• Journal of Biosystems Engineering
• /
• 제38권2호
• /
• pp.87-94
• /
• 2013

Purpose: Pineapple is now the third most important tropical fruit in world production after banana and citrus. Phytosanitary irradiation is recognized as a promising alternative treatment to chemical fumigation. However, most of the phytosanitary irradiation studies have dealt with physiochemical properties and its efficacy. Accurate dose calculation is crucial for ensuring proper process control in phytosanitary irradiation. The objective of this study was to optimize phytosanitary irradiation treatment of pineapple in various radiation sources using Monte Carlo simulation. Methods: 3-D geometry and component densities of the pineapple, extracted from CT scan data, were entered into a radiation transport Monte Carlo code (MCNP5) to obtain simulated dose distribution. Radiation energy used for simulation were 2 MeV (low-energy) and 10 MeV (high-energy) for electron beams, 1.25 MeV for gamma-rays, and 5 MeV for X-rays. Results: For low-energy electron beam simulation, electrons penetrated up to 0.75 cm from the pineapple skin, which is good for controlling insect eggs laid just below the fruit surface. For high-energy electron beam simulation, electrons penetrated up to 4.5 cm and the irradiation area occupied 60.2% of the whole area at single-side irradiation and 90.6% at double-side irradiation. For a single-side only gamma- and X-ray source simulation, the entire pineapple was irradiated and dose uniformity ratios (Dmax/Dmin) were 2.23 and 2.19, respectively. Even though both sources had all greater penetrating capability, the X-ray treatment is safer and the gamma-ray treatment is more widely used due to their availability. Conclusions: These results are invaluable for optimizing phytosanitary irradiation treatment planning of pineapple.

• 방사선산업학회지
• /
• 제8권2호
• /
• pp.97-104
• /
• 2014

Postharvest diseases cause considerable losses to harvested fruits and vegetables worldwide. Fresh produce suspected of harboring postharvest disease must be treated to control any pathogens present. Although there are various treatments to control postharvest losses by pathogens, the current community is eager to take safer and more eco-friendly alternatives to help with human health and reduce environmental risks. Ionizing irradiation is a promising phytosanitary treatment that has a significant potential to control postharvest diseases in use worldwide. Although almost 19000 metric tons of sweet potatoes and various fruits are irradiated each year in six countries to control postharvest disease, irradiation continues to be a debate, with slow acceptance by industries. Irradiation alone is not effective as a fungicide, and an over dose affects the physical properties of irradiated products. A combination of irradiation with other treatments such as heating, biocontrol agents, chlorination, and nano Ag particles is to enhance their effectiveness. Challenges to the use of phytosanitary irradiation are an avoidance of irradiated postharvest and cost of the irradiation facilities, and thus consumers still need to be educated on the principles and benefits of irradiation and prepare an optimum economy of scale for commercial use. In this review, we evaluated the current phytosanitary irradiation, and combination with various other treatments to minimize the postharvest losses.

• Journal of Biosystems Engineering
• /
• 제39권3호
• /
• pp.205-214
• /
• 2014

Purpose: Phytosanitary irradiation treatment can effectively control regulated pests while maintaining produce quality. The objective of this study was to establish the best irradiation treatment for mangosteen, a popular tropical fruit, using a Monte Carlo simulation. Methods: Magnetic resonance image (MRI) data were used to generate a 3-D geometry to simulate dose distributions in a mangosteen using a radiation transport code (MCNP5). Microsoft Excel with visual basic application (VBA) was used to divide the image data into seed, flesh, and rind. Radiation energies used for the simulation were 10 MeV (high-energy) and 1.35 MeV (low-energy) for the electron beam, 5 MeV for X-rays, and 1.25 MeV for gamma rays from Co-60. Results: At 5 MeV X-rays and 1.25 MeV gamma rays, all areas (seeds, flesh, and rind) were irradiated ranging from 0.3 ~ 0.7 kGy. The average doses decreased as the number of fruit increased. For a 10 MeV electron beam, the dose distribution was biased: the dose for the rind where the electrons entered was $0.45{\pm}0.03$ kGy and the other side was $0.24 {\pm}0.10$ kGy. Use of an electron kinetic energy absorber improved the dose distribution in mangosteens. For the 1.35 MeV electron beam, the dose was shown only in the rind on the irradiated side; no significant dose was found in the flesh or seeds. One rotation of the fruit while in front of the beam improved the dose distribution around the entire rind. Conclusion: These results are invaluable for determining the ideal irradiation conditions for phytosanitary irradiation treatment of tropical fruit.

• 무역학회지
• /
• 제44권4호
• /
• pp.19-34
• /
• 2019

This study investigates the WTO dispute over Japanese fishery products originated from Fukushima and another seven prefectures. Being subject to an import ban and additional radioactive test requirements, Japan complained that the Korean government's trade measures are inconsistent with the principles of the Agreement on Sanitary and Phytosanitary Measures. This paper considered the contrasting judicial decisions made by the Panel and Appellate Body and analyzed the debates with respect to their trade-discriminatory effects (Article 2.4), the relevance of appropriate level of protection (Article 5.6) and the precautionary approaches (Article 5.7). Consistent with the final rulings, this paper identifies the need for a broaden understanding of regional conditions and qualitative aspects of protection in risk analysis. Findings also suggest that Korea has diverted its fishery imports from Japan to other countries, while Japan has created export diversion from Korea to other destinations.

• 무역학회지
• /
• 제46권6호
• /
• pp.1-19
• /
• 2021

This paper examines the impact of sanitary and phytosanitary standards (SPS) and technical barriers to trade (TBT) on Korean exports, taking global value chains (GVC) participation into consideration. Using product-level import data from 2000 to 2014, we find heterogeneous effects of importers' SPS and TBT on Korean exports depending on the degree and position of GVC participation. According to the results, trade restrictive effects of SPS and TBT are smaller for industries that are more deeply involved in GVC. However, trade restrictive effects are greater for industries located at a relatively upstream production stage in GVC.

• 한국어병학회지
• /
• 제28권1호
• /
• pp.1-7
• /
• 2015

In 2009 outbreaks of an emerging disease in shrimp farms were first reported in China. The disease was known as early mortality syndrome (EMS), or acute hepatopancreatic necrosis disease (AHPND). Since 2009, the disease has been spread to Vietnam, Malaysia, Thailand and Mexico. The causative agent of the disease was identified as Vibrio parahaemolyticus. It is a common seawater inhabitant bacterium, and the pathogen can sometimes contaminate seafood. The disease has caused mass mortality of cultivated shrimp, and huge economic losses in the countries named above. In order to prevent the introduction and establishment of AHPND, emergency measures, such as strengthening of import conditions and even import bans, were put in place by many other countries. In Korea, on the other hand, there are large quantities of shrimp imports from countries, such as Thailand and Vietnam. Transportation of live and fresh dead shrimp is highly likely, and could be a transmission pathway if the shrimp are sourced from populations in AHPND endemic areas. It is important to recognize that importing countries may provisionally adopt sanitary or phytosanitary measures on the basis of available pertinent information, including that from the relevant international organizations, as well as from sanitary or phytosanitary measures applied by other countries based on "Agreement on Application of Sanitary and Phytosanitary Measures". It is pertinent that Korea also takes proper emergent measures to keep out diseases and provide safe seafood.

• Entomological Research
• /
• 제48권5호
• /
• pp.331-338
• /
• 2018

Spotted wing drosophila (SWD) has emerged as a major invasive insect pest of small berry fruits in the Americas and Europe since the late 2000s. Thus, phytosanitary treatment of commodities for export is imperative to prevent the movement of viable SWD to newer areas. In the present study, all developmental stages of SWD were irradiated with different doses of gamma and electron beam radiation to assess developmental inhibition to identify potential quarantine doses of the radiations. Ionizing radiation induced developmental inhibition of all stages of SWD. The effective doses for 99% inhibition ($ED_{99}$) of hatching, pupariation, and adult emergence from irradiated eggs for gamma radiation were 882, 395 and 39 Gy, respectively, compared with 2849, 687, and 41 Gy, respectively, for electron beam radiation. The $ED_{99}$ for inhibition of pupariation and adult emergence in irradiated larvae were 703 and 47 Gy, respectively, for gamma radiation, and 619 and 33 Gy, respectively, for electron beam radiation. Pupal irradiation did not completely inhibit adult emergence, even at 300 Gy. However, irradiation with ${\geq}100Gy$ of puparia induced adult sterility, with no egg production at all. The $ED_{99}$ for inhibition of $F_1$ egg hatchability from adults irradiated with gamma radiation and electron beam radiation was estimated to be 424 and 125 Gy, respectively. The results of the present study suggest that gamma radiation and electron beam radiation are alternatives for phytosanitary treatment. Irradiation with 100 Gy could be suggested as a potential dose for egg, larval, and pupal quarantine treatment of SWD.

• 인간식물환경학회지
• /
• 제23권2호
• /
• pp.171-178
• /
• 2020

The present study was conducted to determine the effects of electron beam irradiation on the postharvest quality of cut flowers. Cut flowers were irradiated with electron beam at 100, 200, 400, 600, 800, 1,000, and 2,000 Gy with a 10 MeV linear electron beam accelerator to evaluate their irradiation tolerance. Postharvest quality was determined by monitoring fresh weight loss, flower longevity, flower diameter, flowering rate, visual quality of flowers and leaves, and chlorophyll content. Cut flowers showed a radiation-induced damage with increasing the irradiation dose. Flower longevity and fresh weight of cut flowers decreased when the irradiation dose was increased. Flower bud opening was also inhibited in a dose-dependent manner. The effective irradiation doses for 10% reduction of postharvest quality (ED₁₀) values were 144.4, 451.6, and 841.2 Gy in the 'Medusa' lily, 'Montezuma' carnation, and 'Rosina White' eustoma, respectively. Although tolerance of cut flowers to electron beam irradiation vary according to species, cultivars, or maturity stage conditions, it is conceivable that 'Montezuma' carnation and 'Rosina White' eustoma could be tolerated and maintained overall postharvest quality up to 400 Gy, the generic irradiation dose approved by the Animal and Plant Health Inspection Service (APHIS) and the International Plant Protection Convention (IPPC) for postharvest phytosanitary treatments.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.41-48
• /
• 2008

본 연구에서는 소나무 원목의 열처리 시 소요에너지에 대해 분석하였다. 소나무재선충 감염목에 대한 적절한 열처리는 소나무 재선충의 감염 확산을 막고, 감염목의 용재로서의 사용 가능성을 높인다. 본 연구에서는 병해충 감염목의 FAO 열처리 기준(International standards for phytosanitary measures (ISPM) No.15)에서 제시한 병해충 사멸 조건인 '목재 중심부 온도를 $56^{\circ}C$에서 30분 유지'를 위하여 소요되는 에너지를 평가하였다. 열처리에 소요되는 총 소요에너지는 초기 열처리 설정조건 도달에 필요한 처리기 벽체 가열, 처리기 내 공기 가열, 목재가열, 습도유지, 벽체 열손실로 구성되는 초기소요에너지와 열처리 설정조건 도달 이후의 열손실 보완 소요에너지, 즉 목재가열, 습도유지 및 처리기 벽체 열손실을 보완하기 위한 열손실 보완 에너지로 구분하였다. 단위시간당 초기소요에너지는 열처리 설정조건 도달 이후의 단위시간당 열손실 보완 에너지량보다 크며, 설정조건도달 이후의 단위시간 당 소요에너지는 거의 일정한 값을 가졌다. 시험결과 실험조건에 있어서 건조 온도와 더불어 상대습도가 매우 큰 영향을 미쳤으며 목재조건으로는 함수율 차이에 의해 변하는 밀도가 큰 영향을 미쳤다. 고온과 높은 상대습도 및 낮은 함수율, 즉 낮은 밀도가 열처리 속도를 증가시켰다. 이 연구를 통하여 소나무재의 열처리에 있어서 보다 효율적인 에너지 관리 방안을 마련할 수 있을 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권6호
• /
• pp.50-56
• /
• 2007

본 연구에서는 각종 병해충 감염목의 열처리 조건으로 목재 중심부 온도를 $56^{\circ}C$에서 30분 이상 처리해야 한다는 FAO 열처리 기준(International standards for phytosanitary measures (ISPM) No. 15)을 적용하여 소나무 재선충 감염의 확산을 막고 감염목을 용재로서 사용할 수 있게 하기 위하여 국산 소나무의 열처리특성을 분석하였다. 온도와 습도 및 함수율별 열처리속도 측정을 통하여 목표온도 도달시간을 분석하고 소비에너지를 평가하여, 열처리 공정 적용 기술개발의 기초 자료를 확보하고자 하였다. 열처리 시 함수율이 높을수록, 직경이 클수록 열처리 소요시간과 소요에너지가 증가하였고, 고온 고습 조건이 열처리 소요시간을 단축시켰다. 열처리기 현장투입 시 적절한 열처리공정 제어를 위해서는 열악한 주위환경 조건, 처리기 가동성능의 변화, 고습적용이 불가능한 상황 등을 고려한 다양한 온도 습도 조건에서의 가열과 냉각 시 소비되는 에너지 평가와 소요시간 예측이 필요하다.