• Elastomers and Composites
• /
• v.4 no.1
• /
• pp.83-88
• /
• 1969

As a part of a series of previous studies, physical properties of various portions of a tire made of NR-Syn. R bloods were studied. 1. It was found, in general, most effective for tire tread when 50 parts of HAF black was blended with NR and Syn. R with a ratio of 70/30. 2. It was found that the use of SBR 1712 has an advantage in price, easy processing and physical properties than other synthetic rubber. 3. A technical compounding of various portions of a tire has to be determined for optimum cure conditions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.173-174
• /
• 2015

This research takes granite stone based floor finishing exposed to concentrated downpouring and observes the material's physical changes, adhesiveness, compressive strength under wet conditions. The results of the experiments shows that elution of sulfide mineral can occur when granite stones are exposed to downpour, but short term exposure shows little physical changes to the material. This indicates that if post maintenance is properly enacted, long term usage of granite stone materials is also possible.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.3
• /
• pp.98-108
• /
• 2005

The assembly line balancing problem has been focused by many research works because the efficient management of the assembly line might influence not only the quality of the products but also the working conditions for the workers. This paper deals with U-shape mixed-model assembly line balancing and considers both the processing time and the physical workloads. We suggest the goal programming approach for this situation and to overcome some difficulties of finding optimal solution, we adopt the genetic algorithm that is one of the most promising solution techniques. We tested several test problems and present the results that indicate some improvement for the line balancing as well as the stable performance of the algorithm.

• Journal of Korean Physical Therapy Science
• /
• v.4 no.1
• /
• pp.351-359
• /
• 1997

The joint dysfunction is the major cause of pain in trunk and extremities according to J. McM. Mennell who mentioned that there were no pathological changes that was found in the painful joint. The referred pain due to joint dysfunction has to be differentiated from other painful conditions, particularly of the neuromusculoskeletal system. Most of the pain in the lower extremities is due to the sacroiliac joint dysfunction according to Setsuo Hakata who had developed arthrokinematic approach(AKA) for sacroiliac joint in 1989. AKA for sacroiliac dysfunction is made up of distraction & gliding technics that are no violent to recover the disturbed intra-articular movement and result in immediate relief of pain.

• Korean Institute of Interior Design Journal
• /
• no.9
• /
• pp.18-23
• /
• 1996

Among the building types in which behavioral issues play, the largest role are institutional environments. Such setting share a number of important characteristics ; they serve specific population (e.g. the ill, the elderly , '||'&'||' inmates) : they are directed toward specific social behavioral objectives(e.g medical care, education , '||'&'||' rehabilitation); and they are "Total institution" in which residents spend all of there time. The basic concepts and theories of environment-behavior studies are of direct relevance in understanding such social institutions. In this study, I have examined the relationships between waiting and the specific conditions of the hospital experience. More specifically, this is a study of visitors (outpatient) within the context of the hospital , and the physical setting designated for their use in the outpatient waiting room. Environment behavior studies, with its commitment to individual behavior and the physical environment might well be a particularly way by which a study of waiting rooms can demonstrate the power of this approach and its integrative among disciplines.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.3
• /
• pp.303-308
• /
• 2012

Purpose : The purpose of this study is to define the change of lumbar asymmetry multifidus muscles when upper extremity PNF pattern. Methods : For this research, twenty-nine asymptomatic participants were voluntary attended. Under the identical conditions, Multifidus muscles were measured standing position and on L4,L5 vertebral level by MyLabOne (ESAOTE, Netherland with a 3.5MHz covex array transducer). The upper extrimity PNF pattern used to activate the multifidus ipsilateral and cotralateral. Results : Results of analysis showed that at the L4, L5 vertebral level, healthy asymtomativ subjects had asymmetry multifidus muscles size. The depth of the multifidus muscles were significantly increased at contralateral upper extrimity PNF pattern, but no significant differences were comparison ipsilateral with contralateral. Conclusion : The multifidus muscle in asymptomatic subjects clinical significance asymmetry. Contralateral upper extrimity PNF pattern seems to be the most suitable exercise for strenthen the smaller size of the multifidus. This study will be used as a prevention method of LBP.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1289-1294
• /
• 2018

The present study aims to investigate experimentally and theoretically thermal ablation in soft tissues by using high intensity focused ultrasound (HIFU) to assess tissue damage during HIFU thermotherapy. The HIFU field was calculated by solving the axisymmetric Khokhlov-Zabolotskaya-Kuznetsov equation from the frequency-domain perspective. The temperature field was calculated by solving Pennes' bioheat transfer equation, and the thermal dose required to create a thermal lesion was calculated by using the thermal dose formula based on the thermal dose of a 240-min exposure at $43^{\circ}C$. In order to validate the simulation results, we performed thermal ablation experiments in a tissue-mimicking phantom and ex-vivo porcine liver for two different HIFU source conditions by using a 1.1-MHz, single-element, spherically focused HIFU transducer. The small difference between the measured and the predicted lesion sizes suggests that the implementation of the numerical model used here should be modified to iteratively allow for temperature-dependent changes in the physical properties of tissues.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.339-341
• /
• 2013

The magnetic field standards, facilities and capabilities available at NPL for the calibration of magnetometers and gradiometers and the measurement of the magnetic properties of materials will be introduced. The details of the low magnetic field facility will be explained and the capabilities this facility enables for the characterisation and calibration of ultra-sensitive room temperature magnetic sensors will be presented. Building on core material capabilities that are compliant with the IEC 60404 series of written standards, the example of a standard permeameter that has been modified for the measurement of strips for real world conditions is discussed. This was incorporated into a stress machine to measure the DC properties of the soft magnetic materials used by the partners of a collaborative industry led R&D project at stress levels of up to 700 MPa. The results for three materials are presented and the changes in the properties with applied stress compared to establish which material exhibits favourable properties.

• Journal of Korean Foot and Ankle Society
• /
• v.25 no.1
• /
• pp.1-5
• /
• 2021

Physical examination and surgical findings and symptoms are often inconsistent with magnetic resonance imaging (MRI) findings when diagnosing chronic ankle lateral ligament instability, and confirmed surgical findings are used as the gold standard in most clinical studies. Anterior drawer testing is considered unreliable because normal findings are highly variable, and its accuracy ranges from 50% to 100%. Furthermore, radiographic stress imaging, such as in anterior drawer stress view, is performed under manual stress or using a stress device, and its findings also vary widely and confuse when interpreting stress views. The average accuracy of MRI findings is around 85% (range, 66%~91.7%), and thus, cannot be used as a primary indicator for surgery. For patients with suspected lateral ankle ligament instability, based on symptoms and physical examination findings, MRI may be useful for identifying lesions in ankle joints and for differentiating them from other conditions.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.4
• /
• pp.237-244
• /
• 2018

Objective: Flat-footed people struggle with excessive ankle joint motion during walking and running. This study aimed to investigate the effects of customized three-dimensional 3D-printed insoles on the kinematics of flat-footed people during daily activities (walking and running). Method: Fifteen subjects (height, $169.20{\pm}2.61cm$; age, $22.87{\pm}8.48years$; navicular bone height, $13.2{\pm}1.00mm$) diagnosed with flat feet in a physical examination participated in this study. Results: The customized 3D-printed insoles did not significantly affect 3D ankle joint angles under walking and running conditions. However, they shifted the trajectory of the center of pressure (COP) laterally during fast walking, which enhanced the load distribution on the foot during the stance phase. Conclusion: The customized 3D-printed insoles somewhat positively affected the pressure distribution of flat-footed people by changing the COP trajectory. Further research including comparisons with customized commercial insoles is needed.