• Korean Journal of Environmental Agriculture
• /
• v.31 no.3
• /
• pp.212-216
• /
• 2012

BACKGROUND: Green manure and graminaceousmanure crops have several benefits, such as improving soil physical and chemical properties and utilizing excessive greenhouse nutrients that they have a potential to be a water pollutant source. METHODS AND RESULTS: The objective of this study was to investigate nitrogen (N) supplying capabilities of green manure and graminaceous manure crops for lettuce (Lactuca sativa L.) and Chinese cabbage (Brassica campestris L.) grown under greenhouse conditions. For this two leguminous manures (Crotalaria juncea (Cr.) and Sesbaniaexaltata (Se.)) and two graminaceous manures (Sorghum bicolor; Haussolgo(Ha.) and Sudangrass (Sg.)) in the greenhouse were grown, cut, and incorporated into the greenhouse soil before planting. Chemical nitrogen (N) fertilizer rate was estimated based on N recommendation for lettuce and Chinese cabbage. 100% of the N recommended rates (1N) were 70 kg N $ha^{-1}$ for lettuce and 60 kg N $ha^{-1}$ for Chinese cabbage and 50% of the N recommendation rates (0.5N) were 35 kg N $ha^{-1}$ for lettuce and 30 kg N $ha^{-1}$ for Chinese cabbage. Nitrogen treatments were control (0N), Cr., Se., Cr + 0.5 N, Se + 0.5 N, Ha + 0.5 N, Sg + 0.5 N, and N recommendation rate (1N). Incorporated N from green manure and graminaceous manure crops were 130, 116, 93, and 87 kg N $ha^{-1}$ for Cr., Se., Ha., and Sg., respectively. Lettuce and Chinese cabbage were grown after incorporated green manure crops into the greenhouse soil. There was no significant difference in lettuce and Chinese cabbage yields under N treatments except control (0 kg/ha). Nitrogen use efficiency (NUE)was from 44% to 73% and the highest NUE was under Se. treatment. Although yields were not statistically different under N treatments except control, actual yield increase ranged from 170 to 1,100 kg/ha for lettuce and ranged from 2,770 to 5,210 kg/ha for Chinese cabbage compared to yield under N recommendation rate. Estimated economic benefit from this would be higher approximately between \2,770,000 and \5,210,000/ha under N treatments except control than the N recommendation rate. CONCLUSION: These results suggest that incorporating green manure crops, such as Cr. and SeSe. into soil or adding 0.5 N after incorporation of them can be beneficial in many ways in that it increases economic return because of yield increase, reduces the use of chemical N, and decreases the negative environmental impact on water quality because excessive N in the greenhouse soil can be used by green manure crops during the fallow.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.187-196
• /
• 2010

Recently, people have been suffering from stress-related fatigue and psychological disorders. Most people depend on medicine for pain relief; many treat pain also through alternative medicine or replacement therapy. However, drug therapy has many side effects, including increased stress after the therapy. In comparison, alternative therapies such as massage and foot reflexology are less damaging to the body, and such therapies can be provided without physical or psychological discomfort. In this regard, the author had previously co-developed color foot reflexology, which combines the merits of color therapy and foot reflexology; color foot reflexology has been shown to have beneficial effects without undue pain. This study investigates the effects of color foot reflexology on the physiological response of the body by comparing the body’s response to the signal with that to the placebo. Healthy adult subjects were selected for the experiment, which was conducted under optimal experimental conditions and design. The results indicated that when stimulated, parasympathetic nerves increased in HRV and that blood pressure, pulse, body heat, peripheral blood flow were dramatically activated. However, the results for the placebo indicated minimal changes or irregular outcomes. The results provide strong evidence for the beneficial effects of the color foot reflexology instrument on the autonomic nervous system and on the physiological response of the body. Future research is warranted to verify the results of the current study by examining patients suffering from diseases and disorders arising from irregular physiological functions in the context of the foot.

• Tunnel and Underground Space
• /
• v.16 no.2 s.61
• /
• pp.109-134
• /
• 2006

Rocks undergo weathering processes influenced by changing in pressure-temperature condition, atmosphere, underground water, and rainfall. The weathering processes change physical and chemical characteristics of the rocks. Once the rocks are weathered, the characteristics of them are changed and, because of the changing, several disadvantages such as rock slope failures and underground water spouts are can occur. Before we cut a large rock slope, therefore, we must analyze current weathering conditions of rocks and predict weathering processes in the future. Through the results of such analyses, we can judge reinforcement works. In order to comply with such requests, chemical weathering sensitivity analysis which was analyzed from chemical weathering velocities and other characteristics of rocks has been applied in several prior construction works in Korea. But, It is defective to use directly in engineering fields because it was developed for soils(not rocks), it has too mny factors must be considered and the relationships between the factors are not clear, and it is hard to explain the weathering processes in engineering time range. Besides above, because it has been used for isotropic rocks, this method is hard to apply to anisotropic rocks such as sedimentary rocks. Acceding to studies from morphologists (e.g. Oguchi et al., 1994; Sunamura, 1996; Norwick and Dexter, 2002), time dependent strength reduction influenced by weathering shows a negative exponential function form. Appling this relation, one can synthesize the factors which influence the weathering processes to the strength reduction, and get meaningful estimates in engineering viewpoint. We suggest this weathering sensitivity characterization method as a technique that can explain time dependent weathering sensitivity characteristics through strength changes and can directly applied the rock slope design.

• 한국해양학회지
• /
• v.30 no.3
• /
• pp.184-196
• /
• 1995

The line-SW is located in the mouth of Gomso Bay (20 Km long and 5-8 Km wide),west coast of Korea. This area is composed of sand flat, mud flat, sand shoal and chenier, The difference of physical, geological and geomorphic conditions in subenvironments of the bay may control and produce distingtive foraminiferal populations and assemblages. This study investigates whether five a priori subenvironments (five local zonations) in Gomso-Bay tidal flat can be distinguished from each other on the basis of total (living plus dead) foraminiferal assemblages. Seventy-four species (67 benthic; 7 planktonic) were recorded in total assemblages of surface sediments from 10 stations. Ammonia beccarii tepida, Discorbis candeiana, Elphidium etigoense and Eponides nipponicus were most dominant species in living and total assemblages. The relative abundance (%) of living population was high at upper flat and decreased from upper to lower flat. The low percentages of living populations in middle to lower flat are probably influenced by the decreasing reproduction of foraminifera caused by high energy condition and addition of dead species from offshore. The occurence of planktonic foraminifera in middle to lower flat (5.3∼6.6%) indicates introduction of planktonic foraminifera from offshore by storm and/or tidal current. The relatively high numbers of species in lower middle to lower flat are probably caused by a mixing of faunas from these areas and offshore. The high numbers of total individuals per 50 ml of sediment in upper flat indicate that this area is a relatively stable environment where waves and currents are protected by the chenier. Five biofacies of the total foraminiferal assemblages were established on the basis of dominant species (those representing more than 20% of the total assemblages in any station) in the five a priori subenvironments recognized along the Line-SW transect in Gomso-Bay tidal flat. Five biofacies are potentially useful in paleoenvironmental interpretation in late Quaternary Gomso-Bay tidal deposits.

• Radiation Oncology Journal
• /
• v.20 no.2
• /
• pp.186-192
• /
• 2002

Purpose : Measurement of transmission dose is useful for in vivo dosimetry. In this study, previous algorithm for estimation of transmission dose was modified for use in cases with tissue deficit. Materials and Methods : The beam data was measured with flat solid phantom in various conditions of tissue deficit. New algorithm for correction of transmission dose for tissue deficit was developed by physical reasoning. The algorithm was tested in experimental settings with irregular contours mimicking breast cancer patients using multiple sheets of solid phantoms. Results : The correction algorithm for tissue deficit could accurately reflect the effect of tissue deficit with errors within ${\pm}1.0\%$ in most situations and within ${\pm}3.0\%$ in experimental settings with irregular contours mimicking breast cancer treatment set-up. Conclusion : Developed algorithm could accurately reflect the effect of tissue deficit and irregularly shaped body contour on transmission dosimetry.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.3-11
• /
• 1989

This study was carried out to investigate the physical and mechanical properties. durability of adhesive bond and paint film for the basic data which were required to determine the suitability as a raw material for furniture the laminated veneer lumber (LVL) with pitch pine (Pinus rigida Mill). The results obtained were as follows; 1) The proper pressing time for making the LVL was over 45 second per milimeter of LVL thickness. 2) The bending strength of the LVL was lower than that of the solid wood but the compressive strength of the LVL was similar to that of the solid wood. The strength increased with the decrease of veneer thickness. 3) The impact bending absorbed energy of the LVL was 0 to 0.3 kg.m/$cm^2$ in the direction of parallel to the grain. The energy of the LVL was lower than that of the solid wood (0.68 kg.m/$cm^2$). 4) In warm water soaking and cold-dry tests, delamination of adhered layers surface crack, swelling, and color change were not found when the hot pressing time was over 45 second per milimeter of LVL thickness. As a result of soak under vacuum test shrinkage in the direction of parallel to the grain was about -1.0 percent and. was about 3.0 percent in the direction of the perpendicular to the grain. 6) The film cacks on the LVL's surface after the wet and cold-dry test were not found at all. 7) In the use of the LVL for interior decoration it was considered that the surface of the LVL be overlaid crossly with fancy veneers of birch and paulownia, etc. This cross overlayirg methods have resulted in few cracks on the fancy veneer.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.185-189
• /
• 2007

Animals must be inspected prior to and after slaughter to make certain they are free of diseases and unacceptable defects. Since meats are potentially hazardous foods, they should not be accept if there are any signs of contamination, temperature abuse, or spoilage. This survey was aimed to monitor the current situation of country-of-origin labels and sanitation for the meat markets in Seoul, Korea. The markets were divided into groups as to 25 territories in Seoul and the size of markets (large size, medium size, and small size). In terms of size distribution, small butcher shops occupied the highest percentage. On the itemized suitability test of unpacked and packed beer in Seoul, most butcher shops showed good evaluation. However, labels indicating the grade, storage and cooking instruction for unpacked beef were not properly posted on the products. The results of monitoring sanitation conditions for butcher shops in Seoul showed relatively low suitability. Especially, there were serious lack of knowledge about wearing the sanitation clothings, caps, and shoes. The problem with food safety is so complicated that producers, consumers, merchandisers, the press, the government and the scholar should try to solve the problems altogether. Also, it is important to educate and provide them with correct understanding and information for food hygiene and safety.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.1
• /
• pp.85-97
• /
• 2007

Statement of problem: Recently, anodic oxidation of cp-titanium is a popular method for treatment of titanium implant surfaces. It is a relatively easy process, and the thickness, structure, composition, and the microstructure of the oxide layer can be variably modified. Moreover the biological properties of the oxide layer can be controlled. Purpose: In this study, the roughness, microstructure, crystal structure of the variously treated groups (current, voltage, frequency, electrolyte, thermal treatment) were evaluated. And the specimens were soaked in simulated body fluid (SBF) to evaluate the effects of the surface characteristics and the oxide layers on the bioactivity of the specimens which were directly related to bone formation and integration. Materials and methods: Surface treatments consisted of either anodization or anodization followed thermal treatment. Specimens were divided into seven groups, depending on their anodizing treatment conditions: constant current mode (350V for group 2), constant voltage mode (155V for group 3), 60 Hz pulse series (230V for group 4, 300V for group 5), and 1000 Hz pulse series (400V for group 6, 460V for group 7). Non-treated native surfaces were used as controls (group 1). In addition, for the purpose of evaluating the effects of thermal treatment, each group was heat treated by elevating the temperature by $5^{\circ}C$ per minute until $600^{\circ}C$ for 1 hour, and then bench cured. Using scanning electron microscope (SEM), porous oxide layers were observed on treated surfaces. The crystal structures and phases of titania were identified by thin-film x-ray diffractmeter (TF-XRD). Atomic force microscope (AFM) was used for roughness measurement (Sa, Sq). To evaluate bioactivity of modified titanium surfaces, each group was soaked in SBF for 168 hours (1 week), and then changed surface characteristics were analyzed by SEM and TF-XRD. Results: On basis of our findings, we concluded the following results. 1. Most groups showed morphologically porous structures. Except group 2, all groups showed fine to coarse convex structures, and the groups with superior quantity of oxide products showed superior morphology. 2. As a result of combined anodization and thermal treatment, there were no effects on composition of crystalline structure. But, heat treatment influenced the quantity of formation of the oxide products (rutile / anatase). 3. Roughness decreased in the order of groups 7,5,2,3,6,4,1 and there was statistical difference between group 7 and the others (p<0.05), but group 7 did not show any bioactivity within a week. 4. In groups that implanted ions (Ca/P) on the oxide layer through current and voltage control, showed superior morphology, and oxide products, but did not express any bioactivity within a week. 5. In group 3, the oxide layer was uniformly organized with rutile, with almost no titanium peak. And there were abnormally more [101] orientations of rutile crystalline structure, and bonelike apatite formation could be seen around these crystalline structures. Conclusion: As a result of control of various factors in anodization (current, voltage, frequency, electrolytes, thermal treatment), the surface morphology, micro-porosity, the 2nd phase formation, crystalline structure, thickness of the oxide layer could be modified. And even more, the bioactivity of the specimens in vitro could be induced. Thus anodic oxidation can be considered as an excellent surface treatment method that will able to not only control the physical properties but enhance the biological characteristics of the oxide layer. Furthermore, it is recommended in near future animal research to prove these results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.455-469
• /
• 2008

Statement of problems: In the area of dental care, the institutionalized elderly have placed the most vulnerable state, and we cannot find their subjective need of dental treatment because of the physical and mental disabilities, But we have no basic investigation of their oral health conditions. Purpose: The aims of the current study were to investigate the oral health status of institutionalized elderly patients who are in the least benefited side of dental service, and to analyze their dental treatment needs. Material and methods: The survey of the oral status was carried out on 758 institutionalized elderly, and 212 elderly who was more than 65 years old from D dental office, and it was based on the Guidelines of Oral Health Research of year 2000 in Republic of Korea. Results and conclusion: The DMFT index of the institutionalized elderly appeared higher than that of the same ages in control group, and it increased with age. The number of residual teeth of the institutionalized elderly appeared lower than that of the same ages in control group, and it decreased with age (P < .05). The number of fixed partial denture in institutionalized elderly was lower than that of the same ages in control group (P < .05). The percentage wearing removable partial denture was not significant between the elderly in institutions and the control group, and was not different according to age between the two groups. The percentage of institutionalized elderly wearing complete denture appeared lower than that of the same ages in control group, and it increased with age. The percentage of institutionalized elderly needing complete denture was higher than that of control group, and the percentage of elderly needing complete denture on the maxilla was higher than that of the mandible. 16.35% of the institutionalized elderly was living without denture in spite of their fully edentulous state. The need for complete denture increased rapidly with age. The number of valued teeth and dental prostheses in shortened dental arch concept and number of occluding pairs of teeth of institutionalized elderly were lower than that of the control group (P < .05). In institutionalized elderly, the number of residual teeth, the number of fixed partial dentures, and the percentage wearing removable partial dentures were higher in the mandible, and the percentage wearing complete dentures was higher in the maxilla (P < .05). The rate of institutionalized elderly needing prosthodontic treatment appeared to be 67.82%, where the number of occluding pairs of teeth was less than 10. When it is difficult to evaluate the subjective need of dental treatment as with the institutionalized elderly, estimation using the number of occluding pairs of teeth can be a useful indicator that can project treatment needs. For the oral health care of institutionalized elderly, it is essential to increase the awareness of nurses and caregivers who take care of them, about the importance of the oral health. Since the average life span and number of residual teeth are increasing gradually, the welfare policy should be changed to implementing regular dental examinations, preservative treatment forms and oral health control of dentulous patients where the traveling-treatment system and visit system are supplemented. And principles should be set that the present denture project of edentulous patients should be done by specialists who'll also be responsible for postmanagement. Through this research of institutionalized elderly, the oral health status which is worsened by aging could be confirmed. And the interest and positive participation of dental society on the elderly should come first in order to solve the rising treatment needs of the elderly patients.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.131-144
• /
• 1998

Understanding of the reasons why users in recreation settings select particular trails may provide useful information for effective recreation resources management. This study investigated the present use of the major trails in Mudeung-san Provincial Park and the major influential factors on trail selection. This study was conducted in Mudeung-san Provincial Park stretching over Hwasun-gun and Damyang-gun of Chonnam Province and Kwang-ju city during August in 1996. Data were collected through on-site survey and mail-back questionnaire. 519(44.2%) out of 1173 survey samples were used for analysis. Reasons for selecting a particular trail were classified into 8 major factors. In overall, the order of the importance degree of the factors was 1) aesthetics of landscape, 2) safety(from physical and crime), 3) conditions for health, 4) quietness, 5) familiarity, 6) on the way to the destination, 7) convenience/social, 8) others' intention. There were differences in the degree of importance of each factor depending on trails, users' characteristics(eg., gender, age, group size, visit experience, etc.) and users' behavioral patterns. Recreation motivations were classified into 5 major factors. The order of the importance degree of the factors was 1) contacting with nature, 2) self-training, 3) solitude, 4) social interaction, 5) appreciating cultural properties. Regardless of trails, 'contacting with nature' was the most important factor, and the degree of importance in the other 4 motivational factors showed only a little differences in order according to the trails. There were correlations between major factors for trail selection and recreation motivations. The results of this study may provide foundational information for establishing effective management strategies through better understanding of the present use of trails and influential factors on trail selection. It can be used for reducing the present social and ecological problems caused by use concentration on certain trails and providing users with better quality of diverse recreational experiences. This study discussed the findings, and suggested some management strategies based on these information.