• Tuberculosis and Respiratory Diseases
• /
• 제42권3호
• /
• pp.400-406
• /
• 1995

저자들은 개흉폐조직검사상 확진된 DAD가 병발된 다발성근염환자 1예를 경험하였기에 문헌고찰과 함께 보고하는 바이다.

• 한국임상수의학회지
• /
• 제31권4호
• /
• pp.316-318
• /
• 2014

3년령 한국 집고양이가 갑작스럽게 발병한 간헐적 경련 증상을 주 증상으로 내원하였다. 신체검사상 구리 빛 홍채가 관찰되었고, 양안에서 위협반사 소실이 관찰되었다. 혈액학 검사와 혈청 화학 검사에서 경증의 적혈구 증가증과 심한 소적혈구증, 증가된 ALT 활성도가 확인되었으며, 추가로 실시한 간기능 평가에서는 담즙산염 농도와 암모니아 농도가 증가하였다. 방사선 검사에서 간 내 다수의 결절이 관찰되었고, 간외성 션트 혈관을 발견하였으며, 추가로 실시한 컴퓨터 단층 촬영을 통해 복합 간외션트를 확인하였다. 고양이는 션트 혈관에 대한 외과적 처치술을 받기 위해 증상 완화를 위한 디아제팜과 락툴로즈를 투여하였으나 경련이 심화되었고, 심장 정지가 와서 폐사하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.414-420
• /
• 2005

The ShortStack Micro Server enables any product that contains a microcontroller or microprocessor to quickly and inexpensively become a networked, Internet-accessible device. The ShortStack Micro Server provides a simple way to add LonWorks networking to new or existing smart devices. . It implements the LonTalk protocol and provides the physical interface with the LonWorks communication. The ShortStack host processor can be an 8, 16, or 32-bit microprocessor or microcontrollers. The ShortStack API and driver typically require about 4kbytes of program memory on the host processor and less than 200 bytes of RAM. The interface between host processor and the ShortStack Micro Server may be a Serial Communication Interface (SCI). The LonWorks control module with a high performance is developed, which is composed of the 8 bit PIC Microprocessor for host processor and the smart neuron chip for the ShortStack Micro Server. This intelligent control board is verified as proceeding the various function tests from experimental system with an boost pump and inverter driving systems. It is also confirmed that the developed control module provides stably 0-10VDC linear signal to the input signal of inverter driving system for varying the induction motor speed. Thus, the experimental results show that the fabricating intelligent board carried out very well the various functions in the wide operating ranges of boost pump system. This developed control module expect to apply to industrial fields to require the comparatively exact control and monitoring such as multi-motor driving system with inverter, variable air volume system and the boost pump water supply systems.

• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.388-395
• /
• 2013

PURPOSE. The purpose of this study was to estimate the effects of occlusal stability to identify action mechanisms of mouthguards, known to have a modulatory effect on limb muscle function. MATERIALS AND METHODS. This study included 20 male subjects to perform the isokinetic muscle tests and the Wingate anaerobic power test on both knee joints under five closed-mouth conditions: without or with 4 types of mouthguards with thickness of 2 mm based on premolar area: (1) full-coverage, (2) anterior partial-coverage, (3) right posterior partial-coverage, and (4) left posterior partial-coverage. The obtained results were subjected to One-way ANOVA with repeated measures, followed by post hoc test of the contrast method (${\alpha}$=.05). RESULTS. There was no significant difference between the closed position with and without a full-coverage mouthguard in all variables. However, significant differences were observed between with and without a partial-coverage mouthguard in muscular endurance during extension of the left knee, muscular power and endurance during flexion of the right knee. Additionally, significant differences were found between occlusal states with full- and partial-coverage mouthguards in muscular power and endurance during extension of the left knee. CONCLUSION. These findings indicate the elevation of vertical dimension by 2 mm or the inducement of occlusal stability had little effect on isokinetic muscle strength and anaerobic performance, while uneven distribution of occlusal force might have some positive effects.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.647-652
• /
• 2008

This paper focused on the application of finite element model updating technique to evaluate the structural properties of the reinforced concrete specimen using the data collected from shaking table tests. The specimen was subjected to six El Centro(NS, 1942) ground motion histories with different Peak Ground Acceleration(PGA) ranging from 0.06g to 0.50g. For model updating, flexural stiffness values of structural members(walls and slabs) were chosen as the updating parameters so that the converged results have direct physical interpretations. Initial values for finite element model were determined from the member dimensions and material properties. Frequency response functions(i.e. transfer functions), natural frequencies and mode shapes were obtained using the acceleration measurement at each floor and given ground acceleration history. The weighting factors were used to account for the relative confidence in different types of inputs for updating(i.e. transfer function and natural frequencies). The constraints based on upper/lower bound of parameters and sensitivity-based constraints were implemented to the updating procedure in this study using standard bounded variable least-squares(BVLS) method. The veracity of the updated finite element model was investigated by comparing the predicted and measured responses. The results indicated that the updated model replicates the dynamic behavior of the specimens reasonably well. At each stage of shaking, severity of damage that results from cracking of the reinforced concrete member was quantified from the updated parameters(i.e. flexural stiffness values).

• 한국소음진동공학회논문집
• /
• 제18권7호
• /
• pp.725-731
• /
• 2008

This paper focused on the application of finite element model updating technique to evaluate the structural properties of the reinforced concrete specimen using the data collected from shaking table tests. The specimen was subjected to six El Centre (NS, 1942) ground motion histories with different peak ground acceleration (PGA) ranging from 0.06 g to 0.50 g. For model updating, flexural stiffness values of structural members (walls and slabs) were chosen as the updating parameters so that the converged results have direct physical interpretations. Initial values for finite element model were determined from the member dimensions and material properties. Frequency response functions (i.e. transfer functions), natural frequencies and mode shapes were obtained using the acceleration measurement at each floor and given ground acceleration history. The weighting factors were used to account for the relative confidence in different types of Inputs for updating (j.e. transfer function and natural frequencies) The constraints based on upper/lower bound of parameters and sensitivity-based constraints were implemented to the updating procedure in this study using standard bounded variable least-squares(BVLS) method. The veracity of the updated finite element model was investigated by comparing the predicted and measured responses. The results indicated that the updated model replicates the dynamic behavior of the specimens reasonably well. At each stage of shaking, severity of damage that results from cracking of the reinforced concrete member was quantified from the updated parameters (i.e. flexural stiffness values).

• Clinical and Experimental Pediatrics
• /
• 제60권11호
• /
• pp.337-343
• /
• 2017

Attention deficit hyperactivity disorder (ADHD) is one of the most common psychiatric disorders in childhood. This disorder, in addition to its main symptoms, creates significant difficulties in education, social performance, and personal relationships. Given the importance of rehabilitation for these patients to combat the above issues, the use of virtual reality (VR) technology is helpful. The aim of this study was to highlight the opportunities for VR in the rehabilitation of children with ADHD. This narrative review was conducted by searching for articles in scientific databases and e-Journals, using keywords including VR, children, and ADHD. Various studies have shown that VR capabilities in the rehabilitation of children with ADHD include providing flexibility in accordance with the patients' requirements; removing distractions and creating an effective and safe environment away from real-life dangers; saving time and money; increasing patients' incentives based on their interests; providing suitable tools to perform different behavioral tests and increase ecological validity; facilitating better understanding of individuals' cognitive deficits and improving them; helping therapists with accurate diagnosis, assessment, and rehabilitation; and improving working memory, executive function, and cognitive processes such as attention in these children. Rehabilitation of children with ADHD is based on behavior and physical patterns and is thus suitable for VR interventions. This technology, by simulating and providing a virtual environment for diagnosis, training, monitoring, assessment and treatment, is effective in providing optimal rehabilitation of children with ADHD.

• 폴리머
• /
• 제35권1호
• /
• pp.13-16
• /
• 2011

본 연구에서는 생체 적합성이 우수한 합성고분자 폴리비닐피롤리돈(PVP)과 천연고분자 카피-카라기난(${\kappa}C$), 1,2-헥산디올(HD)을 혼합하여 감마선 조사에 의한 방사선 가교로 하이드로젤을 제조하였다. 방사선 조사량은 25 kGy, ${\kappa}C$의 농도는 3 wt%로 고정하였다. 이렇게 제조된 하이드로젤의 의 PVP, HD의 농도에 따른 물리적 특성을 관찰하였다. PVP의 농도가 증가할수록 피롤리돈 분자 사이의 가교반응으로 젤화율과 연장강도는 증가하였고, 팽윤도는 감소하였다. 반면에 HD의 농도가 증가할수록 젤화율과 인장강도는 감소하였으며, 팽윤도는 증가하였다. 항균성 실험을 통해 HD를 함유한 하이드로젤에서 항곰팡이성 활성이 관찰되었다.

• 조명전기설비학회논문지
• /
• 제16권3호
• /
• pp.47-54
• /
• 2002

본 논문은 단상 50[kVA] 몰드변압기 권선부의 열전달 특성에 대한 연구 결과이다. 1차 권선의 열전도도는 권선을 이루고 있는 물질 비 즉, 1차 권선의 절연을 담당하는 다량의 에폭시 수지와 그에 비해 소량의 구리 도선을 고려하여 결정하였다. 반면에 2차 권선의 경우 구성 성분은 다량의 구리도선과 절연을 담당하는 소량의 에폭시 수지로 되어 있다. 2차 권선 열전도도는 질량 비로서 결정될 수 없기 때문에 2차 권선의 열전도도값은 시작품의 측정 최고온도와 FEM을 이용한 분석결과를 비교하여 결정하였다. 각 권선부의 물리적 특징을 고려하여 상용 프로그램을 통해 시뮬레이션 모델을 만들었다. 본 연구결과를 바탕으로 몰드변압기 권선부에 Hole이 존재할 때와 안할 때 각각에 대해 주위온도·풍속변화에 따른 최고온도 변화를 고찰하였다.

• Pediatric Infection and Vaccine
• /
• 제4권2호
• /
• pp.308-313
• /
• 1997

Ceftriaxone, an effective third generation cephalosporin with a wide range of antimicrobial activity, has become widely used by pediatricians for a variety of bacterial infections including meningitis. It has been associated with the development of sludge or stone in the gallbladder of some patients treated with this drug. Ceftriaxone associated biliary sludge has unusual acoustic characteristics and resembles gallstone. The sludge can cause symptoms such as cramping abdominal pain, and disappears after stopping ceftriaxone administration. Because of these seemingly confusing observations, it is important for the clinicians to recognize these findings that ceftriaxone treatment can cause. We report a case of ceftriaxone associated biliary sludge in Korean children. A 6-year-old girl who was treated for meningitis with ceftriaxone (100mg/kg/day) developed cramping upper abdominal pain from 5th hospital day. Physical examination, liver function tests and X-ray revealed no specific abnormal findings. But abdominal ultrasound revealed high amplitude echogenic sludge with prominent post-acoustic shadow in gallbladder and its diameter was 1.5cm. We stopped ceftriaxone administration and tried conservative care. Abdominal cramping pain subsided after 3 days of ceftriaxone removal. Second abdominal ultrasound confirmed the disappearance of sludge at 3 weeks later.