• Food Science and Preservation
• /
• v.8 no.1
• /
• pp.102-108
• /
• 2001

Flow properties of the concentrated pigment solutions extracted from purple-fleshed sweet potatoes were determined using a cone and plate rotational viscometer for soluble solids concentration range of 25 to 65% at temperature range of 20 to 60 $^{\circ}C$. The purple-fleshed sweet potato pigment solutions exhibited Newtonian behavior. Temperature dependency for the viscosity of the solution followed the Arhenius relationship with activation energy values between 14.23 and 43.00 kJ/mol, which increased linearly with soluble solids concentration. A relationship between viscosity, temperature and soluble solids concentration was investigated. At the same temperature, the viscosity of the concentrated pigment solutions increased exponentially as the concentration increased with higher degree of such phenomena at lower temperatures.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.23-30
• /
• 2008

An extracellular pigment production of three Phellinus sp. (Phellinus 421, P. linteus and P. hartigil) through submerged cultivation was investigated. The maximum brown pigment from culture broth was obtained from the precipitate by addition of 10% 1M HCI solution. This precipitate showed absorption characteristics with ${\lambda}_{max}$ of 360nm. The maximum production of extracellular pigment obtained at optimum medium and culture condition was 3.54 ($A_{360}$). The precipitate was fractionated by Sephadex G-75 gel chromatography, and the isolated brown pigment contained a large amount of polyphenol and the small amounts of sugar and protein. The brown pigment fraction was stable in temperature range of $30{\sim}60^{\circ}C$, pH range of $4{\sim}6$, sugar addition ranges of $1{\sim}5%$ and salt addition concentration of 3 molarity. Antioxidative activity of the brown pigment by TBA method was better than that of vitamin E (${\alpha}$-tocopherol).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.2
• /
• pp.174-182
• /
• 1995

Using the optical data from the EUMELI 3 and 4 missions, the optical properties are discussed in relation to primary production in the oligotrophic zone of the Eastern Atlantic Ocean. The depth of euphotic layer $(Z_{eu})$, the total accumulated concentration of pigment $(C_{TOT})$ and the concentration of pigment (C) are 88m, $12.4mgm^{-2}\;and\;0.14mgm^{-3}$, respectively for the EUMELI 3 mission and 101.7m, $10.0mgm^{-2}\;and\;0.10mgm^{-3}$, respectively for the EUMELI 4 mission. The concentration of pigment is higher in autumn (EUMELI 3) than in spring (EUMELI 4). This indicates that the concentration of photosynthetic pigment has a close correlation with vertical attenuation coefficient $(K(\lambda))$ that changes seasonally in the euphotic layer. While the spectral distributions of downward Irradiance$(E_d)$ for the wave length of 470nm increase with depth, those of upward irradiance $(E_u)$ for the wave length range between 410nm and 490nm are constant, because the study area is covered with the blue and clear oceanic deep waters. The vertical attenuation coefficients of downward irradiance $(K_d)$ and upward irradiance $(K_u)$ have low values between 0.02 and $0.06m^{-1}$ due to the low absorption and scattering by the photosynthetic pigment of phytoplankton. Therefore this zone has the characteristics of the case 1 waters with low concentrations of photosynthetic pigment, and can be classifed into IB.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.61-67
• /
• 2016

This study was carried out in order to investigate the effect of pigment properties in a pre-coating layer on the characteristics of a top-coating layer and the print mottle of the coated paper. Five different pigments were applied for this study as raw materials for the pre-coating layer. The properties and print mottle of the coated paper samples were evaluated according to the coating color formulation. Type of pigments appliied in a pre-coating layer was one of the most important factor to control the properties of pre and top coating layer. Surface properties of pre and top coated paper were improved by blending GCC which had smaller particle size, with clay. Properties of a top-coating layer was affected by the pigment properties used in the pre-coating layer. It was found that print mottle of coated paper can be improved by replacing part of GCC with smaller particle size GCC or clay in pre-coating layer.

• The Research Journal of the Costume Culture
• /
• v.22 no.2
• /
• pp.339-345
• /
• 2014

This study analyzes and compares Hanji made with loess to Hanji made with kaolin, two yellow-based inorganic pigments, in terms of its physical properties, optical properties, and color fastness to light with the aim of using it as a fashion material. Hanji made by adding inorganic pigments showed an approximately 20% retention ratio on average. This figure was similar to those of loess and kaolin. Physical properties were analyzed, with the following results. A higher amount of additives lowered the apparent density and increased thickness and bulk. In general, inorganic pigment-added Hanji had lower tensile strength, bursting strength, and folding endurance compared to non-additive Hanji. The analysis of optical properties showed a lower brightness index for Hanji made with inorganic pigments compared to non-additive Hanji. When comparing the two inorganic pigments, the brightness of Hanji made with kaolin was higher. Regarding color fastness to light, loess showed level 4 and kaolin showed level 5 when 25% inorganic pigments on pulp were added to Hanji. Thus, Hanji made by adding inorganic pigments during the manufacturing process may perform well as materials for fashion because the additives enhanced both the color fastness to light and the bulk while maintaining the strength. In addition, Hanji dyed with inorganic pigments may have the potential to serve as materials for the fashion industry while still retaining the characteristics of Hanji.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.491-492
• /
• 2005

본 연구에서는 $Al_2O_3$, $SiO_2$ 판상체 위에 저굴절 및 고굴절 금속 산화물을 다층 교차 증착하여 Pearl Pigment를 sputtering 공법을 이용하여 증착하였다. Pearl Pigment는 Essential Macleod program 을 이용한 색상과 증착된 pigment의 색상이 파장에 따라 blue, violet, pink, red, orange, yellow, green 등(Wave length 450~623 nm)으로 동일하게 나타났고, 기존의 제품에 비해 색상효과기 뛰어나고, 표면 morphology가 우수하였다. 광학 현미경 및 주사전자현미경(SEM)으로 막 두께, 표면 조직 및 입자 크기를 측정하였고, EDS, XRD를 이용하여 정성 및 정량 분석을 하였다.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.81-99
• /
• 1996

The characteristics of printing inks are affected, to a greater or lesser extent, by the size and distribution of the pigment particles in the dispersion. Color strength, transparency and gloss increase with a decrease in particle size of pigments and with an increase in surface area of pigments. On the contrary, opacity and lightfastness tend to increases with an increase in particle size of pigments and with a decrease in surface are and particle size if pigments on the physical properties of printing ink which made up vehicles for sheet fed and organic pigment Lake Red C(C.I Pigment Red 53:1) that different surface area and particle size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.392-393
• /
• 2006

Direct Printing Process is a suitable fabrication technique to develope pigment components whose dimensions are in nano. The success of this process depends on the sysmatic preparation of pigment millbase. Conventional millbase dispersions are constituted of the organic pigments, monomer, dispersant and solvents. An experimental study on the rheology of millbase dispersions is presented.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.2
• /
• pp.75-87
• /
• 2003

Printing inks are mainly composed of pigment and vehicles. Among these components, the Vehicle affect the rheologic property of the ink the most but pigment content of characteristic also after to the fluidity property not less than the vehicle. In the study, It is tested effect to the ink fluidity and structure recovery according to change the pigment particle size. The ink fluidity have been observed by using rheometer at the various conditions and it has been tested to observe what the ink fluidity has different means. In result We have found that the viscosity value of the low shear rate range has relatively higher value with decreasing the pigment particle size in the ink. Also, it has been found that when the pigment particle size decreases, the yield stress gradually increase. In the case of ink's structure recovery, when the pigment particle size decreases in the ink, the less changing shear rate, and it takes less time to recover.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.1
• /
• pp.143-149
• /
• 1994

Carotenoids isolated from orange peels were determined physicocohemical properties with TLC, UV-spectrophotometer and HPLC etc., and the results were as follows . Maximum absorption wavelength of the isolated carotenoids was 415nm when the result was similar to $\beta$-carotene as 423nm. Eight spots were obtianed from TLC, and identified lutein, lycopene, $\alpha$-carotene and $\beta$-carotene with HPLC. The effect pH during the storage period of isolate carotenoids, the period when the amount of pigment retention was over 50% in pH 5, 6 and 7 , after 10 days . The amount of pigment retention was lower in control than in treatment of sugars such as fructose, glucose and sorbitol , but sucrose was similar to the control, Isolated carotenoids were stable to ascorbic acid, and the amount of pigment retention was over 70% after 10 days. The amount of pigment retention in the effect oforganic acid was higher in treated citric acid , lactic acid and tartaric acid than in control, but lower in treated maleic acid and succinic acid. Isolated carotenoids were stable at 50 $^{\circ}C$, and the amount of pigment retention was over 50% at 10$0^{\circ}C$.