• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.163-179
• /
• 2020

With the expansion of platform-based taxi service, mobility and convenience of users are getting better. However, due to profitability problem, marginalized areas in the supply of the service are expected to appear. As such, this study analyzed spatial marginalization of taxi service caused by imbalance in supply and demand during the night-time when public transportation service is suspended. According to hot-spot analysis of taxi, outskirt of a city and residential areas showed high vacancy and greater number of drop-offs compared to the number of pick-ups. On the contrary, they were confirmed low in the center and sub-centers of a city. Centrality analysis also showed a similar pattern with hot-spot analysis. Due to this, drivers may refuse to pick up a customer bound for an area with lower out-degree centrality compared to in-degree centrality as it might be difficult for the drivers to pick up another customer after dropping off the current customer. Thus, customers may need to wait for a taxi for a longer time. For this reason, improvement in spatial marginalization caused by mismatch of supply and demand is required. Also, the outcome of this study is expected to be utilized as a basic data.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.256-263
• /
• 2007

High NA objective design by using SELFOC materials was studied, and two kinds of objective for optical pick-up were designed. The SELFOC materials have radial gradient index distribution, and it gives additional degree of freedom in optical design. Therefore, we expect that optical design of high NA objective without aspheric surface will be possible. In this study, the variation of ms spot diameter was investigated as a function of quadratic constant and refractive index on axis for various combinations of axial thickness and entrance pupil diameter. For the survey, Code V was used for optimization and evaluation of the objective lenses. The result suggested that larger quadratic constant and higher refractive index on axis could give us better imaging performance for all combinations of axial thickness and pupil diameter. Based on the survey, we designed high NA objectives for DVR. There were two kinds of design solution consisting two spherical SELFOC lenses. The solution I had positive-positive lens configuration with short over-all-length, but it had poor off-axial performance compared with the solution II. The solution II had negative-positive lens configuration with good off-axial imaging performance. But the solution II had some disadvantages, long over-all-length and large diameter of the second lens.

• Journal of Information Technology Applications and Management
• /
• v.18 no.2
• /
• pp.1-21
• /
• 2011

In this era of convergence, which is characterized by the integration and combination of technology and industries, broadcasting and communications, offline and online, and devices and services, the content industry is also experiencing rapid changes including inter-genre exchange, the creation of new industries, and customized demand. Specifically, IT-based digital content industries such as the online game, e-book, mobile contents and web portal industries are no longer restricted to the boundaries of video, music and games but are being expanded into the realms of education, medicine, fashion and sports thanks to CT innovation of 3D, CG, AR/VR, VFX, etc. As such, various countries have come to recognize the convergent content industry as a new growth engine that will pick up where the IT industry left off, and are forming policies for its development accordingly. This research aims to optimize the system of content taxonomy which is currently genre-focused and unable to support technological development and convergence, and to discover and select star contents to be rigorously developed with governmental support. In this paper, 20 star contents in 8 areas were selected, and these are expected to create tremendous cultural and economic value through ongoing technological and industrial development.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.78-78
• /
• 2001

현재 Lab Coating은 실험의 정확성 및 재현성을 위해 기존의 Hand Coating에서 탈피하여 Mayor Coater나 CLC(Cylindrical Laboratory Coated) 등을 사용하여 주로 진행된다. Lab Coater로는 현재 가장 진보된 장비라고 할 수 있는 CLC의 경우 속도와 metering 방식 등에서 현장과 유사한 조건을 재현할 수 있다. 그러나 CLC를 사용하여 Multi Layer C Coating을 실시할 경우 원하는 도공량을 얻기 위해서는 상당한 시간과 노력이 필요하며 특히 Triple Coating의 경 우는 더 힘 든 과정 을 거 쳐 야 한다. 그래서 본 연구에서는 도공량 변화 및 Color Formulation 변경에 의한 물성변화를 측정 하여 Triple Coating에서 두 인자가 각각의 품질에 미치는 영향을 비교 분석하여 어느 정도 도공량 변화가 Color Formulation 변화에 상응하는 영향을 주는지를 파악하고자 하였다.코팅은 CLC 6000을 이용하여 실시하였으며, rod와 blade를 사용한 Triple coating을 5가 지 경우의 Color Formulation에 대하여 실시하였다. 변화시켜 코팅한 후 도공량에 따른 백지물성 관계를 분석한 결과 백색도, 평활도, 거칠음도, 투 기도,2도 trap, Set-Off, Dr${\gamma}$ pick은 총도공량과 강한 상관관계를 보였고, 광택도와 K&N은 총도공량보다는 Top 코팅량과 강한 상관 관계를 보였다. 동일한 코팅칼라를 이용하여 인쇄물성을 고찰하였다. 도공량과 물성의 그러나 동일한 코팅칼라를 사용하여 얻어진 일련의 상관성은 Color Formulation이 변경 되었을 경우 전혀 발견할 수 없었다. 즉 Triple Coating에서 코팅칼라 변경이 품질에 미치는 영향은 도공량 변화에 비해 절대적이어서 몇십%의 현을 억제하지는 못한다는 결론을 도출할 수 있었다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.3
• /
• pp.11-20
• /
• 2018

Smart devices refer to various devices and control equipment such as health care devices, imaging devices, motor devices and wearable devices that use wireless network communication (e.g., Wi-fi, Bluetooth, LTE). Commercial services using such devices are found in a wide range of fields, including home networks, health care and medical services, entertainment and toys. Studies on smart devices have also been actively undertaken by academia and industry alike, as the penetration rate of smartphones grew and the technological progress made with the fourth industrial revolution bring about great convenience for users. While services offered through smart devices come with convenience, there is also various security threats that can lead to financial loss or even a loss of life in the case of terrorist attacks. As attacks that are committed through smart devices tend to pick up where attacks based on wireless internet left off, more research is needed on related security topics. As such, this paper seeks to design an access control method for reinforced security for smart devices. After registering and authenticating the smart device from the user's smart phone and service provider, a safe communication protocol is designed. Then to secure the integrity and confidentiality of the communication data, a management process such as for device renewal or cancellation is designed. Safety and security of the existing systems against attacks are also evaluated. In doing so, an improved efficiency by approximately 44% compared to the encryption processing speed of the existing system was verified.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.185-192
• /
• 2012

Line planning is to determine the frequency of trains on each line to satisfy origin-destination demand while minimizing total operation cost. However, different from the line planning in passenger transportation, it is more important at which intermediate stations each train should be stopped and shunted because the freight car handling works like drop-off or(and) pick-up can incur much time and high cost so that the delay deteriorates the quality of rail freight transportation service. We present an optimization model for constructing line plan in rail freight transportation to simultaneously minimize the train operation cost and total transportation time of freights. And we suggest a column generation approach for our problem, which can solve the real network instances in reasonable computation times.

• Asia-Pacific Journal of Business
• /
• v.6 no.1
• /
• pp.27-43
• /
• 2015

The objective of the present study is to identify the security factors that influence customer trust towards intention to continue using Internet banking in Malaysia. The participants are individual Internet banking users in Peninsular Malaysia. Data was collected through self-administered questionnaires distributed using the drop-off and pick-up (DOPU) technique to bank branch managers who then passed the questionnaires to their customers. A total of 413 respondents completed the questionnaires. The SPSS statistical analysis software package and Partial Least Squares statistical method were used for data analysis and hypothesis testing. The results show that authentication, confidentiality, data integrity and non-repudiation are significant factors that influence customer trust towards intention to continue using Internet banking. Trust plays a critical role in influencing the intention to continue using Internet banking in Malaysia while perceived privacy does not. An understanding of the factors identified in this study will enable Internet banking providers to effectively and efficiently enhance the security of services and thereby promote continued usage of Internet banking among customers. The findings of this study are thus expected to be of great use to Internet banking providers as improvements in Internet banking security will increase business in the long run.

• Journal of Information Technology Services
• /
• v.14 no.4
• /
• pp.269-281
• /
• 2015

The objective of this study is offering new on line business model for automotive market. In order for the research aim, we conduct direct in-depth interviews with CEO, including analysis of business patterns on eight automotive firms in Gwangju city. As a result, we suggest new business model so called, Online to offline (o2o) that combines advantages in both off-line and on-line business. Techniques that o2o automotive companies may employ include in-store pick up of items purchased online, allowing customers. Purchasing the automotive is not only a car but also services including insurance, warrant services. o2o business model suggested shows the operating of the goods and service sale. When it comes to characteristics of automotive conventional sale patterns, utilization of the online-to-offline commerce has not eliminated the advantages that e-commerce companies have. That model can enhance the new values for customers as well as new market creation. Also, this new business model (o2o) can contribute the emerging industry business model installed based in particular, emergence of Iot (Internet of thing) in terms of sharing knowledge and information between enterprise and customers.

• Advances in aircraft and spacecraft science
• /
• v.5 no.3
• /
• pp.335-348
• /
• 2018

The structural dynamics (SD) behavior of Elastic Flapping Wings (EFWs) is investigated analytically as a novel approach in EFWs analysis. In this regard an analytical SD solution of EFW undergoing a prescribed rigid body motion is initially derived, where the governing equations are expressed in modal space. The inertial forces are also analytically computed utilizing the actuator induced acceleration effects on the wing structure, while due to importance of analytical solution the linearity assumption is also considered. The formulated initial-value problem is solved analytically to study the EFW structural responses, where the effect of structure-actuator frequency ratio, structure-flapping frequency ratio as well as the structure damping ratio on the EFW pick amplitude is analyzed. A case study is also simulated in which the wing is modeled as an elastic beam with shell elements undergoing a prescribed sinusoidal motion. The corresponding EFW transient and steady response in on-off servo behavior is investigated. This study provides a conceptual understanding for the overall EFW SD behavior in the presence of inertial forces plus the servo dynamics effects. In addition to the substantial analytical results, the study paves a new mathematical way to better understanding the complex role of SD in dynamic EFWs behavior. Specifically, similar mathematical formulations can be carried out to investigate the effect of aerodynamics and/or gravity.

• Korean journal of food and cookery science
• /
• v.27 no.6
• /
• pp.671-680
• /
• 2011

In this study, frying mix was prepared containing 0.5, 1.0, 1.5 or 2.0% brown rice fiber(BRF). The samples along with a control were then compared regarding their quality characteristics, including pasting properties, spreadability, pick-up ratio, color, textural characteristics, moisture and oil contents, and sensory qualities, all to determine the optimal ratio of BRF. For the pasting properties of frying mix, the control group was evidenced by a significantly higher peak viscosity, through viscosity, and final viscosity than that observed in the BRF samples. Breakdown was the highest at the 1.0% addition level, and time to peak viscosity and pasting temperature were maximal with the 0.5% addition. There was no significant difference in setback among the experiments. Spreadability and pick-up ratio of frying batter were not significantly different among the samples. As the BRF content increased, the lightness, greenness decreased, whereas yellowness increased. The BRF samples presented significantly higher hardness of fried batter than the control group and there was no significant difference in crispiness among the samples. Moisture content of fried sweet potato decreased with increasing BRF and oil content was the maximum on the control group. In the sensory evaluation, appearance, color, flavor, savory taste, yellowishness, coating thickness, off-flavor, and oiliness were not significantly different among the fried sweet potato samples. Bindingness, crispiness, and chewiness were highest in the control samples but minimal at a addition level of 2.0%. The control group evidenced significantly higher overall acceptability than were observed in the BRF samples. In conclusion, the results demonstrated that 0.5~1.0% BRF may prove quite useful as a additive for frying mix in the preparation of fried sweet potato and may provide favorable textural and functional properties.