• Geomechanics and Engineering
• /
• v.15 no.5
• /
• pp.1071-1080
• /
• 2018

The study of behavior and values of deformations in the geological medium makes the scientific basis of the methodology of synthesis of true values of parameters of its physico-mechanical and density properties taking into account the influence of geodynamic impacts. The segments of continuous variation of homogeneous elastic uniform deformations are determined under overall compression of the medium. The limits of these segments are defined according to the criteria of instability (on geometric form changes and on "internal" instability). Analytical formulae are obtained to calculate current and limiting (critical) values of deformations within the framework of various variants of small and large initial deformations of the non-classically linearized approach of non-linear elastodynamics. The distribution of deformation becomes non-uniform in the medium while the limiting values of deformations are achieved. The proposed analytical formulae are applicable only within homogeneous distribution of deformations. Numerical experiments are carried out for various elastic potentials. It is found that various forms of instability can precede phase transitions and destruction. The influence of these deformation phenomena should be removed while the physico-mechanical and density parameters of the deformed media are determined. In particular, it is necessary to use the formulae proposed in this paper for this purpose.

• Advances in concrete construction
• /
• v.8 no.3
• /
• pp.199-206
• /
• 2019

High performance sandcretes (HPS) are new concretes characterized by particles having a diameter less than 5 mm, as well as very high mechanical strength and durability. This work consists in finding solutions to make sandcretes with good physico-mechanical and durability properties for this new generation of micro-concrete. However, upgrading ordinary sandcrete into high performance sandcrete (HPS) requires a thorough study of formulation parameters (equivalent water/binder ratio, type of cement and its dosage, kind and amount of super plasticizer, and gravel/sand ratio). This research study concerns the formulation, characterization and durability, in a sulphate environment, of a high performance sandcrete (HPS), made from local materials. The obtained results show that the rheological properties of fresh concrete and mechanical strength differ with the mineralogy, density and grain size distribution of sands and silica fume used.

• Geomechanics and Engineering
• /
• v.19 no.5
• /
• pp.393-405
• /
• 2019

This paper evaluates the geotechnical and geo-engineering properties of the South Pars Zone (SPZ) marls in Assalouyeh, Iran. These marly beds mostly belong to the Aghajari and Mishan formations which entail the gray, cream, black, green, dark red and pink types. Marls can be observed as rock (soft rock) or soil. Marlstone outcrops show a relatively rapid change to soils in the presence of weathering. To geotechnically characterise the marls, field and laboratory experiments such as particle-size distribution, hydrometer, Atterberg limits, uniaxial compression, laboratory direct-shear, durability and carbonate content tests have been performed on soil and rock samples to investigate the physico-mechanical properties and behaviour of the SPZ marls in order to establish empirical relations between the geo-engineering features of the marls. Based on the experiments conducted on marly soils, the USCS classes of the marls is CL to CH which has a LL ranging from 32 to 57% and PL ranging from 18 to 27%. Mineralogical analyses of the samples revealed that the major clay minerals of the marls belong to the smectite or illite groups with low to moderate swelling activities. The geomechanical investigations revealed that the SPZ marls are classified as argillaceous lime, calcareous marl and marlstone (based on the carbonate content) which show variations in the geomechanical properties (i.e., with a cohesion ranging from 97 to 320 kPa and a friction angle ranging from 16 to 35 degrees). The results of the durability tests revealed that the degradation potential showed a wide variation from none to fully disintegrated. According to the results of the experiments, the studied marls have been classified as calcareous marl, marlstone and argillaceous lime due to the variations in the carbonate and clay contents. The results have shown that an increase in the carbonate content leads to a decrease in the degradation potential and an increase in the density and strength parameters such as durability and compressive strength. A comparison of the empirical relationships obtained from the regression analyses with similar studies revealed that the results obtained herein are reasonably reliable.