 있어서 주요한 고려인자 중의 하나인 굴착량을 감소시킬 수 있는 처분동굴 및 처분공 간격을 제안하였다. 본 연구의 결과는 심지층 처분시설 설계시 활용될 것이며, 향후, 부지에 대한 불확실성을 줄이기 위하여 정확한 부지특성 자료를 통한 상세한 분석이 필요하다.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.17-22
• /
• 2020

As devices such as smartphones, tablet PC, and wearable devices have been miniaturized, the connectors that go into the devices are also designed to be very small. The connector combines the plug and the receptacle to transfer electricity. As devices are miniaturized, the contact shape is formed by partially thinning the thickness of the raw material of the terminal in order to lower the coupling height of the plug and receptacle. The product used in this study is a receptacle terminal used for 0.4mm pitch board to board connector among fine pitch connectors. When the material thickness is reduced by forging the receptacle terminal, the width change of the pin is checked. To reduce the thickness of the material by forging, pre-notching is applied in the first step, forging in the second step, and notching in the third step. After forming the width dimension of the pin to 0.28 mm in the pre-notching process, in the forging process, the material thickness 0.08 mm and 0.02 mm (25%) were forged and the thickness was changed to 0.06 mm and the width change amount of the pin was measured. The facility produced 10,000 pieces at 400 SPM using a Yamada Dobby (MXM-40L) press, and thirty pins were measured and the average value was shown. After forging by using C5210-H (HP) and NKT322-EH, which are frequently used in connectors, analyze the amount of change in each material. The effect of punching oil on forging is investigated by appling FM-200M, which is highly viscous, and FL-212, fast drying oil. This study aims to minimize mold modification by predicting the amount of material change after forging.

• 응용통계연구
• /
• 제34권3호
• /
• pp.449-460
• /
• 2021

본 논문에서는 음성위조공격탐지(Voice spoofing detection) 문제에 데이터 증강을 적용한다. ASVspoof 2017은 리플레이 공격 탐지에 대해 다루며 진짜 사람의 음성과 환경이나 녹음·재생 장치의 조건들을 다르게 하여 위조한 가짜 음성을 분류하는 것을 목적으로 한다. 지금까지 이미지 데이터에 대한 데이터 증강 연구가 활발히 이루어졌으며 음성에도 데이터 증강을 시도하는 여러 연구가 진행되어왔다. 하지만 음성 리플레이 공격에 대한 데이터 증강시도는 이루어지지 않아 본 논문에서는 데이터 증강기법을 통한 오디오 변형이 리플레이 공격 탐지에 어떠한 영향을 미치는지에 대해 탐구해본다. 총 7가지의 데이터 증강기법을 적용해보았으며 그 중 DVC, Pitch 음성 증강기법이 성능향상에 도움되었다. DVC와 Pitch는 기본 모델 EER의 약 8% 개선을 보여주었으며, 특히 DVC는 57개의 환경변수 중 일부 환경에서 눈에 띄는 정확도 향상이 있었다. 가장 큰 폭으로 증가한 RC53의 경우 DVC가 기본 모델 정확도의 약 45% 향상을 이끌어내며 기존에 탐지하기 어려웠던 고사양의 녹음·재생 장치를 잘 구분해냈다. 본 연구를 토대로 기존에 증강기법의 효과에 대한 연구가 이루어지지 않았던 음성 위조 탐지 문제에서 DVC, Pitch 데이터 증강기법이 성능 향상에 도움이 된다는 것을 알아내었다.

• 한국항공우주학회지
• /
• 제31권8호
• /
• pp.19-26
• /
• 2003

비정상 Euler 방정식 틀에서 동안정 미계수의 정상 예측 방법을 제안하였다. 새로운 접근방법은 비정상 지배방정식을 수정하지 않고 정상 예측방법을 적용하도록 해 준다. 제안된 방법을 통해 lunar 코닝운동 및 나선운동을 사용하여 피치감쇠 계수 합과 개별 값을 계산하였다. ANSR 형상과 Basic Finner 형상에 대한 계산결과는 PNS 계산결과, 실험치, 그리고 비정상적 예측방법을 사용한 결과와 잘 일치하고, 직교좌표계에서 정상적 예측 방법이 피치감쇠 계수의 예측에 성공적으로 적용될 수 있음을 보여준다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.115-119
• /
• 1999

During mechanical pulp production and blcaching wood components, such as extractives, carbohydrates and lignin are dissolved and dispersed into the process waters. These components are called dissolved and colloidal substances(DCS). DCS can accumulate during water circulation and can in turn affect paper machine runnability and also the strength and optical properties of the paper. In this work DCS fraction origination from TMP process were treated with enzymes acting on triglycerides. glucomannans, and lignin and the effect of enzymatic treatments on the water composition as well as sheet properies were evaluated. Lipases were found to modify the chemical structure of the extractives resulting in more hydrophilic fibre surface and subsequent improvement in the sheet strength properties. Mannanase treatment, on the other hand, destabilized pitch. As a result, aggregation of pitch to the fibres was observed which in turn resulted in impaired strength properties. Laccase could effectively polymerize lignans and the reaction products seemed to be sorbed onto the fibres.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.639-643
• /
• 1997

This paper presents how nonlinear PID control algorithms can be applied on chemical processes for a more stable operation and perfect automation. A pass balance controller is designed to balance the exiting temperatures of a heater and a heat exchange network. The proposed controller has gain-varying integral action and deals with the operational constraints in an efficient manner. Also, the use of a PID gap controller is proposed to maximize energy saving and operation stability and to minimize operator intervention in operation of air fan coolers. The proposed controller adjusts the opening of a louver automatically in such a way that it keeps the air fan pitch position within the desired range. All these nonlinear PID controllers have been implemented on the distributed control system (DCS) for good reliability and operability. Operator acceptance was very high and the implemented controllers have shown good performance and high service factor still now on. The proposed methodology can be directly applied to similar processes without any modification.

• 말소리와 음성과학
• /
• 제3권1호
• /
• pp.35-43
• /
• 2011

The purpose of this paper is to evaluate the viability of employing the intonation exaggeration technique proposed in [4] in teaching English prosody to university students. Fifty-six female university students, twenty-two in a control group and the other thirty-four in an experimental group, participated in a teaching experiment as part of their regular coursework for a five-and-a-half week period. For the study material of the experimental group, a set of utterances was synthesized whose intonation contours had been exaggerated whereas the control group was given the same set without any intonation modification. Recordings from both before and after the teaching experiment were made and one sentence set was chosen for analysis. The parameters analyzed were the pitch range, words containing the highest and lowest pitch points, and the 3-dimensional comparison of the three prosodic features [2]. An AXB and subjective rating test were also performed along with a qualitative screening of the individual intonation contours. The results showed that the experimental group performed slightly better in that their intonation contour was more similar to that of the model native speaker's utterance. This appears to suggest that the intonation exaggeration technique can be employed in teaching English prosody to students.

• Advances in aircraft and spacecraft science
• /
• 제6권5호
• /
• pp.349-369
• /
• 2019

In the design of flight control systems there are issues that deserve special consideration and attention such as external perturbations or systems failures. A Simple Adaptive Controller (SAC) that does not require a-priori knowledge of the faults is proposed in this paper with the aim of realizing a fault tolerant flight control system capable of leading the pitch motion of an aircraft. The main condition for obtaining a stable adaptive controller is the passivity of the plant; however, since real systems generally do not satisfy such requirement, a properly defined Parallel Feedforward Compensator (PFC) is used to let the augmented system meet the passivity condition. The design approach used in this paper to synthesize the PFC and to tune the invariant gains of the SAC is the Population Decline Swarm Optimization ($P_DSO$). It is a modification of the Particle Swarm Optimization (PSO) technique that takes into account a decline demographic model to speed up the optimization procedure. Tuning and flight mechanics results are presented to show both the effectiveness of the proposed $P_DSO$ and the fault tolerant capability of the proposed scheme to control the aircraft pitch motion even in presence of elevator failures.

• 전자공학회논문지B
• /
• 제33B권1호
• /
• pp.96-107
• /
• 1996

본 논문에서는 직교 벡터 공간 변환을 이용한 새로운 음성 개성 변환 알고리즘을 제안하였다. 음성 개성 변환이란 임의 환자(source)가 가지고 있는 몇 개의 특징 변수를 다른 화자(target)의 특징 변수로 변환하는 기법이다. 본 논문에서는 LPC 켑스트럼 계수와 여기 신호의 스펙트럼, 그리고 피치 궤적을 변환하여 음성 개성변환을 구현하였다. LPC 켑스트럼 계수의 변환을 위해 직교 벡터 공간 변환 기법이 제안되었다. 이 기법은 KL(Karhunen-Loeve)변환을 이용한 principle component의 분리와 최소 자승 오차를 갖는 선형 좌표 변환을 통해 LPC 켑스트럼의 변환을 수행한다. 또한, 화자간의 운율적인 특징을 변환하기 위해 피치 궤적 변환 기법이 제안되었다. 피치 궤적 변환을 위하여 먼저 두 화자간의 기준 피치 패턴의 작성하고 기준 패턴간의 대응 관계를 추정한 후 이를 이용하여 source 화자의 피치 패턴이 target 피치 패턴으로 변환되도록 하였다. 컴퓨터를 이용한 모의 실험 결과 제안된 알고리즘은 객관적인 평가와 주관적인 평가에 있어서 우수한 성능을 나타내었다.