• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제3권2호
• /
• pp.137-142
• /
• 1999

One of the most important parameters required to model the absorption of CO2 into aqueous alkanolamine solutions is physical solubility. However, since CO2 reacts in amine solutions, its physical solubility cannot be measured directly. As a result, a nonreacting gas which is similar to CO2 has to be used such as N2O. The solubility of nitrous oxide (N2O) in aqueous solutions of 0wt%-50wt% MDEA, 0wt%-30wt% DEA, and 50wt % total amine with DEA/MDEA molar ratios of 0.05, 0.25, 0.5 and 0.67 was measured using a modified Zipperclave reactor over a temperature range of 293-353 K with near atmospheric partial pressures of N2O. the solubility data from this work were K with near atmospheric partial pressures of N2O. The solubility data from this work were found to be in good agreement with previously reported data where available.

• 대한소아치과학회지
• /
• 제51권2호
• /
• pp.140-148
• /
• 2024

This study aimed to enhance the physicochemical properties of sodium iodide-based root filling materials, particularly solubility. In earlier developmental stages, the iodoform-containing paste exhibited high antibacterial efficacy but failed to meet only the solubility requirement among the ISO 6876 criteria. Therefore, this study focused on enhancing the physicochemical properties of the paste under development, particularly centering on reducing its solubility. Four experimental groups were established, including three control group. The previously developed D30 paste was named the Oil 33 group, and the control group was named the Vitapex^® group. The Oil 50 group, in which the oil content was increased, and the Oil 45L group, in which lanolin was incorporated. The physical properties (solubility, pH, flowability, and film thickness) of the four pastes were evaluated according to the ISO 6876 standards. No significant differences were observed between the Oil 45L and Vitapex^® groups in any of the physical property evaluations. While the Oil 33 and Oil 50 groups met the ISO 6876 standards for flowability and film thickness, the Oil 45L group met all the physical properties. However, reducing the overall oil content may be necessary to enhance the antimicrobial properties. The result of the physicochemical experiments showed that the Oil 45L group with the newly formulated composition and incorporated lanolin exhibited low solubility meeting the ISO 6876 standard of ≤ 3%. We were able to develop a paste with more stable solubility than previous iodide-based root-filling materials. Therefore, the oil content must be further adjusted to improve its antimicrobial properties. If other physical properties also meet the ISO 6876 standards and demonstrate excellent results in cytotoxicity tests, this root filling material could potentially replace existing options.

• Corrosion Science and Technology
• /
• 제7권4호
• /
• pp.237-242
• /
• 2008

Physical properties of water, such as dielectric constant and ionic product, significantly vary with the density of water. In the supercritical conditions, since density of water widely varies with pressure, pressure has a strong influence on physical properties of water. Dielectric constant represents a character of water as a solvent, which determines solubility of an inorganic compound including metal oxides. Dissociation equilibrium of an acid is also strongly dependent on water density. Dissociation constant of acid rises with increased density of water, resulting in drop of pH. Density of water and the density-related physical properties of water, therefore, are the major governing factors of corrosion and environmentally assisted cracking of metals in supercritical aqueous solutions. This paper discusses importance of "physical properties of water" in understanding corrosion and cracking behavior of alloys in supercritical water environments, based on experimental data and estimated solubility of metal oxides. It has been pointed out that the water density can have significant effects on stress corrosion cracking (SCC) susceptibility of metals in supercritical water, when dissolution of metal plays the key role in the cracking phenomena.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권4호
• /
• pp.241-247
• /
• 2000

This paper reports on an experimental study of the absorption of COS in a secondary amine diethanolamine. The primary objectives were to investigate an analogy between $N_2$O and COS, thereby allowing an estimation of the physical solubility and diffusivity of the sulfur gases in the reacting amine solutions. The solubilities and diffusivities of $N_2$O and COS in 5~25% aqueous polyethylene glycol at $25^{\circ}C$ were measured. The results appeared to verify the use of an $N_2$O-COS analogy for estimating the solubility and diffusivity of COS in aqueous solutions of alkanolamines up to an approximate 25 weight % concentration. The mean deviation of the $N_2$O analogy relative to the measured solubilities was 3.7%, and the mean deviation between the analogy and the measured diffusion coefficients using the experimental values for Hcos/PEG was 14.6%.

• 대한화학회지
• /
• 제53권4호
• /
• pp.453-465
• /
• 2009

본 연구에서는 한 가지 염으로 포화된 수용액에 다른 염을 녹이면 얼마나 녹을 것인가에 대한 초-중등 학생들과 교사들의 이해 정도가 낮은 이유를 알아보기 위하여 중등학교 교과서와 대학교 교재의 서술 내용을 조사하였다. 그 결과 중등학교 교과서와 대학교 일반화학 교재에서는 다른 염의 존재 여부와 상관없이 용해도는 일정함을 전제로 서술하고 있었으며, 대학교 물리화학 교재에서는 다른 염의 존재에 의해 용해도가 달라짐을 직접 언급하거나 이를 알 수 있는 내용이 서술되어 있었다. 그러나 물리화학을 이수한 사범대학 4학년 학생들을 대상으로 조사해본 결과 학생들의 대부분이 이러한 용해도 변화에 대한 설명을 하지 못하였다. 따라서 교사나 예비 교사들의 의문을 해소하기 위해 이온쌍 형성과 이온 세기 변화에 따른 용해도의 변화를 설명하고, 실제 실험 결과도 하나 제시하였다. 하지만 중등학교에서는 활동도 개념의 도입이 어려우므로 두 가지 염이 동시에 용해될 때의 용해도를 어떻게 가르칠지에 대한 논의가 필요한 것으로 생각된다.

• Archives of Pharmacal Research
• /
• 제20권6호
• /
• pp.560-565
• /
• 1997

The physicochemical properties of melatonin (MT) in propylene glycol (PG) and 2-hydroxypropyl-.betha.-cyclodextrin $(2-HP{\beta}CD)$ vehicles were characterized. MT was endothermally decomposed as determined by differential scanning calorimetry (DSC). Melting point and heat of fusion obtained were $116.9{\pm}0.24^{\circ}C $.and $7249{\pm}217 cal/mol$., respectively. MT as received from a manufacture was very pure, at least 99.9%. The solubility of MT in PG solution increased slowly until reaching 40% PG and then steeply increased. Solubility of MT increased linearly as concentration of $2-HP{\beta}CD$ without PG INCREASED$(R^2=0.993)$. MT solubility in the mixtures of pg and $2-HP{\beta}CD$ also increased linearly but was less than the sum of its solubility in $2-HP{\beta}CD$ and PG individually. The MT solubility was low in water, simulated gastric or intestinal fluid but the highest in the mixture of PG(40v/v%) and $2-HP{\beta}CD$ (30w/v%) although efficiency of MT solubilization in $2-HP{\beta}CD$ decreased as the concentration of PG increased. MT was degraded in a fashion of the first order kinetics $(r^2>0.90)$. MT was unstable in strong acidic solution (HCl-NaCl buffer, pH 1.4) but relatively stable in other pH values of 4-10 at $70^{\circ}C$. In HCl-NaCl buffer, MT in 10% PG was more quickly degraded and then slowed dpwm at a higher concentration. However, the degradation rate constant of MT in 2-HP.betha.CD was not changed significantly when compared to the water. The current studies can be applied to the dosage formulations for the purpose of enhancing percutaneous absorption or bioavailability of MT.

• Journal of Pharmaceutical Investigation
• /
• 제10권3호
• /
• pp.33-45
• /
• 1980

In order to increase the solubility of metoclopramide, various ratio coprecipitates with polyvinylpyrrolidone (M.W. 40,000) were prepared. The experiments of the solubility, physicochemical characteristics were quantitatively developed. The solubility increased as the ratio of rnetoclopramide to polyvinylpyrrolidone in metoclopramide-polyvinylpyrrolindone coprecipitate increased. In powder state, the dissolution rate of metoclopramide-polyvinylpyrrolidone coprecipitate was greater than that of metoclopramide and metoclopramide-polyvinylpyrrolidone physical mixture. Dissolution characteristics of non-disintegrating disk with constant surfacearea was in accord with Noyes-Nernst equation. The intrinsic dissolution rate, G, at $37^{\circ}C$ was $3.98{\times}10^{-7}M/cm^2{\cdot}min$ for metoclopramide, $2.26{\times}10^{-6}\;M/cm^2{\cdot}min$ for 1 : 5 metoclopramide-polyvinylpyrrolidone coprecipitate, respectively. Accordingly, activation energy of metoclopramide was 15,061cal/M, 9,178cal/M for 1 : 5 metoclopramide-polyvinylpyrrolidone coprecipitate and the activation energy decreased as the coprecipitate was formed. X-ray diffraction study revealed the fact that metoclopramide was crystalline, in contrast, there was no crystallinity evident in the 1 : 5 metoclopramide-polyvinylpyrrolidone coprecipitate. There was no difference between physical mixture and coprecipitate in TLC, UV and NMR studies. From the comparision between physical mixture and coprecipitate in IR spectrum, the interaction such as association between metoclopramide and polyvinylpyrrolidone was considered. But the association was easily dissociated in methanol solution.

• Journal of Pharmaceutical Investigation
• /
• 제27권3호
• /
• pp.199-205
• /
• 1997

In order to formulate biphenyl dimethyl dicarboxylate(DDB) aqueous solutions, the effects of various solubilizing agents such as cosolvents(PG, PEG 400, glycerin, ethanol), surfactants,$(poloxamer\;407,\;Cremophor^{\circledR}\; RH40,\;Solutol^{\circledR},\;Tween\;80,\;sodium\;lauryl\;sulfate)$, complexation agent$(CELDEX^{\circledR}\;CH-20)$ and others(urea, niacinamide, propylene carbonate, HPMC) on the solubility of DDB in water were evaluated. The solubility of DDB in water was about $0.21\;{\mu}g/ml\;at\;20^{\circ}C$, while its solubility in PEG 400 was 5,000 times higher than that in water. 60% PEG 400 aqueous solution was selected as an optimum solvent system, and surfactants or other solubilizing agents were added to prevent DDB from recrystalization. The addition of surfactants in water increased the solubility of DDB from 15- to 34-fold, however, $CELDEX^{\circledR}\;CH-20$ and other agents studied showed negligible effects on the solubility of DDB in water. The 60% PEG 400 aqueous solution containing 5% $Cremophor^{\circledR}$　RH40 was appeared as the formula of choice. It showed acceptable physical stability after stored for 7 days at $4^{\circ}C$.

• 청정기술
• /
• 제21권2호
• /
• pp.124-129
• /
• 2015

본 연구에서는 5~30 bar의 이산화탄소에 대한 DMPEG250 (dimethyl ether of polyethylene glycol), DEC (diethyl carbonate), DMC (dimethyl carbonate), 그리고 TAT (triacetin)의 용해도를 측정하기 위해 일정 부피법에 따른 용해도 측정 장치를 사용하였다. 이들에 대한 이산화탄소 용해도는 측정된 부피와 압력을 Peng-Robinson 방정식에 대입하여 얻은 이산화탄소의 몰수로부터 얻어졌다. 이산화탄소에 대한 물리 흡수제의 용해도는 같은 온도에 대해 DMPEG250 > TAT > DEC > DMC 순으로 나타났다. DMPEG250에 DEC를 혼합한 물리 흡수제를 사용할 경우 이산화탄소에 대한 용해도는 DMPEG250 단독에 의한 경우보다 높은 값을 가지는 것으로 확인되었다. 그러므로 DEC가 혼합된 DMPEG250/DEC 혼합 물리 흡수제는 기존의 DMPEG250이 가지는 높은 비용을 절감할 수 있을 뿐 아니라 용해도 향상까지 거둘 수 있어 향후 연소 후 이산화탄소 포집 공정에 효과적인 적용을 기대할 수 있다.

• Food Science and Biotechnology
• /
• 제18권6호
• /
• pp.1439-1446
• /
• 2009

The surfaces of different-sized endosperm, bran, and husk rice powders were modified using carboxymethylation. Carboxymethylation was carried out using aqueous alkalization and neutralization. After the carboxymethylation process, the centrifuged products were milled and classified by size: particles passed through sieves of 45, 106, and $300-{\mu}m$ width. The effect of carboxymethylation on physical properties such as solubility and dispersibility of endosperm, bran, and husk particles were studied. Overall, carboxymethylation increased solubility of the particles, while size reduction increased dispersibility. In particular, carboxymethylation created good aqueous suspensions by minimizing interparticle agglomeration. Our results show that the combination of size reduction and carboxymethylation improves solubility and dispersibility, resulting in better stability of the suspension. This study may be helpful for expanding the use of rice and its byproducts as ingredients in a variety of food and beverage applications.