• Geotechnical Engineering
• /
• v.39 no.6
• /
• pp.55-65
• /
• 2023

• Geotechnical Engineering
• /
• v.40 no.1
• /
• pp.36-42
• /
• 2024

• Journal of the Korean Geotechnical Society
• /
• v.32 no.6
• /
• pp.5-16
• /
• 2016

In the geosynthetics-reinforced piled embankment the effects of soft soil stiffness, friction angle of the fill material, tensile stiffness of geosynthetics, and height of the embankment on the load transfer soil arch measured by the critical height were numerically investigated. Results from parametric studies show that the magnitude of the soft soil stiffness is the most influencing factor on the critical height. The contour charts of the critical height with respect to the combination of the soft soil stiffness and other parameters were presented. The charts show that the critical height sensitively varies with the combination of the soft soil stiffness and the height of embankment. Under the sufficiently low stiffness of soft soil, the critical height sensitively varies with the friction angle of the fill material. Once the geosynthetic layer is placed, however, the magnitude of the tensile stiffness of the geosynthetic layer hardly influences the critical height of the soil arch.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.98-112
• /
• 1996

Tho purpose of this study was to investigate hygienic and comfortable properties of socks. Materials are nine summer socks either frequently being worn or new products recently introduced to market. Three female and three male adults participated in this study. Through wearing experiment, the numbers of microbes on foot and sock were counted and subjective sensation was measured. The microbes were isolated and identified based on growth physiological characteristics. Nine different socks had smaller number of bacteria of sock than that of foot. The number of bacteria of sock was significantly related with that of foot in cotton socks, in piled cotton socks, in mesh cotton socks, in cotton+ nylon+ linen blended socks, in nylon socks. Total number of bacteria of tv cut finished socks was most small and total number of bacteria was increased in the order of ultra fresh finished socks, untreated cotton socks, nylon socks, cotton + nylon+ linen blended socks, mesh cotton socks, polyester+ nylcn+ linen blended socks, piled cotton socks, cotton socks. Total number of bacteria of cotton socks and piled cotton socks were significantly different from that of uv cut finished socks. Finished socks and .jocks has high air permeability had significantly small number of bacteria. Comfortable sensation in nylon socks and polyester+nylon+linen socks was significantly uncomfortable. The way socks finished and air permeability of .jocks affected theirs hygienic property, while fiber type of them affected comfortablene, is. Bacteria identified were Staphylo coccus aureus, S. au rice larir, S. cahn ii, S. ep ids midis, S. haemo Iyticus, S. h am in 2's. S.fapraphyticus, S. warnery, 1 cinetobater calcoaceticus bio. anitratus, p.reudomonas mendocina, p. paucimobilis, Flavimonas Q ryzihabitans (CDC Group VE-2), and Xanthomanas maltophina. Fungi isolated were Spicaria sp., Thrichoderma sp., Fusarium sp., Aspergillus sp., Epicoccum sp., Cladosporium sp., and Penicillium sp..

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.06a
• /
• pp.77-89
• /
• 2002

To analyze a bearing capacity for pile groups, a number of model tests have been done and theoretical methods studied. In the case of design of group pile bearing capacity is calculated with only pile capacity. But uncertainty of bearing capacity and behavior of foundation cap(raft) leads to conservative design ignoring bearing effects of foundation cap. In the case of considering bearing capacity of foundation cap, the simple sum of bearing capacity of foundation cap and pile groups cannot be the bearing capacity of total foundation system. Since cap-pile-soil interaction affects the behavior of pile groups. Thus, understanding cap-pile-soil interaction is very important in optimal design. In this paper, the piled raft behavior is studied through model tests of 2$\times$2, 2$\times$3, 3$\times$3 pile group. Changes of behavior of pile group foundation by touching effects of foundation cap with soil are studied. Also changes of spacing between piles. Foundation cap is made of rigid steel plate and piles are made steel pipes. From this model tests, the changes of behavior changes of pile groups by touching effects of foundation cap with soil are studied.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.4
• /
• pp.31-43
• /
• 2015

A numerical analysis on the effect of increasing tensile stiffness of the geosynthetics on the soil displacement and pile efficiency was conducted. Parametric studies by changing the stiffness of soft soil, internal friction and dilatancy angles of the embankment material, and flexual stiffness of the composite layer including the geosynthetics were carried out. In general, increasing stiffness of the geosynthetics improves the pile efficiency, whereas the amount of its improvement depends on the condition of parameters. In case of the sufficiently low stiffness of the soft soil or high flexual stiffness of the composite layer including the geosynthetics, a noticeable increase in the pile efficiency can be observed. When the stiffness of the soft soil is very low, the increase in the stiffness of the geosynthetics can significantly reduce the vertical displacement in the piled embankment. When the flexual stiffness of the composite layer is sufficiently high, increasing stiffness of the geosynthetics can greatly improve the pile efficiency.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.5
• /
• pp.564-569
• /
• 2015

In highland crop fields, saprolite is piled up approximately every three years as deep much as 20 to 30 cm because farmers expect that adding new materials may improve productivity and mitigate hazards by continuous cultivation of a single crop. Piling saprolite, however, has been reported to induce poor soil drainage. Effects of deep ploughing with a spading machine and an excavator were studied in sites located in Daekwanryeong-myeon, Pyeongchang in which soil physical properties were deteriorated by piled saprolite. The soil made of parent material of Samgag series was piled up over surface soil of Haggog series naturally developed in the area. Carrot was cultivated in the field. Productivity and growth factors of carrot were compared among control and deep ploughing by a spading machine and an excavator. Effective soil depth extended to 60 cm or greater by 60 cm deep ploughing by an excavator or 50 cm deep ploughing by a spading machine. On the other hand, effective soil depth was within 50 cm at control plot. Productivity of carrot responded to amelioration of soil physical properties. The productivity was greater in deep ploughing treatments than that of control or 30 cm ploughing. It suggested that increased productivity by deep ploughing was mainly related to breaking plough pan which inhibited extension of rooting zone.

• Earthquakes and Structures
• /
• v.24 no.4
• /
• pp.289-301
• /
• 2023

Developing a competent soil-bridge interaction model for the seismic analysis of piled foundation bridges is of utmost importance for investigating the seismic response and assessing fragility of these lifeline structures. To this end, ground motion histories are deemed necessary at various depths along the piles supporting the bridge. This may be effectively accomplished through time history analysis of a free-field standalone soil column extending from bedrock level to ground surface subjected to an input bedrock motion at its base. A one-dimensional site/ground response analysis (vide one-directional shear wave propagation through the soil column) is hence conducted in the present research accounting for the nonlinear hysteretic behavior of the soil stratum encompassing the bridge piled foundation. Two homogeneous soil profiles atop of bedrock have been considered for comparison purposes, namely, loose and dense sand. Analysis of the standalone soil column has been performed under a set of ten selected actual bedrock ground motions adopting a nonlinear time domain approach in an incremental dynamic analysis framework. Amplified retrieved PGA and maximum soil shear strains have been generally observed at various depths of the soil column when moving away from bedrock towards ground surface especially at large hazards associated with high (input) PGA values assigned at bedrock. This has been accompanied, however, by some attenuation of the amplified PGA values at shallower depths and at ground surface especially for the loose sand soil and particularly for cases with higher seismic hazards associated with large scaling factors of bedrock records.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.8
• /
• pp.41-52
• /
• 2017

In this study, field measurements were investigated to analyze the load sharing ratio and behavior of piled raft foundation. The field measurements were performed for about 300 days from the start of construction. The geometry of the raft is $3.1m{\times}3.1m$, and the pre-cast and pre-bored pile is 23 m in length and 0.508 m in diameter. Based on the field measurements, the load-settlement relationship of the piled raft foundation was obtained, and the load sharing ratio of the pile was converged to 70% at ultimate loading condition. The load sharing ratio of the pile increased as the settlement increased, and this is because the surface friction of the weathered soil, which is at the lower ground, was significantly increased. Based on the results of the field measurements, load transfer curves were obtained and applied to a numerical analysis by using load transfer method.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.3
• /
• pp.5-16
• /
• 2023

The effect of raft flexibility on piled raft foundations in sandy soil was investigated using a numerical analysis and an analytical study. The investigation's emphasis was the load sharing between piles and raft following the raft rigidity (K_R), end-bearing conditions. The case of individual piles and subsequently the response of groups of piles was analyzed using a 3D FEM. This study shows that the α_pr, load-sharing ratio of piled raft foundations, decreases as the vertical loading increases and as the K_R decreases. This tendency is more obvious when using friction piles compared to using end-bearing piles. The effect of raft rigidity is found to be more significant for the axial force distribution - each pile within the foundations has almost similar axial forces of the pile head with a flexible raft; however, each pile has different values with rigid rafts, especially with the end-bearing piles. The axial force of the pile base with floating piles shows similar point-bearing resistance for all the piles; however, it shows different values with end-bearing piles. The differential settlement ratio of rafts showed a larger value with lower K_R.