고온$(500^{\circ}C)$ 환경에서 접촉식 탐상이 가능한 초음파 탐촉자를 개발하고 평가하였다. 고온용 탐촉자는 Curie 온도가 $600^{\circ}C$ 이상인 bismuth titanate 계열의 압전세라믹 소자, 텅스텐 분말과 inorganic binder를 혼합한 후면재, 알루미나 튜브, 전면재, 하우징 등으로 구성되었다. 기본 공진주파수가 각각 1.04 및 2.08 MHz의 2 종류 탐촉자를 제작하였으며 각종 고온용 커플런트의 온도특성을 시험하였다. 개발된 고온용 탐촉자를 이용하여 강재 시편을 대상으로 시편에서의 초음파 반사신호를 측정한 결과 시편의 온도가 증가함에 따라 반사신호의 크기는 감소하였다. 고온에서 반복측정 실험결과 $500^{\circ}C$에서 연속적인 접촉식 초음파 탐상이 가능한 것으로 나타났다.
Irschik, Hans;Krommer, Michael;Zehetner, Christian
Smart Structures and Systems
/
제18권1호
/
pp.139-154
/
2016
This paper is concerned with the dynamics of hyperelastic solids and structures. We seek for a smart control actuation that produces a desired (prescribed) displacement field in the presence of transient imposed forces. In the literature, this problem is denoted as displacement tracking, or also as shape morphing problem. One talks about shape control, when the displacements to be tracked do vanish. In the present paper, it is assumed that the control actuation is provided by imposed eigenstrains, e.g., by the electric field in piezoelectric actuators, or by thermal actuators, or via analogous physical effects, such as magneto-striction or pre-stress. Structures with a controlled eigenstrain-type actuation belong to the class of smart structures. The action of the eigenstrains can be conveniently characterized by actuation stresses. Our theoretical derivations are performed in the framework of the theory of small incremental dynamic deformations superimposed upon a statically pre-deformed configuration of a hyperelastic solid or structure. We particularly ask for a distribution of incremental actuation stresses, such that the incremental displacements follow exactly a prescribed trajectory field, despite the imposed incremental forces are present. An exact solution of this problem is presented under the assumption that the actuation stresses can be tailored freely and applied everywhere within the body. Extending a Neumann-type solution strategy, it is shown that the actuation stresses due to the distributed control eigenstrains must satisfy certain quasi-static equilibrium conditions, where auxiliary body-forces and auxiliary surface tractions are to be taken into account. The latter auxiliary loading can be directly computed from the imposed forces and from the desired displacement field to be tracked. Hence, despite the problem is a dynamic one, a straightforward computation of proper actuator distributions can be obtained in the framework of quasi-static equilibrium conditions. Necessary conditions for the functioning of this concept are presented. Particularly, it must be required that the intermediate configuration is infinitesimally superstable. Previous results of our group for the case of shape control and displacement tracking in linear elastic structures are included as special cases. The high potential of the solution is demonstrated via Finite Element computations for an irregularly shaped four-corner plate in a state of plain strain.
하나의 PZT 압전세라믹스 소자를 이용하여 종파와 청파를 동시에 송 수신할 수 있는 이중 모우드 초음파 센서에 관하여 이론적으로 고찰하고 실제로 제작하였다. 제작된 초음파 센서가 이중 모우드로 동작할 수 있는 최적조건을 찾기 위해 압전매질에서 파동의 전파방정식을 이론적으로 해석하고 이것으로부터 Euler의 회전 규칙으로 압전소자를 회전하여 절단 가능한 모든 면에 대해서 종파와 횡파의 동시 발생 기구를 조사하였다. 이론적인 해석결과를 확인하기 위하여 제작된 PZT 압전 세라믹스 소자를 종파와 횡파를 효율적으로 송 수신할 수 있는 회전각으로 절단하여 초음파 센서를 제작하고 주파수 변화에 따른 임피던스 변화를 측정하였다. 또한 여기서 제작된 초음파 센서를 스테인레스 스틸(STS303)로 제작된 지연선(delay line)으로 실험한 결과 하나의 초음파 센서로 종파와 횡파를 우수하게 송 수신할 수 있었다.
Vivar-Perez, Juan M.;Duczek, Sascha;Gabbert, Ulrich
Smart Structures and Systems
/
제13권4호
/
pp.587-614
/
2014
In recent years the interest in online monitoring of lightweight structures with ultrasonic guided waves is steadily growing. Especially the aircraft industry is a driving force in the development of structural health monitoring (SHM) systems. In order to optimally design SHM systems powerful and efficient numerical simulation tools to predict the behaviour of ultrasonic elastic waves in thin-walled structures are required. It has been shown that in real industrial applications, such as airplane wings or fuselages, conventional linear and quadratic pure displacement finite elements commonly used to model ultrasonic elastic waves quickly reach their limits. The required mesh density, to obtain good quality solutions, results in enormous computational costs when solving the wave propagation problem in the time domain. To resolve this problem different possibilities are available. Analytical methods and higher order finite element method approaches (HO-FEM), like p-FEM, spectral elements, spectral analysis and isogeometric analysis, are among them. Although analytical approaches offer fast and accurate results, they are limited to rather simple geometries. On the other hand, the application of higher order finite element schemes is a computationally demanding task. The drawbacks of both methods can be circumvented if regions of complex geometry are modelled using a HO-FEM approach while the response of the remaining structure is computed utilizing an analytical approach. The objective of the paper is to present an efficient method to couple different HO-FEM schemes with an analytical description of an undisturbed region. Using this hybrid formulation the numerical effort can be drastically reduced. The functionality of the proposed scheme is demonstrated by studying the propagation of ultrasonic guided waves in plates, excited by a piezoelectric patch actuator. The actuator is modelled utilizing higher order coupled field finite elements, whereas the homogenous, isotropic plate is described analytically. The results of this "semi-analytical" approach highlight the opportunities to reduce the numerical effort if closed-form solutions are partially available.
야간에 가로등이 없는 지방 국도 또는 우천시에 과속 방지턱이 보이질 않아 과속방지턱에 거의 근접하여 급 브레이크를 밟는 경우가 종종 발생하여 사고가 발생한다. 또한, 논 또는 밭과 인접한 지방 국도의 경우 농작물의 피해를 줄이고자 가로등 설치를 못하는 실정이다. 이 경우 야간에 사람들이 길을 다니는 경우 특히 검은색 계열의 옷을 입고 다니는 경우 사람의 존재를 운전자가 인식하지 못해 잦은 사고가 발생한다. 이 경우, 파장이 긴 색깔의 LED 가로등을 설치하면 농작물의 피해를 주지 않고 사람의 존재만 구별할 수 있어 교통사고를 줄일 수 있다. 따라서, 본 논문에서는 이를 위하여 과속방지턱에 LED를 부착하여 점등함로써 사전의 속도를 줄여 사고를 줄일 수 있고 또한 농작물에 피해를 주지 않으면서 인사 교통사고를 줄일 수 있는 태양광 및 압전소자를 이용한 절전형 LED 자동점등 지방국도(논로) 교통사고 방지 및 과속방지턱 겸용 가로등을 개발하였다. 태양광 및 압전소자를 이용 전력을 축척하여 LED를 점등하는 방식으로 조도센서를 사용하지 않고 태양광 소자의 에너지 축적 여부를 이용하여 LED를 ON/OFF한다. 또한 압전소자도 이용함으로써 여름철 장마에 태양광에 의한 축적이 부족한 경우를 대비할 수 있고, 또한 저전력 설계를 구현하여 최소 3일 이상 무충전시에도 정상 작동하도록 구현하였다.
본 연구의 목적은 형광직물과 재귀반사 소재만으로 제작, 보급되고 있는 현 안전의복에, 광섬유 적용으로 시인성을 높여 야간이나 기상악화 시 안전사고로부터 작업자나 보행자를 보호하는데 있다. 이를 위하여 LED를 촉매로 한 광섬유와, 에너지 하베스팅 기술을 적용하여 설계·제작한 안전조끼를 개발하였다. 안전조끼는 필름에 일체화된 자동 점멸 광섬유에 의해 빛을 방출하도록 설계되었고 이 조끼를 착용한 작업자의 움직임으로, 버려지는 에너지를 수확하여 광섬유의 발광을 더 지속적으로 구동시키기 위해 에너지 하베스터를 제작하여 부착하였다. 그 결과, 첫째로 조끼 착용자의 신체는 광섬유(optical fiber)와 재귀반사 테이프를 통해 멀리서 인식 가능하도록 시인성이 높아져 사고예방에 도움이 된다. 즉 야간에 실시하는 도로변이나 고지대에서의 작업, 구조대원의 활동, 스포츠 활동 시 사고를 예방하거나, 비상상황이 발생할 경우 광섬유 발광을 변화시키는 신호로 사고 지점을 빨리 발견할 수 있어 인명구조에도 도움이 될 것이다. 둘째, 생활 속 버려지는 에너지를 활용하기 위하여 압전소자 발전 시스템을 개발하여 압전 에너지 하베스팅 장치를 탑재한 결과, 배터리부의 유효 충전량을 활성화하고 보조 충전을 함으로써 에너지를 소량일지라도 효율적으로 생산할 수 있었다. 동시에 안전조끼에 내장하여 제작함으로써 탈착이 용이하도록 하여 활용도를 높였다. 기존 안전 조끼의 경우 야간에 주변 조명이 없을 때는 조끼를 착용한 사람을 인식하는 것이 거의 불가능하지만, 본 연구에서는 안전조끼의 빛 신호로 주변 조명이 없을 때에도 100m 이내에서 착용자를 식별할 수 있었다. 또한 광섬유적용 안전조끼는 측면에서의 시인성 향상뿐만 아니라 가볍고 (물)세탁이 가능하여 실용적 측면에서 현존하는 LED적용 안전의류보다 우수하다. 그러므로 본 연구에서 개발한, 광섬유와 에너지 하베스터를 장착한 안전조끼는 실용도가 높고 안전사고 발생 예방과 감소, 나아가 인명구조에 이바지할 것으로 추정된다.
This study investigated propagation characteristics of piezo-activated guided waves in an aluminium rectangular-section tube for the purpose of damage identification. Changes in propagating velocity and amplitude of the first wave packet in acquired signals were observed in the frequency range from 50 to 250 kHz. The difference in guided wave propagation between rectangular- and circular-section tubes was examined using finite element simulation, demonstrating a great challenge in interpretation of guided wave signals in rectangular-section tubes. An active sensor network, consisting of nine PZT elements bonded on different surfaces of the tube, was configured to collect the wave signals scattered from through-thickness holes of different diameters. It was found that guided waves were capable of propagating across the sharp tube curvatures while retaining sensitivity to damage, even that not located on the surfaces where actuators/sensors were attached. Signal correlation between the intact and damaged structures was evaluated with the assistance of a concept of digital damage fingerprints (DDFs). The probability of the presence of damage on the unfolded tube surface was thus obtained, by which means the position of damage was identified with good accuracy.
본 논문에서는 1-3형 압전복합재료를 단일상의 균질 압전매질로 모델링하기 위해 필요한 등가의 물성을 유한요소 해석으로 직접 추출하는 기법의 정확도를 다룬다. 직접 추출 기법은 압전재료의 전기적, 기계적 거동과 상호 간 커플링을 기술하는 구성방정식을 기반으로 물성 행렬의 개별 성분들을 직접적으로 산출하는 방법이다. 직접 추출에 사용되는 두 가지 구성방정식 조합 간의 정확도를 비교하기 위하여 단일 1-3형 압전복합재료 하이드로폰을 대상으로 등가물성과 수신감도를 산출하고 전체 영역에 대한 유한요소 해석 결과와 비교한다. 물성 추출의 정확도는 압전복합재료를 구성하는 폴리머의 탄성 특성과 밀접한 관련이 있음을 확인하고, 오차 원인을 분석하여 정확한 등가물성 산출을 위한 가이드라인을 제시한다. 압전복합재료 하이드로폰과 주변의 음향구조물을 포함하는 스테이브 규모에 대해서도 등가 모델링을 적용하여 추출된 물성의 정확도와 연산량 감소를 확인한다.
This paper presents the analysis of a time reversal process for $A_0$ Lamb wave mode($A_0$ mode) on a rectangular plate. The dispersion characteristic equation of the $A_0$ mode is approximated using the Timoshenko beam theory. A virtual sensor array model is developed to consider the effects of reflections occurring on the plate boundary on the time reversal process. The time reversal process is formulated in the frequency domain using the virtual sensor array model. The reconstructed signal is obtained in the time domain through an inverse fast Fourier transform. The validity of the proposed method is demonstrated through the comparison to the numerical simulation results computed by the finite element analysis.
인공와우는 와우의 물리적 또는 기능적 손상으로 유발된 청각장애를 가지고 있는 환자에게 청각기능을 회복하는 매우 효과적인 수단으로 알려져 있다. 하지만 현재까지 상용화된 인공와우 제품은 크기, 전력소모와 같은 측면에서 휴대성이 불편하여 아직 많은 한계점을 가지고 있다. 이러한 단점을 해결하기 위한 새로운 방식의 인체 삽입형 인공와우 개발이 요구되고 있다. 본 논문에서는 최근 연구 개발 중인 인체 삽입형 인공와우를 구성하는 센서부, 자극부, 무선통신부 등의 설계와 본 시스템에 탑재되는 통신시스템의 특징 및 시뮬레이션을 통한 평가결과 등을 기술하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.