• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.29-34
• /
• 2012

To examine possibilities to make use of woodceramics for the lower material of hot-floored ondol boards, woodceramics made from sawdust board with Pinus densiflora, put them in a wood frame and concrete block and heated them sending an electric current, and measured changes in surface temperature of a laminated floor board and a plywood floor board. As the sending an electric current to time passed, their surface temperature increased rapidly up to 20 minutes, and then gradually ascended. In terms of the surface temperature in the wood frame, the beginning temperature of a plywood floor board was higher than that of laminated floor one; however, as time passed, a laminated floor board's temperature rose, and after 60 minutes, it showed similar to the temperature of a floor board of lamination. On the other hand, the surface temperature in a concrete block showed that the laminated floor board was higher than the plywood floor board in both early and 60-minute later temperatures. With the lapse of time after switching off, the surface temperature of floor boards slowly dwindled up to 9 minutes, and from that time on, began to drop sharply. In terms of the descent speed of surface temperature, when woodceramics' surface temperature was adjusted at $70^{\circ}C$, the laminated floor board was the highest; when it was at $80^{\circ}C$, the plywood floor board was the highest, resulting in rapid descent speed of heat.

• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.49-56
• /
• 2011

This study was conducted to provide data for the maintenance of the Corylopsis coreana community within the Hallyeohaesang National Park. Survey site of Corylopsis coreana community was located at a valley, which composed of over 60% exposed rock. As this result, much of the species was damaged or washed away due to the water flow from rainfall. The tree layers dominant species were Quercus serrata and Pinus densiflora. while the subtree layers dominant species were Corylopsis coreana, Acer pseudosieboldianum, Sapium japonicum, Chamaecyparis obtusa and Cornus kousa etc. The shrub layers dominant species were Callicarpa japonica and Smilax china etc., and herbaceous layers dominant species were Disporum smilacinum etc. Increased precipitation and rainfall days were observed from May to September in this valley during 2008~2010, which likely increased soil erosion and damage. Because water flow pattern was dispersed the Corylopsis coreana seed and the soil floor was shallow, and population of Corylopsis coreana seedlings were diminished.

• The Korean Journal of Mycology
• /
• v.49 no.3
• /
• pp.405-412
• /
• 2021

Wolfiporia cocos is an important medicinal fungus that has been used in regions of Northeast Asia including Korea, Japan, and China. W. cocos is classified in Korea into two types (red bokryeong and white bokryeong) based on the internal colors (yellow orange-pale pink and white) of the sclerotium. Generally, the W. cocos type cultivated on farms produces white sclerotium. In this study, we endeavored to select strains that form sclerotium in sawdust medium using 2-way cross-breeding among two cultivated strains and three wild strains. Monospores were isolated from the fruiting bodies of cultivated and wild strains on potato dextrose agar. Thirty-nine strains of 338 hybrid strains isolated formed sclerotia with white or yellow colors upon culture for 3 months in Pinus densiflora sawdust medium. Selection for sclerotium forming strains using sawdust culture follows a very simple and easy procedure that is presented for the first time in this paper. We plan to test selected strains in the field to aid in developing new varieties for the future.

• Korean Journal of Environment and Ecology
• /
• v.35 no.2
• /
• pp.204-219
• /
• 2021

This study was conducted to investigate and analyze the characteristics of the plant community structure of vegetation distributed on the western slope and ridge connecting Mt. Noja to Mt. Gara. This basic research was executed not only to restore and manage forest vegetation, but also to monitor the trend of change in the long term. As a result of classifying the communitise in 86 survey quadrats, the Pinus thunbergii-Platycarya strobilacea comm. and P. thunbergii-P. densiflora comm. were distributed around the lowlands. The Carpinus tschonoskii-Deciduous broad-leaved comm., Styrax japonicus-Deciduous broad-leaved comm., Acer pictum subsp. Mono-Deciduous broad-leaved comm., Deciduous broad-leaved comm., and Zelkova serrata comm. appeared in the valley and all stone areas. Quercus serrata comm., Q. serrata-S. japonicus comm., S. japonicus-Carpinus cordata comm., Euonymus oxyphyllus comm. were classified as being distributed on steep slopes with relatively high altitude. According to the succession trend of the forest, evergreen conifers will be transition to deciduous broad-leaved trees. However, deciduous broad-leaved arboreous forests, such as Carpinus tschonoskii, zelkova serrata, and Acer pictum subsp. Mono, were considered to maintain their current succession stage because not only the stratified structure was developed over about 50 years tree age, but also ecologically stabilized. As environmental factors, it was analyzed that altitude, pH, content of clay and silt, Mg⁺⁺, Ca⁺⁺, etc. directly or indirectly affect the distribution of plant communities.

• Korean Journal of Environment and Ecology
• /
• v.32 no.6
• /
• pp.676-685
• /
• 2018

This study is to compare carbon budget between serpentine sites and non-serpentine sites dominated by Pinus densiflora forest in the Andong serpentine area where has high values of magnesium and low values of calcium, and are usually deficient in nitrogen and phosphorus, but rich in heavy metals such as nickel, chrome, cobalt, etc. and to measure soil $CO_2$ efflux and environmental factors between January 2017 and December 2017. Soil $CO_2$ efflux was measured with LI-6400 once a month; the soil temperature at 10 cm depth, air temperature, soil moisture contents, and solar radiation were measured in continuum. Soil $CO_2$ efflux in the serpentine area and non-serpentine were $151.71{\pm}75.09g\;CO_2{\cdot}m^{-2}month^{-1}$(42.48 ~ 262.61 g $CO_2{\cdot}m^{-2}month^{-1}$) and $165.09{\pm}118.96g\;CO_2{\cdot}m^{-2}month^{-1}$(20.94 ~ 449.24 g $CO_2{\cdot}m^{-2}month^{-1}$), respectively. Carbon storage in the serpentine area and non-serpentine area were 91.90, $222.85ton{\cdot}ha^{-1}$, respectively. Carbon absorption in the serpentine area and non-serpentine area were 7.99, $17.41ton{\cdot}ha^{-1}yr^{-1}$, respectively. Carbon budget in the serpentine area and non-serpentine area were absorbs 5.3, $14.49ton{\cdot}Cha^{-1}yr^{-1}$, respectively.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.255-267
• /
• 2013

This study aims to reveal the relationship between major climatic factors and radial growth in Siu-ri, NamYangJuSi, Kyeonggido. To identify tree growth responses to climatic variation, we used correlation analysis after standardization and cross-dating of tree ring growth. We use the climatic data(monthly mean, minimum, maximum temperature and precipitation) from September of previous year to August of current year. In terms of relationship between mean, minimum, maximum temperature and tree ring growth, negative correlations were observed in September and October of the previous year. In case of Quercus mongolica, negative relationship were appeared in December of the previous year, January and February of present year. When it comes monthly maximum temperature, August and September of present year was negatively correlated with radial growth in the case of Pinus densiflora. We can conclude that reduced soil moisture due to high temperatures causes a water stress that stunts tree growth. In contrast, there are positive correlations in March of present year. These results suggest that high temperatures in March appear to prolong the growing season. Growth was positively correlated with precipitation from October to December of previous year and from May to September of present year. The results suggest that the smooth water supply from precipitation can promote the tree growth.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.361-370
• /
• 2020

Long-term observation of the life cycle of plants allows the identification of critical signals of the effects of climate change on plants. Indeed, plant phenology is the simplest approach to detect climate change. Observation of seasonal changes in plants using digital repeat imaging helps in overcoming the limitations of both traditional methods and satellite remote sensing. In this study, we demonstrate the utility of camera-based repeat digital imaging in this context. We observed the biological events of plants and quantified their phenophases in the northern temperate type deciduous broadleaf forest of Jeombong Mountain. This study aimed to identify trends in seasonal characteristics of Quercus mongolica (deciduous broadleaf forest) and Pinus densiflora (evergreen coniferous forest). The vegetation index, green chromatic coordinate (GCC), was calculated from the RGB channel image data. The magnitude of the GCC amplitude was smaller in the evergreen coniferous forest than in the deciduous forest. The slope of the GCC (increased in spring and decreased in autumn) was moderate in the evergreen coniferous forest compared with that in the deciduous forest. In the pine forest, the beginning of growth occurred earlier than that in the red oak forest, whereas the end of growth was later. Verification of the accuracy of the phenophases showed high accuracy with root-mean-square error (RMSE) values of 0.008 (region of interest [ROI]1) and 0.006 (ROI3). These results reflect the tendency of the GCC trajectory in a northern temperate type deciduous broadleaf forest. Based on the results, we propose that repeat imaging using digital cameras will be useful for the observation of phenophases.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1291-1302
• /
• 2020

To verify the field-effectiveness of Terrestrial Laser Scanner (TLS), a terrestrial LiDAR was deployed to examine the damage properties of woods in forest fire area, then the data was compared with the results surveyed by a forestry expert. Four sample plots (30 m × 50 m, 0.15 ha) were set from the foot to the top of the mountain, and DBH, height, clear length, burned height, and crown length were investigated. Next, TLS collected information on damage characteristics found in the sample plots. This information was then compared with that amassed by the expert. The expert and the TLS survey results showed 30.8 cm and 29.9 cm for DBH, 15.8 m and 17.5 m for tree height, 8.4 m and 8.4 m for clear length, 4.0 m, 3.5 m for burned height, and 7.4 cm and 9.1 cm for crown length. With the exceptions of height and clear length, no notable discrepancy was observed between two methods. H/D ratio, CL/H ratio, and BH/CL ratio, all of which contribute to stability and decay rate of the stand, from the two methods were also compared. The human survey rated each ratio (H/D, CL/H, BH/CL in order) 51.3%, 47.1%, and 53.6%, while the TLS presented the results of 58.8%, 52.0%, and 38.7%.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.242-250
• /
• 2022

Here we aimed to date the year and season of the resin collection from Korean red pines at Worak mountain and investigate the natural healing ability of the wounds using the tree-ring analysis technique. We determined the dating of the resin collection based on the synchronization between the ring-width time series from the wound surface of the experimental trees and the local master chronology, which is the mean time series from the sound surface on the opposite side of the wounds. For the dating of resin collection, we selected thirteen Korean red pines with resin wounds. For the investigation on the annual healing ability of the wounds, we sampled three dead trees out of 13 trees as disks. Through the comparison of the individual ring-width time series from the wounds with the local master chronology, it was verified that the resin collection was undertaken between the spring of 1962 and the autumn of 1975. The mean healing length of the wounds was 15.8 cm over the preceding 42 years, making their annual mean healing 0.38 cm. Through our study we successfully verified the healing ability of the wounded Korean red pines for the resin collection as well as the undocumented resin collection history.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.66-73
• /
• 2004

Three species of Italian poplar (Populus euramericana), red pine (Pinus densiflora) and oriental oak (Quercus variabilis) were selected for this study. They were cut so that the distances between each of tips and roots for a pair of fingers were 0, 0.15, 0.30 and 0.45 mm. Poly vinyl acetate (PVAc) and resorcinol-phenol resin (RPR) were used for finger-jointing. Compressive test parallel to the grain was conducted for the finger-jointed specimens. The results were as follows: The efficiency of compressive Young's modulus of finger-jointed timber to solid wood indicated low values, whereas the efficiency of compressive strength indicated high values of more than 90% in all species, especially, it was found that those of red pine indicated markedly high values of more than 97%. The efficiency of compressive displacement of Italian poplar finger-jointed timber was 2 times higher than solid wood, and it was 1.2 and 1.3 times higher than solid woods in red pine and oriental oak, respectively. Also, it was found that 0, the distance between each tip and root for the fingers, indicated the highest efficiency of compressive strength performance in Italian poplar finger-jointed timber, and for red pine and oriental oak finger-jointed timbers, the distances of 0.15 and 0.30 were found to indicate the highest efficiency.