• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4185-4190
• /
• 2013

We executed the property changes of the sintered MgO (99.9% purity, 300nm size) specimens with addition to CaO content of 0.00wt%, 0.25wt%, and 0.50wt%, processed at 7GPa, for 5min, 600~$800^{\circ}C$. To investigate the micro-structure and physical property changes of the sintered MgO(-CaO), we employed a scanning electron microscopy(SEM), X-ray diffractomerty(XRD), Vickers hardness, and density. The SEM result showed that MgO powder of 300nm size was changed into sintered structure of 520nm by high pressure and low temperature sintering, regardless of the CaO contents. According to the XRD analysis, no CaO phase observed, while MgO peaks shift indicated the existence of CaO in the MgO matrix. The Vickers hardness result showed that hardness of sintered MgO-CaO increased by 12% compared pure MgO under the same temperature conditions. It implied that we can obtain the same hardness with $100^{\circ}C$ lowered sintering temperatures by addition of CaO. The density results showed that it was possible to obtain density of 98%, which is 5% greater than that of pure MgO at low temperature of $600^{\circ}C$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.128-135
• /
• 2010

Polymer-modified cement mortar(PCM) has been widely used for strengthening of the concrete structures due to its excellent physical properties such as high strength and durability. Adhesive strength or behavior, on the other hands, between PCM and concrete is very important in strengthening the concrete member using PCM. Therefore the adhesive failure mechanism between PCM and concrete should be fully verified and understood. This study was performed to evaluate adhesive strength of PCM to the concrete by the direct pull-out test. In the direct pull-out tests, the adhesive strength under the various pre-treatment conditions such as immersion, thunder shower, freezing and thawing are evaluated. Also, the field direct pull-out test are performed to investigate the adhesive strength of mock-up test specimens. In the results of the test, the adhesive strength value by field test are lower than those of the standard curing condition. From these comparison and investigation, field test result was similar with the thunder shower test result. The results of the test was used to evaluate the korean industrial standard of polymer modified cement mortars for maintenance in concrete.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.64-72
• /
• 2013

The purpose of this study is to confirm the possibility of obtaining high grade coal from 57.39% of fixed carbon fine coal. Also, the mineralogical, physical/chemical and liberation characteristics are to be identified to decrease in ash amount, during the pre-processing of clean coal technology. In this study, batch flotation and CPT column flotation proper for the processing of fine particles were used with the variation in kinds and quantity of frother, collector and depressant. Also air flow rate and feeding rates were examined. As a result of batch flotation using 20% of pulp density DMU 101 collector(100 mL/ton), AF65 frother(300 mL/ton), sodium metaphosphate depressant (1 kg/ton), 67.57% of ash rejection and 70.90% of combustible recovery were obtained. The result of CPT column flotation was 85.59% of ash rejection and 88.97% of combustible recovery under the conditions of 5% of pulp density, DMU-101 collector (100 mL/ton), AF65 frother(10 L/ton), SMP depressant(1 kg/ton), wash water(100 mL/min.) and air flow rate(1,200 mL/min.).

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.111-122
• /
• 2013

This study was carried out to reduce patient dose through focus-detector distance, kilovoltage, and a combination of copper filters. In the C, L-spine lateral, Skull AP views were obtained by making changes of 60-100 kV in tube voltage and of 100-200 cm in focus-detector distance and by adding a copper filter when using an auto exposure control device in the digital radiography equipment. The incident dose showed 90 kV, 0.3 mmCu in C-spine lateral with 0.06 mGy under the condition of 200 cm; 100 kV, 0.3 mmCu with 0.40 mGy under the condition of 200 cm and 90 kV 0.3 mmCu in Skull AP with the lowest value of 0.24 mGy under the condition of 140 cm. It was observed that entrance surface dose decreased the most when was increased by 150 cm, 70 kV (C-spine lateral), 81 kV (L-spine lateral). It was also found out that as the between the focus-detector increased in the expansion of the video decreased but the difference was not significant when the distance was 180 cm or more. Skull AP showed the most reduction in the entrance surface dose when the tube voltage was changed by 80 kV, 0.1 mmCu, and 120 cm. Therefore, when using the automatic exposure control device, it is recommended to use the highest tube voltage if possible and to increase focus-detector distance at least by 150~200 cm in wall and 120~140 cm in table in consideration of the radiotechnologist's physical conditions, and to combine 0.1~0.3 mmCu and higher filters. It is thus expected to reduce patient dose by avoiding distortion of images and reducing the entrance surface dose.

• Korean Security Journal
• /
• no.29
• /
• pp.279-300
• /
• 2011

Countries recognize seriousness and concern about aviation terrorism, try to stamp out of it but aviation terrorism has been increasing in the world. Airport security is completely up to the result of security screening for passengers, check-in baggages and cargo at the check point. To complete effectively human and physical screening at the airport, it is essential to secure modernized screening equipment and specialized security screener, and airport security supervisor to supervising them. In this study, A survey conducted to find out the effect on screening equipment operating factors of airport security supervisor's individual attitude. The results of the study are as follow First, the duty view of airport security supervisor meaningfully affect expertise of screening equipment operating factors, satisfaction, reliability, and education and training, national point of view meaningfullly doesn't affect screening equipment operating factors. Second, the working condition effects on the education and training, if the working condition is getting better, intent to change occupation is getting lower. Third, duty stress meaningfully effects on the intent to change occupation, now airport security supervisor works in poor condition. Therefore, airport security supervisor needs to be prude of protecting the airport from the terrorism and various attacks and various kinds of aviation security regulations and procedures and comply with operating standards and keep the life of the country and its people, and needs to change awareness. And It is nessasary for government or airport authority or airline to prepare countermeasure for the improvement of their labor conditions.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.469-472
• /
• 2010

Purpose: Aplasia Cutis Congenita (ACC) is a rare disease characterized by the focal defect of the skin at birth, frequently involving scalp, but it may affect any region of the body. There are no etiology known but some conditions such as intrauterine vascular ischemia, amniotic adherences and viral infections are associated. The ideal treatment for the ACC is not known. Superficial and relatively small sized defects (< $3{\times}5\;cm$) may heal spontaneously and large defects related with risks of infection and bleeding may require aggressive surgical treatment. Hyalomatrix$^{(R)}$ is a bilayer of an esterified hyaluronan scaffold beneath a silicone membrane. It has been used as a temporary dermal substitute to cover deep thickness skin defect and has physiological functions derive from the structural role in extracellular matrix and interaction with cell surface receptor. This material has been used for the wound bed pre-treatment for skin graft to follow and especially in uncooperative patient, like a newborn, this could be a efficient and aseptic way of promoting granulation without daily irritative wound care. For this reason, using Hyalomatrix$^{(R)}$ for the treatment of ACC was preferred in this paper. Methods: We report a case of a newborn with ACC of the vertex scalp and non-ossified partial skull defect. The large sized skin and skull defect ($6{\times}6\;cm$) was found with intact dura mater. No other complications such as bleeding or abnormal neurologic sign were accompanied. Escharectomy was performed and Hyalomatrix$^{(R)}$ was applied for the protection and the induction of acute wound healing for 3 months before the split-thickness skin graft. During the 3 months period, the dressing was renewed in aseptic technique for every 3 weeks. The skin graft was achieved on the healthy granulation bed. Results: The operative procedure was uneventful without necessity of blood transfusion. Postoperative physical examination revealed no additional abnormalities. Regular wound management was performed in out-patient clinic and the grafted skin was taken completely. No other problems developed during follow-up. Conclusion: Hyalomatrix$^{(R)}$ provides protective and favorable environment for wound healing. The combination of the use of Hyalomatrix$^{(R)}$ and the skin graft will be a good alternative for the ACC patients with relatively large defect on vertex.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.583-590
• /
• 2009

Purpose: In the cases of a vascular compromised condition in an injured lower extremity, soft tissue coverage with free tissue transfer presents a challenging problem to the reconstructive surgeon. For this reason, cross - leg flaps are still used in unusual circumstances. Advances in surgical technique has made the cross - leg free flap possible although it may require long operation time along with significant donor site morbidity. Therefore, a pedicled cross - leg muscle flap may be an alternative treatment modality when local flap or free flap is not possible. Methods: Twelve patients(9 males and 3 females) underwent the operation between October of 2001 and December of 2008. The patients' age ranged from 6 to 82 years. The unusual defects included the regions such as the knee, popliteal fossa, distal third of the tibia, dorsal foot, and the heel. Indications for the cross - leg gastrocnemius flap are inadequate recipient vessels for free flap(in eight cases), extensive soft tissue injuries(in three cases) and free flap failure(in one case). The muscle flap was elevated from contralateral leg and transferred to the soft tissue defect on the lower leg while both legs were immobilized with two connected external fixator systems. Delay procedure was performed 2 weeks postoperatively, and detachment was done after the establishment of the adequate circulation. The average period from the initial flap surgery to detachment was 32 days (3 to 6 weeks). Mean follow - up period was 4 years. Results: Stable coverage was achieved in all twelve patients without any flap complications. Donor site had minimal scarring without any functional and cosmetic problems. No severe complications such as deep vein thrombosis or flap necrosis were noted although mild to moderate contracture of the knee and ankle joint developed due to external fixation requiring 3 to 4 weeks of physical treatment. All patients were able to walk without crutches 3 months postoperatively. Conclusion: Although pedicled cross - leg flaps may not substitute free flap surgery, it may be an alternative method of treatment when free flap is not feasible. Using this modification of the gastrocnemius flap we managed to close successfully soft tissue defects in twelve patients without using free tissue transfers.

• Membrane Journal
• /
• v.16 no.4
• /
• pp.268-275
• /
• 2006

Novel SILEMs were prepared by multi-stage phase separation process combined by the low temperature phase separation (LTPS) and the high temperature phase separation (HTPS) using room temperature ionic liquids (RTILs) which have a high ionic conductivity. PVDF and imidazolium series ionic liquids were used as membrane material and electrolyte, respectively. To study the ion conducting properties, the SILEMs were tested using LCR meter at temperature controlled from 30 to $130^{\circ}C$. Under humid conditions, with increasing temperature from 30 to $100^{\circ}C$, the ion conductivity of the cast $Nafion^{(R)}$ membrane increased linearly, but then started to decrease after $100^{\circ}C$. However, in the case of the SILEMs, with increasing operating temperature, the ion conductivity increased. Also, the ion conductivity behaviors of the SILEMs were almost same, regardless of humidity. The ion conductivity of the SILEMs was $2.7{\times}10^{-3}S/cm$ and increased almost linearly up to $2.2{\times}10^{-2}S/cm$ with increasing temperature to $130^{\circ}C$. The effects of an inorganic filler on the physical properties of the SILEMs were studied using the $SiO_2$. The addition of $SiO_2$ could improve the mechanical strength of the SILEMs, though the ionic conductivity was decreased slightly.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.1
• /
• pp.21-28
• /
• 2006

We investigated the mobilization of Cd, Pb, and Cr in two different soils in response to sorption capacities and competition for available sorption site while they moved under saturated water conditions. Two soil samples that were clay and sandy clay loam were collected within 20 cm from the upland surface. To do this, we used three different systems of heavy metal combinations such as single, binary, and ternary as solution phase. And then we observed the breakthrough curve (BTC) and elution as a function of pore volume by applying heavy metal solution and displacing K solution until these curves reached to maximum and minimum. The results showed that BTC and elution curves were not symmetric and it required more pore volumes with increasing species of heavy metals in solution phase, as well as longer tailings. Compared the areas over and under BTC and elution curve, relatively small amount of heavy metal was displaced by K even though there were differences in electronegativity among heavy metals. Conclusively, we assumed that heavy metals transport in soil could be influenced by soil physical nonequilibrium and chemical equilibrium in solution as far as there were more than two species of heavy metals existed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.229-229
• /
• 2010

With the scaling down of ultra large integrated circuits (ULSI) to the sub-50 nm technology node, the need for an ultra-thin, continuous and conformal diffusion barrier and Cu seed layer is increasing. However, diffusion barrier and Cu seed layer formation with a physical vapor deposition (PVD) method has become difficult as the technology node is reduced to 30 nm and beyond. Recent work on self-forming barrier processes using PVD Cu alloys have attracted great attention due to the capability of conformal ultra-thin barrier formation using a simple technique. However, as in the case of the conventional barrier and Cu seed layer, PVD of the Cu alloy seed layer will eventually encounter the difficulty in conformal deposition in narrow line trenches and via holes. Atomic layer deposition (ALD) has been known for its good step coverage and precise thickness control, and is a candidate technique for the formation of a thin conformal barrier layer and Cu seed layer. Conformal Cu-Mn seed layers were deposited by plasma enhanced atomic layer deposition (PEALD) at low temperature ($120^{\circ}C$), and the Mn content in the Cu-Mn alloys were controlled form 0 to approximately 10 atomic percent with various Mn precursor feeding times. Resistivity of the Cu-Mn alloy films decreased by annealing due to out-diffusion of Mn atoms. Out-diffused Mn atoms were segregated to the surface of the film and interface between a Cu-Mn alloy and $SiO_2$, resulting in self-formed $MnO_x$ and $MnSi_xO_y$, respectively. No inter-diffusion was observed between Cu and $SiO_2$ after annealing at $500^{\circ}C$ for 12 h, indicating an excellent diffusion barrier property of the $MnSi_xO_y$. The adhesion between Cu and $SiO_2$ was enhanced by the formation of $MnSi_xO_y$. Continuous and conductive Cu-Mn seed layers were deposited with PEALD into 32 nm $SiO_2$ trench, enabling a low temperature process, and the trench was perfectly filled using electrochemical plating (ECD) under conventional conditions. Thus, it is the resultant self-forming barrier process with PEALD Cu-Mn alloy film as a seed layer for plating Cu that has further potential to meet the requirement of the smaller than 30 nm node.