• 제목/요약/키워드: pipe flow

검색결과 1,642건 처리시간 0.032초

침수특성치를 이용한 침수위험성 평가 (Flooding Risk Assessment Using Flooding Characteristic Values)

  • 안정환;김건우;조원철
    • 대한토목학회논문집
    • /
    • 제33권3호
    • /
    • pp.957-964
    • /
    • 2013
  • 본 논문은 침수특성치를 이용한 도시유역의 침수위험성 평가방법을 제시하는 연구이다. 2010년 9월 21일 청계천상류의 효자배수분구(광화문 광장일대)에서 발생한 침수피해를 XP-SWMM 2010을 이용하여 모의하였다. 강우발생빈도별, 지속시간별로 관로첨두유출량 값을 구하여 침수상태를 분석한 결과 관로 내 첨두유출량만으로는 침수상태를 충분히 해석할 수 없음을 확인 할 수 있었다. 따라서 도시지역의 침수피해규모를 표현할 수 있는 침수특성치 6가지를 새롭게 정의하였으며 발생가능한 강우조합(강우량, 강우지속시간)을 침수특성치별로 산정하여 침수위험성 평가방법을 연구하였다. 모의 결과를 침수특성치별로 강우조합에 중첩하여 등치선도로 나타낸 "발생가능강우별 침수특성 등치선도"를 개발하여 이를 근거로 발생할 수 있는 모든 강우형태에 대한 침수위험성을 평가할 수 있음을 확인할 수 있었다. 또한 유역의 상태가 변하거나 치수계획규모를 변화시키는 것에 대한 침수특성치별 침수규모 해소정도를 쉽게 파악 할 수 있음을 확인하였다.

Influence of the Francis Turbine location under vortex rope excitation on the Hydraulic System Stability

  • Alligne, S.;Nicolet, C.;Allenbach, P.;Kawkabani, B.;Simond, J.J.;Avellan, F.
    • International Journal of Fluid Machinery and Systems
    • /
    • 제2권4호
    • /
    • pp.286-294
    • /
    • 2009
  • Hydroelectric power plants are known for their ability to cover variations of the consumption in electrical power networks. In order to follow this changing demand, hydraulic machines are subject to off-design operation. In that case, the swirling flow leaving the runner of a Francis turbine may act under given conditions as an excitation source for the whole hydraulic system. In high load operating conditions, vortex rope behaves as an internal energy source which leads to the self excitation of the system. The aim of this paper is to identify the influence of the full load excitation source location with respect to the eigenmodes shapes on the system stability. For this, a new eigenanalysis tool, based on eigenvalues and eigenvectors computation of the nonlinear set of differential equations in SIMSEN, has been developed. First the modal analysis method and linearization of the set of the nonlinear differential equations are fully described. Then, nonlinear hydro-acoustic models of hydraulic components based on electrical equivalent schemes are presented and linearized. Finally, a hydro-acoustic SIMSEN model of a simple hydraulic power plant, is used to apply the modal analysis and to show the influence of the turbine location on system stability. Through this case study, it brings out that modeling of the pipe viscoelastic damping is decisive to find out stability limits and unstable eigenfrequencies.

DAF 공정에서 공기포화장치와 노즐 특성 별 미세기포 발생에 미치는 영향 (An Effect of the Micro Bubble Formation Depending on the Saturator and the Nozzle in the Dissolved Air Flotation System)

  • 박상철;오호영;정몽규;송석용;안용희
    • 대한환경공학회지
    • /
    • 제35권12호
    • /
    • pp.929-936
    • /
    • 2013
  • DAF (Dissolved air flotation) 공정에서 공기포화장치(Saturator)와 미세기포 발생노즐은 미세기포 형성에 중요한 영향을 미치는 장치이다. 미세기포 발생 효율을 증가시키기 위해서는 공기포화장치 용기 안에서 기-액 접촉 효율을 증가시키고, 미세기포 발생노즐까지 이송 배관 내 압력을 일정하게 유지해 주어야 한다. 본 연구에서는 공기포화장치 내 순환수 유입 분사노즐과 포화수 이송 배관, 미세기포 발생노즐에 의한 미세기포 발생에 미치는 영향을 공기체적법과 기포 크기, 기포의 잔류시간 측정을 통해 비교해 보았다. 순환수 유입 분사노즐을 설치하고, 포화수의 이송 배관 내 압력손실이 발생하지 않는 구조, 미세기포 발생노즐의 통과유속을 증가시킬 경우 미세기포 발생 성능이 증가하였다.

공조용 로터리 압축기의 소음 저감에 관한 연구 (A Study on Noise Reduction of Rotary Compressor)

  • 안병하;김영수
    • 동력기계공학회지
    • /
    • 제3권3호
    • /
    • pp.60-69
    • /
    • 1999
  • The noise and vibration sources of rotary compressor for room air-conditioner are pressure pulsation of compression process, cavity resonance of inner space, structural radiation noise of shell and impact noise of discharge valve. Among them, pressure pulsation is very important noise and vibration source. Because it transferred various kinds of noise and vibration like as mentioned above. In this reason, muffler and resonator are used in order to absorb and remove these noises. But an analytical prediction using acoustic analysis does not coincident with the experimental result. The difference between analysis and actual state is due to the assumption of analysis. This paper covered with new concept of muffler design based on the turbulence kinetic energy of flow by using CFD. From this analysis, it is possible to decide the best position of discharge port of muffler. Therefore $2{\sim}3dB$ noise reduction effect is acquired in rotary compressor of 5000 BTU grade. Also new approach of resonator design is suggested. From this study, the characteristics of resonator and surge hole (a kind of resonator without pipe length) are identified. The former is useful for pure tone noise (narrow frequency band), and the latter is effective for broad frequency band. This paper shows that it is very available to use 3 dimensional analysis of resonator in order to predict more exact tuning frequency. The result is proved by a lot of experiments. From combination of fluid analysis and acoustic analysis, up stream position is effective location of resonator concerning turbulence motion of fluid.

  • PDF

상용 트럭의 공압 브레이크 응답 특성에 관한 연구 (The Korea Academia-industrial cooperation Society)

  • 김진택;정도균;최판진;박원기;박찬희;유범상;백병준
    • 한국산학기술학회논문지
    • /
    • 제13권5호
    • /
    • pp.1969-1975
    • /
    • 2012
  • 대형 상용 차량에 사용되는 에어 브레이크 시스템은 제동시 상대적으로 응답 시간이 길고 압력 손실이 크게 발생한다. 제동 시간은 파이프 시스템의 적절한 설계에 의해서 최소화 시킬 수 있다. 제동 시간은 시스템 압력의 증가, 에어 라인의 감소 및 재질의 변화에 대해 감소시킬 수 있다. 본 연구에서는 상용 트럭에 대한 리그를 구성하여 에어 브레이크의 특성에 대해서 고찰하였다. 해석 프로그램에 대한 신뢰성을 확보하기 위하여 실험 값과 비교하였고, 브레이크 시스템에 영향을 미치는 시스템 압력, 파이프의 재질 및 직경, 탱크와 챔버에서 압력에 대한 온도 영향을 검토하였다.

연속 옴가열 장치를 이용한 고추장 소스의 살균 (Sterilization of Gochujang Sauce with Continuous Ohmic Hea)

  • 최준봉;조원일;정정윤;정명수
    • 한국식품과학회지
    • /
    • 제47권4호
    • /
    • pp.474-479
    • /
    • 2015
  • 연속식 옴가열 장치를 이용한 고추장을 베이스로 한 모델 식품에 대한 가열 살균 연구를 진행하여, 옴가열을 이용한 소스 살균에 필요한 기초 데이터를 수집하였다. 옴가열 시 점도에 상관없이 $100^{\circ}C$까지 고르게 상승하였으나, 점도가 높을수록 전기전도도와 가열속도가 낮아져 살균력이 감소하는 것으로 나타나, 저점도 식품이 옴가열을 이용한 가열 및 살균에 있어 더 유용하다는 것을 알 수 있었다(13,14). 재래가열 후의 살균도는 65.4-75.4%, 옴가열 시는 89.5-95.0%로 살균력이 더 우수하였다. 향후 연속식 옴가열 장치의 살균효과를 더 높이기 위해서는 여러 개의 셀 연결 방식을 통해 한 개의 셀에서 온도를 조금씩 상승시켜 스케일 생성을 방지하는 연구와 셀 통과시 빠른 온도 상승에 의한 점도 변화로 살균 처리량이 변하기 때문에 최적 셀 조합 및 가열살균 조건에 대한 충분한 고찰이 필요할 것으로 생각된다.

불포화 강도 유실에 의한 지반함몰 현상의 모형 실험 재현 및 일반 보간 재료점법을 활용한 수치적 모사 (Model Tests and GIMP (Generalized Interpolation Material Point Method) Simulations of Ground Cave-ins by Strength Reduction due to Saturation)

  • 이민호;우상인;정충기
    • 한국지반공학회논문집
    • /
    • 제33권12호
    • /
    • pp.93-105
    • /
    • 2017
  • 본 연구에서는 하수관 손상에 의한 지반함몰 발생 과정에서 지반의 포화도 상승에 따른 흙의 불포화 강도 저하의 영향을 파악하기 위하여, 직접 전단 실험, 모형 실험, 그리고 수치해석을 수행하였다. 직접 전단 시험 결과, 흙의 마찰각은 포화도의 영향을 크게 받지 않으나, 점착력은 포화도의 영향을 크게 받음을 알 수 있다. 포화도 상승에 따른 강도저하의 영향만을 고려하기 위하여, 물의 침투효과를 배제한 모형 실험을 실시하여 지반 함몰 현상을 재현하였다. 지반 함몰은 대변위를 동반하며, 기존 유한요소법의 적용이 어렵다. 본 연구에서는 대변위 해석 기법인 일반 보간 재료점법을 사용하여 수행한 모형실험을 수치적으로 모사하였다. 비록 경계 조건 차이, 불완전 포화, 손상부 연결관의 폐색등에 의해 함몰 시간 등에는 차이가 있었지만, 유사한 토체의 변형 거동이 모형 실험과 수치해석에서 발견되었다.

댐의 심층저온수 취수시 수온 성층화 유지 조건에 대한 CFD를 이용한 분석 (Analysis of the Water Temperature Stratification-Maintaining Conditions Using CFD in Case of Intake of Deep, Low-Temperature Water)

  • 이진성;조수;심경종;장문성;손장열
    • 한국태양에너지학회 논문집
    • /
    • 제29권2호
    • /
    • pp.31-38
    • /
    • 2009
  • This study was conducted to forecast inner water temperature strata change by extracting deep water from a dam. For the methodology, the scope wherein the balance between the volume of low-temperature water intake through the virtual water intake opening as installed within the stored water area and the volume of water intake from the surrounding area is not destroyed was calculated through the CFD simulation technique using the computational fluid dynamics(CFD) interpretation method. This study suggested a supplementary method(diffuser) to avoid destroying the water temperature strata, and the effect was reviewed. In case of intake of the same volume, when the velocity of flow of water intake is reduced by increasing the pipe diameter, the destruction of water temperature strata can be minimized. When the area(height) where the intake of water is possible is low, a diffuser for interrupting the vertical direction inflow should be installed to secure favorable water intake conditions in case of water intake on the upper part. This study showed that there was no problem if the intake-enabled, low-temperature area was secured approximately 10m from the bottom when the scope that does not destroy the water temperature strata in case of water intake was forecast using the regression formula.

대심도 지하관로 배수 시스템의 서어징 현상에 관한 연구 (Study of Surges in a Large-Diameter Subteranean Diversion Channel with Multiple Surge Tanks)

  • 정광근;여운식;안태진
    • 한국수자원학회논문집
    • /
    • 제31권6호
    • /
    • pp.757-768
    • /
    • 1998
  • 6개의 수조와 1개의 펌프장을 갖고 있는 대심도 지하관로 배수시스템에서 발생하는 복잡한 서어징 현상을 강체수주이론에 의한 비선형 상태방정식에 의해서 해석하였다. 상태방정식은 각 수조에서의 유량연속방정식과 비선형항을 갖는 지하관로의 운동 방정식으로부터 구성된다. 홍수의 유입량과 펌프의 유출량을 장방형 펄스(pulse)로 하고 유출유량과 전유입유량이 같다고 한다면 비선형 상태방정식에 의한 각 수조수위의 진동은 선형화 방정식에 의한 결과와 잘 일치 하고 있다. 이것은 관로저항의 영향이 적고 이것을 무시한 자유진동해석이 타당하다는 것을 나타내는 것이다. 자유진동 방정식은 6개의 고유모드를 갖는다. 그 중 하나는 강체모드이며 유출유량이 전유입유량과 다를 때에 나타나며 이러한 6개의 고유모드는 유입유출조건에 의해서 여러 가지 서어징 현상을 구성한다. 강체모드가 존재하기 때문에 실제의 홍수 유입량에 대응한 고도의 펌프운전이 요구된다.

  • PDF

초어 및 백련의 인공 번식에 관한 연구 (AN EXPERIMENT TO INDUCE SPAWNING OF CHINESE CARPS BY PITUITARY INJECTION)

  • 김인배
    • 한국수산과학회지
    • /
    • 제3권1호
    • /
    • pp.19-26
    • /
    • 1970
  • 1969년 여름 부산수산대학 양어장에서 1963년 일본으로부터 도입하여 길러온 초어와 백련을 사용 채란과 부화실험을 하였는 바, 그 결과는 좋지 못하였지만, 다음과 같은 점을 지적한다. 1. 부산지방의 못에서 양식한 초어가 백련의 성숙 채란 적기는 6월 말부터 8원 초까지의 사이에 있다고 인정된다. 2. 산란 촉진용 뇌하수체는 동종 또는 근연종의 친어로부터 그들의 산란기이 진에 적출 보관하였다가 사용하는 것이 좋다고 인정된다. 3. 백련은 체장 40cm(전장 48cm) 가량의 작은 개체도 6년생은 모두 채란 가능하였으며, 포란수는 체장 $40\~44.5cm$ 되는 것에서 $23\~26$ 만개로 추산되었다. 4. 부화 시설로서는 원추형 망부화기를 급수 파이프에 병렬하고, 각 부화기에는 수량 조절용 발브를 달아서 수중에 설치하는 것이 좋은 동작을 하였다. 5. 알의 발생 중, 분할된 할구(세포)가 배체 밖으로 방출되는 것이 생기면, 그 알은 예외없이 괴사하였다. 6. 친어의 사전 관리를 보다 철저히 하는 것이 긴요함을 느꼈으며, 좋은 먹이와 적절한 수심 및 수온을 유지시키도록 해야 할 것이다.

  • PDF