• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1017-1025
• /
• 2013

The monolithically coupled finite element analysis for a deformable unsaturated soil slope is performed to investigate matric suction distribution on a soil slope subjected to rainfall infiltration, which can consider the hydraulic-mechanical characteristics for the analysis. The soil-water characteristic curves (SWCC) are experimentally determined to estimate three types of hydraulic properties of domestic areas. Based on the physical properties, the distribution of matric suction is investigated by considering the major factors, such as soil conditions, rainfall intensities, and slope angles. It is found from the results of this study that the matric suction rapidly decreases with an increase in rainfall intensity, regardless a slope angle. The slope surface is more easily saturated when its saturated hydraulic conductivity is smaller than rainfall intensity, and for the case of multi-layered soil slope, hydraulic characteristics of slope surface has a significant influence on matric suction distribution.

• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.175-179
• /
• 2016

In this study, we evaluated the reusable leuco malachite green (LMG) micelle gel properties dependent on various components of chemical concentration and compared with leuco crystal violet (LCV). The gels were delivered to 10, 20, 30, 40 and 50 Gy at 6 MV photon beam from linear accelerator and analyzed using spectrophotometry. We confirmed that the reusable LMG and LVC absorbance wavelength peak were made up at 630 nm and 600 nm respectively. The transparency of reusable LMG decreased with higher amount of trichloroacetic acid (TCAA) and lower reusable LMG dyes. 1 mM reusable LMG was the lowest transparency. The sensitivity was increased depending on lower trichloroacetic acid (TCAA) concentrations and the amount of suitable surfactant (Triton X-100), which was found to be 7 mM. However, we were not able to investigate sensitivity effects factor from reusable LMG dyes. The gel dosimeter containing 16 mM TCAA, 7 mM Triton X-100 gel dosimeter showed the highest sensitivity at $0.0021{\pm}0.0001cm^{-1}.Gy^{-1}$. The sensitivity of LCV was found to be higher than reusable LMG at $0.0037{\pm}0.0005cm^{-1}.Gy^{-1}$. The reusable LMG and LCV dose responses were shown to be $R^2=0.997$, $R^2=0.999$ respectively, as stable measurement results. Future research is necessary to improve dose sensitivity, dose rate dependency and gel fading with extensive chemical formulations.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.7
• /
• pp.89-97
• /
• 2020

Container vessels continue to grow in size, led by global shipowner. Large ships can be loaded more cargo at a time, reducing the cost of transportation per teu. this eventually leads to economies of sale, in which the production cost per unit decreases with increasing output. in accordance with the 70th Convention of the Marine Environment Protection Committee of the International Maritime Organization, as of January 1, 2020, MARPOL Annex VI Regulation 14.1.3 will be effective. All vessels must be meet these criteria to reduce Sox emissions and reduce NOx emissions by reducing the content of manned sulfur oxides from 3.5% to less than 0.5%, otherwise IACS Member States Entry to the port is denied. in order to do that need to LNG storage tank. in this study characteristic of the material after line heating (600℃,700℃,800℃,900℃) of 9% Ni steel used in the manufacture of LNG fuel tank of ship were verified using by mechanical test. In the heating method by line heating. The initial properties of steel are changed by variables such as temperature, time, speed. The experimental data of line heating presented in this paper confirmed that the initial change of 9% Ni steel could be minimized.

• Korean Journal of Human Ecology
• /
• v.13 no.1
• /
• pp.91-96
• /
• 2004

Effects of irradiation on physical and chemical properties of chicken were investigated. Chicken was irradiated at dose levels of 0, 0.5, 1, 3 and 5 kGy using Co60 source. Irradiation increased drip loss and TBA value. Irradiation decreased L value, and increased a value and b value, indicating that irradiation made chicken darker, more reddish and more yellowish. Irradiation induced the degradation in salt-soluble protein, not water-soluble protein. Any differences in color, odor and tenderness between irradiated and non-irradiated chicken were not perceived by sensory panels.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.353-358
• /
• 1985

Three kinds of aqueous solution of tobacco extracts are used as a new experimental material. It is measured how the operating condition, freezing point, viscosity as fundamental properties have the relation to concentration and temperature of the solution. The results of this study are obtained as follows. 1) The freezing point of the solution $(t_m)$ is presented; $t_m=-{\frac{18.6X}{170-{\frac{X}{100}}(170+18)}}$ 2) The correlation of the viscosity, the temperature and the concentration of the solution is followed; $log_{10{\mu}}={\frac{1585}{T}}+2.11{\frac{X}{100-X}}-5.50$ 3) The ice crystals whose circumference is a toothed wheel are made from high concentrated solution, and the thick plate shaped ones are done from the low concentrated solution.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1832-1838
• /
• 2015

Carrot powder was added at different levels (0, 5, 10, 15, and 20%) to Perilla-Dasik, and its effects on the physical and antioxidant properties of Dasik were measured. For texture characteristics, hardness, cohesiveness, and chewiness of Dasik slightly increased as carrot powder content increased. For color properties, both $a^*$ (redness) and $b^*$ (yellowness) values increased as carrot powder content increased. Anti-oxidative effects, as measured by acid value, peroxide value, and free radical scavenging activity, were greater in samples containing carrot powder compared to control. In the sensory test, Dasik with carrot powder was more preferred than control (without carrot powder). Based on these results, 20% addition of carrot powder in the formulation was the most acceptable for Dasik.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.93-103
• /
• 2015

Residential environment is not only the physical aspects affected by the unique characteristics of the residents, social, economic, cultural, etc. are closely related to many environmental factors. This research is based on choice attribute theory that substantially explains how housing choice attributes affect loyalty via image, perceived value in Secho. This paper investigate empirically relationship between selection properties of residential environment and loyalty, moderating effect of image and perceived value. Results were computed using SPSS 20.0 statistical analysis programs. The results are summarized as follows. First, The elements of choice attribute are divided into six factor, such as regional reputation, green environment, convenience, property value, safety, housing status. In the results of the analyses, housing choice properties gives a positive influence to the loyalty. Second, testing its mediating role, I use the three regression equation models by Baron and Kenny. When the mediator effect of image, perceived value was represented, the effect of image and perceived value was statistically significant. Thus, the mediating role of image and perceived value was supported. It means the higher image and perceived value can enhance loyalty of Secho.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.178-178
• /
• 2010

With the scaling down of ULSI(Ultra Large Scale Integration) circuit of CMOS(Complementary Metal Oxide Semiconductor)based electronic devices, the electronic devices become more faster and smaller size that are promising field of semiconductor market. However, very narrow line width has some disadvantages. For example, because of narrow line width, deposition of conformal and thin barrier is difficult. Besides, proportion of barrier width is large, thus resistance is high. Conventional PVD(Physical Vapor Deposition) thin films are not able to gain a good quality and conformal layer. Hence, in order to get over these side effects, deposition of thin layer used of ALD(Atomic Layer Deposition) is important factor. Furthermore, it is essential that copper atomic diffusion into dielectric layer such as silicon oxide and hafnium oxide. If copper line is not surrounded by diffusion barrier, it cause the leakage current and devices degradation. There are some possible methods for improving the these secondary effects. In this study, TaNx, is used of Tertiarybutylimido tris (ethylamethlamino) tantalum (TBITEMAT), was deposited on the 24nm sized trench silicon oxide/silicon bi-layer substrate with good step coverage and high quality film using plasma enhanced atomic layer deposition (PEALD). And then copper was deposited on TaNx barrier using same deposition method. The thickness of TaNx was 4~5 nm. TaNx film was deposited the condition of under $300^{\circ}C$ and copper deposition temperature was under $120^{\circ}C$, and feeding time of TaNx and copper were 5 seconds and 5 seconds, relatively. Purge time of TaNx and copper films were 10 seconds and 6 seconds, relatively. XRD, TEM, AFM, I-V measurement(for testing leakage current and stability) were used to analyze this work. With this work, thin barrier layer(4~5nm) with deposited PEALD has good step coverage and good thermal stability. So the barrier properties of PEALD TaNx film are desirable for copper interconnection.

• Polymer(Korea)
• /
• v.28 no.2
• /
• pp.185-193
• /
• 2004

Elastomeric nanocomposites were prepared by employing zinc dimethacrylate into an acrylonitrile-butadiene rubber, and their network structures, mechanical properties, and fracture morphologies were investigated according to the adding methods and contents of zinc dimethacrylate. The total crosslink density increased with increasing the zinc dimethacrylate level, due to increased ionic bonds. Both the tensile strength and tear strength increased with increasing zinc dimethacrylate loadings, and then decreased after reaching a maximum value. It was found that the tear strength and crack resistance were greatly affected by the mixing method of zinc dimethacrylate. The in-situ nanocomposites, where zinc dimethacrylate particles were formed by the reaction of zinc oxide and methacrylic acid, showed much improved tear strength and crack resistance compared to those of the nanocomposites based on the direct mixing of zinc dimetacrylate powders. This was because of the finer zinc dimethacrylate particles and improved dispersion of the in-situ nanocomposites.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.213-219
• /
• 2014

The rheological characteristics of highly concentrated polymer bonded explosive simulant were studied. Hydroxyl terminated polybutadiene (HTPB) and polyethylene plastomer (Exact) were used as binders. Sugar and Dechlorane particles whose physical properties are similar to research department explosive (RDX) were used as fillers. When HTPB was used, diethyl hexyl adipate (DEHA or DOA) was used as a plasticizer together for some cases. Highly concentrated suspensions were mixed in a batch melt mixer (Rheomixer 600, Haake) and rheological properties were measured by plate-plate and capillary rheometers. Wall slip phenomena, thixotropy with shear hysteresis, and flow instability were investigated as shear rate and amount of fillers changed.