• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.423-429
• /
• 2012

This study investigated purchasing practice and size satisfaction to offer basic data to establish a marketing strategy and produce down-aging clothes for females in their 40s-50s. For the data analysis, crosstabs, factor analysis, and one-way ANOVA were used. The results were as follows; first, middle-aged women were observed to purchase down-aging clothes "to look younger" and not purchase clothes "due to the lack of right sizes." For women who answered to 'not purchase clothes', they also acknowledged that they intended to purchase down-aging clothes in the future if the right size is available. Second, people in their early 40s significantly considered perceptual qualities such as fashion and brand names while people in their late 50s placed the most importance in practicality and wearability. For body shapes, people with overweight body types were found to significantly consider physical performance, practicality, and wearability. Third, the examination of purchase satisfaction levels by age groups showed that younger age groups had high satisfaction level for wear functionality related items that included size and activity however, the late 50s group had the lowest satisfaction level. Middle-aged women purchased clothes to look younger however, they simultaneously wear clothes that are plain and conservative or respectable and graceful. Therefore, the development of products reflect the analysis of designs that can help create a more youthful appearance and women's preferred styles are needed in addition to the establishment of a differentiated sizing system for middle-aged female consumers in the incorporation of the characteristics of middle-aged women's body parts.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.7
• /
• pp.721-727
• /
• 2010

The spontaneous ignition of coal stockpile causes serious safety and economic problems. Such spontaneous ignition occurs in coal stockpile when the rate of heat released by the oxidation of coal is greater than the rate of heat lost to the surroundings. In this study, a two-dimensional unsteady model is adopted for studying spontaneous ignition and the numerical results are compared with experimental results. The numerical results are in a good agreement with the experimental ones. Depending on the porosity, the internal maximum temperature, pressure, and oxygen mass fraction during spontaneous ignition are investigated. On the basis of the numerical results, the transient temperature variations for several shapes of coal stockpiles are analyzed. Further, the physical mechanisms of hot-spot formation and spontaneous ignition are analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.647-652
• /
• 2008

This paper focused on the application of finite element model updating technique to evaluate the structural properties of the reinforced concrete specimen using the data collected from shaking table tests. The specimen was subjected to six El Centro(NS, 1942) ground motion histories with different Peak Ground Acceleration(PGA) ranging from 0.06g to 0.50g. For model updating, flexural stiffness values of structural members(walls and slabs) were chosen as the updating parameters so that the converged results have direct physical interpretations. Initial values for finite element model were determined from the member dimensions and material properties. Frequency response functions(i.e. transfer functions), natural frequencies and mode shapes were obtained using the acceleration measurement at each floor and given ground acceleration history. The weighting factors were used to account for the relative confidence in different types of inputs for updating(i.e. transfer function and natural frequencies). The constraints based on upper/lower bound of parameters and sensitivity-based constraints were implemented to the updating procedure in this study using standard bounded variable least-squares(BVLS) method. The veracity of the updated finite element model was investigated by comparing the predicted and measured responses. The results indicated that the updated model replicates the dynamic behavior of the specimens reasonably well. At each stage of shaking, severity of damage that results from cracking of the reinforced concrete member was quantified from the updated parameters(i.e. flexural stiffness values).

• The Research Journal of the Costume Culture
• /
• v.26 no.5
• /
• pp.665-678
• /
• 2018

The purpose of this study is to promote the elderly apparel industry for the increasing numbers of elderly obese male population. In the study, a total number of 249 males between the ages of 60 to 85 were studied to analyze their body types and differences. The group had a Rohrer Index of 1.6 or higher and BMI of 25 or higher. The noticeable physical differences in the group were shorter waist front length, bigger waist and hip circumferences with increasing age and slimmer limbs that are associated with the natural aging process with or without obesity. The obese body types have been classified in the following 3 different categories. Type 1 is the group that has lower body obesity with broad shoulders and relatively slimmer abdomen than a heavy bottom. A total number of 84 people belonged to the type 1 obesity category which makes up 33.8% of the total. Type 2 is the group that has upper body obesity with especially large abdominal obesity. A total number of 76 people, 30.5% of the total, were classified as type 2. Type 3 is the group that has whole body obesity with balanced obesity in the whole body. A total number of 89 people, 35.7% of the total, made up type 3.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.1
• /
• pp.128-141
• /
• 1996

The pourpose of this study is to determine the exact size which can be the basic elements of the fashion design with the measurement of middle-aged women's body, and to grasp the peculiar tomato type of the middle-aged women by compacting each measurement and examing the change of body shape. Making 215 house wives about 40 to 55 years old the subject of this research, we measured the body size from June to August, 1994. After analyzing the data through the 43 item.; of the body measurement, grasping the characteristics of the tomato type, we classified three types of physical standard and looked into the element of body structure. The results were as follows; 1. The average Rohrer index of middle-aged women in Tas-gu is about 1.5 and they usually seem to be fat compared with other groups. 2. Age has much influence on the body change of middle-aged women. Especially around 45 years old, the body change showed remarkable. 3. When analyzing the elements of the body measurement, the biggest elements of middle -aged women's body structure are in the items of width, thickness and girth related to the expansion of body line. Therefore in the middle age, the thickness and the girth have more influence on the human body than the height and the length, so the items of thickness and girth is the most important factor in the somato type. 4. In the slim body and standard body, the thirst factor is the items of height and length related to vertical size and the second is the items of width and thickness and girth. In ice fat body the first factor is the items of width, thickness, girth and the second is those of height, length. Unlike other body shapes, the fat body has many factors, which shows that the fat body has much variation in each part in proportion to fatness.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.7
• /
• pp.725-731
• /
• 2008

This paper focused on the application of finite element model updating technique to evaluate the structural properties of the reinforced concrete specimen using the data collected from shaking table tests. The specimen was subjected to six El Centre (NS, 1942) ground motion histories with different peak ground acceleration (PGA) ranging from 0.06 g to 0.50 g. For model updating, flexural stiffness values of structural members (walls and slabs) were chosen as the updating parameters so that the converged results have direct physical interpretations. Initial values for finite element model were determined from the member dimensions and material properties. Frequency response functions (i.e. transfer functions), natural frequencies and mode shapes were obtained using the acceleration measurement at each floor and given ground acceleration history. The weighting factors were used to account for the relative confidence in different types of Inputs for updating (j.e. transfer function and natural frequencies) The constraints based on upper/lower bound of parameters and sensitivity-based constraints were implemented to the updating procedure in this study using standard bounded variable least-squares(BVLS) method. The veracity of the updated finite element model was investigated by comparing the predicted and measured responses. The results indicated that the updated model replicates the dynamic behavior of the specimens reasonably well. At each stage of shaking, severity of damage that results from cracking of the reinforced concrete member was quantified from the updated parameters (i.e. flexural stiffness values).

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.5
• /
• pp.67-73
• /
• 2017

We propose several techniques which can be employed in a 3D fitness program for monitoring and correcting user's posture. To implement a 3D fitness program, improved reference motion generating techniques and visualizing techniques are necessary. First, in order to understand the difference between the user and the reference movement of a professional, a retargeting method between two different body shapes are studied. Second, the problem of self-occlusion, which occurs when using a low-cost depth sensor to represent complex motions, is solved by using a sample database and time consistency. The system proposed in this paper evaluates the user's posture considering the physical characteristics of the user, and then provides feedback to the user.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.19-27
• /
• 2015

As the recent regulation of Internaional Maritime Organization (IMO) is enforced, the advanced technology of Ballast water treatment system (BWTS) is needed to meet its requirements. Until now, there are two kinds of the BWTS technologies such as physical methods (Membrane and UV) and chemical methods (Chlorin and Ozone). However, these conventional methods have some limitations of auxiliary power, low productivity, residual treatment and etc. In order to overcome these problems, this paper introduces the new kind of BWTS based on mechanical principle and investigates the effect of rotating disc shapes on flow characteristics between rotating and stationary discs by computational fluid dynamics (CFD). Planar and Step types can make the local cavitation generated along radius, and Circular type can increase the intensity of shear stress.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.351-358
• /
• 2018

In this study, we propose a method of suppressing the leakage noise signal of motor assembly through the test. The motor assembly is mounted on outside of the aircraft to rotate an antenna and must satisfy RE102 requirement on MIL-STD-461F in terms of electromagnetic interference. It is confirmed by RE102 test result hat the leakage noise signal of the equipment occurs due to external influx through the power and control cable and rotation of the motor. And it is ascertained that the part where internal/external physical shielding is difficult to rotate is the leakage path. To reduce the leakage noise signal, the electrical ground reinforcement and the electric shielding structure considering the operation of the equipment is applied and it is verified that the requirement is satisfied. Finally, we verified that required specification are met by applying circular corrugated choke with interlocking shapes and conductive grease to the noise leakage path.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.369-374
• /
• 2005

In this work, the calcium alginate microcapsules containing lemon oil were prepared by emulsification-internal gelation and their potential use as aromatherapy was examined by the controlled release system. The lemon oil encapsulated in the alginate was successfully observed by Fourier transform (FT-IR) spectroscopy and differential scanning calorimeter (DSC) measurements. Analysis of the diameters and shapes of microcapsules was conducted by scanning electron microscopy (SEM). The mean diameters ranging from 4 to 7 um and encapsulation yield ranging from 50 to $85\%$ were obtained. The controlled release of the lemon oil at $37^{circ}$ was demonstrated by the infrared moisture determination (IMDB). It was found that the amount of released lemon oil decreased with increasing concentrations of alginate and $CaCl_2$ due to the higher the cross-linking density of the capsules prepared. The oil release from the capsule was measured as a function of physical force. We confirmed that the external factor could control the collapse of capsule wall and the release rate.