• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.648-658
• /
• 2015

Extraction of phytoncide oil from korea pine cone waste without damaging the pine cone tree itself was investigated using a steam distillation method. Also various components in the extracted phytoncide oil were separated using a column chromatography method. The extraction of phytoncide oil was effectively proceeded, and the maximum production yield of phytoncide oil could be obtained under $100^{\circ}C$ of distillation temperature and within 30 minute of distillation time. According to chemical analysis, it was found that the phytoncide oil from korea pine cone waste was consisted of more than 12 components such as ${\alpha}$-pinene, ${\beta}$-pinene, D-limonene, as main components. In addition, the aqueous hydrogel containing other components such as verbenone, ${\alpha}$-terpinieol, fenchol, different from components of phytoncide oil itself could be obtained through the steam distillation.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.475-489
• /
• 2013

This work was conducted to investigate the effect of the addition of binders, such as rapeseed flour, coffee waste, bark, pine cone and lignin powder, on the fuel characteristics of the pellets fabricated with larch and tulip tree sawdust. Moisture content, bulk density and higher heating value of most pellets fabricated with the binders exceeded the 1st-grade pellet standard designated by Korea Forest Research Institute, but ash content of the pellets fabricated with rapeseed flour or bark of 10 wt% on the dry weight basis of sawdust was satisfied with just the 2nd- or 3rd-grade standard. The durability of tulip tree-pellets was positively influenced by the addition of rapeseed flour, coffee waste or lignin powder and increased with increasing the amount of the binders. For larch-pellets, the increase of binders did not greatly affect the durability, and even the durability reduced with the increase of bark or pine cone. From the microscopic observation, the obvious feature of pellet surfaces was not identified by the type of binder but by the addition amount of the binder. In summary, the addition of binders contributed to the fuel characteristics of wood pellets, and particularly the characteristics of wood pellets fabricated with coffee waste improved greatly. Therefore, if the binders are secured sufficiently with a reasonable cost, it might be possible to commercialize wood/binder pellets, which have better fuel characteristics than conventional wood pellets.