• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.814-818
• /
• 2008

Com and rice starches were physically modified by planetary mill. While native starches showed high peak viscosities (1,001 and 563 cp), it decreased largely (42 and 20 cp for rice and com starch, respectively) after 2 hr of physical modification. When two starches were co-ground, peak viscosities decreased more largely than single ground one only in 30 min, indicating the pasting properties could be easily changed by co-grinding. Especially, the higher the amount of com starch, the viscosity decreased more largely, which means that paste stability could be controlled also by changing the ratio of com and rice starch. Mean particle size increased with physical modification time since particles became spread because of shear force. There were also changes in surface morphology after physical modification. Fluid property, such as mean time to avalanche (MTA), was improved (from $6.16{\pm}0.47$ and $8.37{\pm}1.23\;sec$ to $5.47{\pm}0.78$ and $5.26{\pm}1.37\;sec$ for rice and com starch, respectively) by physical modification. Pasting property, such as swelling power, was also improved by physical modification. These mean that native starches can be applied to both conventional powder and new paste-food industry more efficiently by physical modification.

• Membrane and Water Treatment
• /
• v.1 no.2
• /
• pp.103-120
• /
• 2010

Surface modification of microfiltration and ultrafiltration membranes has been widely used to improve the protein adsorption resistance and permeation properties of hydrophobic membranes. Several surface modification methods for converting conventional membranes into low-protein-binding membranes are reviewed. They are categorized as either physical modification or chemical modification of the membrane surface. Physical modification of the membrane surface can be achieved by coating it with hydrophilic polymers, hydrophilic-hydrophobic copolymers, surfactants or proteins. Another method of physical modification is plasma treatment with gases. A hydrophilic membrane surface can be also generated during phase-inverted micro-separation during membrane formation, by blending hydrophilic or hydrophilic-hydrophobic polymers with a hydrophobic base membrane polymer. The most widely used method of chemical modification is surface grafting of a hydrophilic polymer by UV polymerization because it is the easiest method; the membranes are dipped into monomers with and without photo-initiators, then irradiated with UV. Plasma-induced polymerization of hydrophilic monomers on the surface is another popular method, and surface chemical reactions have also been developed by several researchers. Several important examples of physical and chemical modifications of membrane surfaces for low-protein-binding are summarized in this article.

• Journal of Korean Academy of Nursing
• /
• v.43 no.3
• /
• pp.331-340
• /
• 2013

Purpose: The purpose of this study was to investigate the effects of the lifestyle modification coaching program on self efficacy, lifestyle and physiologic indexes related to the recurrence of stroke in patients with stroke. Methods: Sixty-one patients with stroke registered with a stroke center participated in this study. Of the participants, 32 were assigned to the experimental group and 29 to the control group. Self efficacy, alcohol drinking, smoking, physical activity, BMI (body mass index), WHR (waist-hip ratio), blood lipid level, and blood pressure were measured both for the baseline, as well as after intervention. The lifestyle modification coaching program consisted of an 8-week telecoaching session following face-to-face education. The control group received only the face-to-face education. Results: There were significant differences in physical activities, WHR, blood pressure within and between groups after intervention. The lifestyle modification coaching program had significant influences on blood pressure even after gender, age, and physical activity had been adjusted. Conclusion: The results of the study indicate that lifestyle modification coaching program is effective for physical activity, abdominal obesity and blood pressure. Therefore it can be used by nurses in hospitals and communities as one of the secondary stroke prevention programs for patients with stroke.

• Child Health Nursing Research
• /
• v.7 no.3
• /
• pp.308-321
• /
• 2001

Behavior modification is an approach to decrease degree of obesity through changing maladaptive eating habit and life style. It produces small amount of weight loss but it has few side effects and low dropout rate. It also has great effectiveness on maintenance of decreased weight. This study was performed to investigate effects of behavior modification on physical variables, fat and thin habit, and self-esteem in obese elementary school children. Sixty two students of 4th, 5th, and 6th grade were selected from two elementary schools located in the suburbs of Seoul. Thirty four children in one school were assigned to experimental group and twenty eight children in another school were assigned to control group. All subjects were healthy and were not on any type of obesity control. Behavior modification, in this study, was consisted of introduction, self-monitoring and stimuli control, education about diet and physical activities, individual counseling and reinforcement, requesting personal assistance, cognitive restructuring, and closing and long-term planning. Experimental group was received 60～70 minutes of behavior modification once a week for 8 weeks from October 16 to December 22, 2000. Control group was not received any intervention. Data were collected before and after intervention by measuring physical variables, fat and thin habit, and self-esteem. Physical variables consisted of obesity index, skinfold thickness, body fat(percentage of body fat, fat mass, fat free mass), serum lipids(total cholesterol, HDL-C, LDL-C, triglyceride) and serum leptin. The results were as follows ; 1. physical variables 1) Obesity index of the experimental group was significantly decreased after behavior modification. But there was no significant difference between two groups. 2) The increase of skinfold thickness was significantly low in the experimental group compared to the control group. 3) Percentage of body fat and fat mass were significantly decreased in the experimental group. Fat free mass was significantly increased in the experimental group. 4) Total cholesterol, HDL-C, triglyceride and serum leptin between the experimental group and control group showed no significant difference. LDL-C was significantly decreased in the control group. 2. Thin habit score was significantly increased in the experimental group. In subcategories of habit, thin scores of life style, attitude, social relationship, nutrition were signifi- cantly increased in the experimental group. 3. Self-esteem score was significantly increased in the experimental group. These results indicate that behavior modification is effective in decreasing percentage of body fat and fat mass, in less increasing skinfold thickness and in increasing fat free mass, thin habit, and self-esteem. In conclusion, behavior modification can be used as safe and effective strategy for managing obesity in elementary school children.

• Geomechanics and Engineering
• /
• v.17 no.2
• /
• pp.157-164
• /
• 2019

The effect of electrochemical modification of the physical and mechanical properties of sandstone from Paleozoic coal measure strata was investigated by means of liquid nitrogen physical adsorption, X-ray diffraction and uniaxial compressive strength (UCS) tests using purified water, 1 mol/L NaCl, 1 mol/L $CaCl_2$ and 1 mol/L $AlCl_3$ aqueous solution as electrolytes. Electrochemical corrosion of electrodes and wire leads occurred mainly in the anodic zone. After electrochemical modification, pore morphology showed little change in distribution, decrease in total pore specific surface area and volume, and increased average pore diameter. The total pore specific surface area in the anodic zone was greater than in the cathodic zone, but total pore volume was less. Mineralogical composition was unchanged by the modification. Changes in UCS were caused by a number of factors, including corrosion, weakening by aqueous solutions, and electrochemical cementation, and electrochemical cementation stronger than corrosion and weakening by aqueous solutions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.4
• /
• pp.954-967
• /
• 1996

Laser application to modify healthy permanent dentin to improve microhardness and caries resistence has been previously reported but the physical modification and ablation thresholds of carious and sclerotic dentin has yet to be identified. This study determined the energy density required by modify (physical modification threshold, PMT) and remove (ablation threshold, AT) infected carious, affected and selerotic dentin compared to healthy permanent dentin. $1{\pm}0.25mm$ thick dentin sections(n=272) from extracted human teeth were used. Smear layer was removed 0.5M EDTA for 2 minutes. Utilizing three pulsed fiberopitc delivered contact lasers with different emission wavelengths($1.06{\mu}m$=Nd : YAG, $2.10{\mu}m$=Ho : YAG and $2.94{\mu}mEr$ : YAG). The energy density($J/cm^2$) was incrementally increased and the resulting tissue interaction classified on a scale from 0-6. A minimum of 5 repetitions/energy density were completed. Light microscopy(10-25X) was used to verify the physical modification(scale=3) and ablation thresholds(scale=4) of the various forms of dentin and the data were analyzed by logistic regression at the 95 % confidence interval. PMT and AT by the laser and the dentin types were: PMT and AT was lower in infected dentin than in sound dentin for all lasers. PMT and AT induced by Nd : YAG>Ho : YAG>Er : YAG for all forms of dentin. Microhardness was increased in sound dentin at PMT. Morphology of crater examined by light microscopy showed Nd : YAG was safe and effective for removing carious dentin and Er: YAG was effective for removing sound dentin. The PMT and AT for YAG lasers are different as a function of dentin type which may be utilized for selective modification and removal of dentin.

• Corrosion Science and Technology
• /
• v.12 no.5
• /
• pp.233-238
• /
• 2013

In the case of casting materials or ductile materials for marine equipment, it is common to employ a surface modification for achieving cost reduction and improvement in strength. In particular, aluminium bronze ALBC3 exhibits excellent corrosion resistance, and thus widely used for marine application. However, application of the material under high-velocity seawater flow may induce electrochemical corrosion damage and physical damage such as cavitation erosion, leading to shorter service life of equipment. In this study, surface modification was carried out on ALBC3 alloy for different shot peening stand-off distances, and the physical hardness and electrochemical characteristics before and after modification were investigated. The results in each case showed the hardness increase in comparison with non-peened specimen, and the maximum hardness improvement(50 %) was found in 10 cm of shot-peening stand-off distance. It is observed that the electrochemical characteristics were irrelevant to application of shot peening.

• Geomechanics and Engineering
• /
• v.6 no.2
• /
• pp.139-151
• /
• 2014

Mudstone is a very common rock that, when in contact with water, can exhibit considerable volume change and breakdown. This behavior of mudstone is frequently encountered in geotechnical engineering and has a considerable influence on infrastructure stability. This is particularly important in the present work, which focuses on mitigating the harmful properties of mudstone. The samples studied are of Permian Age mudstone from Shandong Province, China. Modification tests using organic silicone additive material were carried out. The mechanisms of physical properties modification of mudstone were comparatively studied using corresponding test methods, and the modification mechanism of organic silicone additive material acting on mudstone was analyzed. The following conclusions were drawn. The surface texture and characters of mudstone changed dramatically, surface character turns from hydrophilic to hydrophobic after organic silicone additive material modification. The changes in the surface character indicate a reduction in the water sensitivity of mudstone. After modification, the shape of porosity and fracture of mudstone changed unremarkable, and the total and free expansion ratios decreased obviously, whereas the strength increased markedly.

• Journal of Korean Academy of Nursing
• /
• v.37 no.6
• /
• pp.902-913
• /
• 2007

Purpose: The purpose of this study was to identify the effects of a physical activity-behavior modification combined intervention(PABM-intervention) on metabolic risk factors in overweight and obese elementary school children. Methods: Thirty-two participants ($BMI\geq85$ percentile or relative $obesity\geq10$) were allocated to the PABM-intervention group and behavior modification only intervention group. The PABM -intervention was composed of exercise intervention consisting of 50 minutes of physical activity(Hip-hop dance & gym-based exercises) twice a week and the behavior modification intervention consisted of 50 minutes of instruction for modifying lifestyle habits(diet & exercise) once a week. Effectiveness of intervention was based on waist circumference, BP, HDL-cholesterol, TG, and fasting glucose before and after the intervention. Results: The proportion of subjects with 1, 2, 3 or more metabolic risk factors were 28.1, 43.8, and 15.6%, respectively. After the 8-week intervention, waist circumference, systolic BP, diastolic BP, and HDL-cholesterol changed significantly(p<.01) in the PABM group. Conclusion: This provides evidence that a PABM-intervention is effective in changing metabolic risk factors such as waist circumference, systolic BP, diastolic BP, and HDL-cholesterol in overweight and obese elementary school children.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2006.11a
• /
• pp.144-148
• /
• 2006

Kitchen space is one of the most dangerous places for the elderly. Modification of kitchen space for improving safety and independence for older residents is very important factor for aging -in-place. The purpose of this study wes to identify the current situation and modification of kitchen space by elderly-headed household. The sample included 108 respondents over the age 65 who consisted of elderly-couple or single person household with homeownership in Seoul. The data were analyzed by descriptive statistics. Based on the findings of the study, the present incidence and recognition of future need in kitchen modification were identified. Changes in kitchen space made tended to be nonstructural or relatively inexpensive items. In conclusion, this study suggests several ideas for improving current physical problems of kitchen space to support daily living of older residents.