• Korean Parent-Child Health Journal
• /
• v.5 no.1
• /
• pp.1-23
• /
• 2002

The purpose of this study was to find out the effect of in-service education on the nurse-newborn play interaction. The research design adopted the pre-experimental design applied only for one pretest-posttest group and Barnard's mother-infant interaction model was used as a conceptual framework. The subjects were 26 nurses who were selected from 2 nurseries in general hospital in Pusan, and 52 healthy newborns who were after 4 days from birth during data collection period at the same hospital. The data were collected from June 1st to October 5th in 2001, by video-taping for the interactive behaviors between the nurse and the newborn, played for 5 minutes in nurseries 2 weeks before and after in-service education. The in-service education consisted of the newborn's behavior responses focused on the newborn baby's states, behavior, cues and state modulation, 3 times per 1 week, 90 minutes per 1 time, lecture, demonstration and hand out project. The experimental tool used for this research was Ha Young-Soo's Korean translation of the Maternal-Infant Play Interaction Scale by Thompson, Jody Baird, Sara Gordman, Bryant(1982), some parts of which were adapted to be suitable for the purpose of this research. Mother and baby scale by Wolke & James-Roberts(1987) was also modified and used as the criterion of nurse's perception of a newborn baby. The results of this study were as follows: 1. This result supported the major hypothesis : After the intervention of in-service education, the nurse and newborn play interaction was promoted. 2. After intervention of in-service education, the nurse perception of newborn, especially the criteria of newborn's reaction was promoted., The results of this research confirm that in-service education on the newborn's behavior responses such as states, behavior, cues and state modulation is an effective way to improve the interaction between the nurse and the baby. It elevated the nurse's sensitivities to the baby's needs. Therefore, in-service education can change the conditions of current nursing practice mostly centered on physical care into a better one in which nurses consider the emotional, social, and intellectual development stages of babies. Accordingly, in-service education contributed to promoting the effective nurse-newborn play interaction so positively.

• Polymer(Korea)
• /
• v.33 no.6
• /
• pp.561-568
• /
• 2009

Small injection molded articles are generally molded by multi-cavity injection molding. The most important thing in multi-cavity molding is flow imbalance among the cavities because it affects the physical property and the quality of products. The cavity filling balance can be achieved by flow balance in the runner through the thermal balance. In this study, novel screw type runner or helical type runner has been developed for the flow balance in the runner and performed experiment and computer simulation. Flow balance has been observed using various screw type runners for several resins such as amorphous and crystalline polymers including low and high viscosities grades. Flow balance experiments have been performed for various injection speeds since the flow balance can be affected by injection speed among the injection conditions. Experimental results have been compared with computational results and they showed good agreement. The cavity filling balance can be achieved by the screw runner where the temperature distribution is uniform through the circulation flow along the screw channel in the screw runner. It has been verified that the novel screw runner is very effective device in flow balance in the multi-cavity injection molding. cavity filling imbalance, multi-cavity injection molding, runner design, screw runner, thermal balance.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.31 no.1
• /
• pp.1-19
• /
• 2018

Objectives: The purpose of this study was to investigate the changes of early puerperium symptoms and Blood Stasis Index in women during the first two weeks after childbirth. Methods: 38 women staying at Korean postpartum management facilities were studied. Questionnaires were filled out on the date of arrival and departure. Changes in overall physical conditions including neuropsychiatric, circulatory, digestive, musculoskeletal, and urogenital and breast symptoms as well as Blood Stasis Pattern were studied. Results: 1. Neuropsychiatric symptoms were shown in order of Depressed Feeling, Insomnia, Dizziness, Headache, and Easy to Anger and Nervous on arrival. All symptoms showed improvement after two weeks, without significance. 2. Circulatory symptoms were shown in order of Excessive Sweating, Edema, Fatigue, Hot Flash, Anemic Feeling, Alternating Chills and Fever, Cold Hypersensitivity, Chills, Oppression in the Chest, and Palpitation on arrival. Hot Flash, Excessive Sweating, and Edema showed significant improvement after two weeks. 3. Digestive symptoms were shown in order of Dyspepsia, Dry Mouth, Constipation, and Loss of Appetite. All symptoms showed improvement after two weeks, without significance. 4. Pain of Muscles & Joints showed improvement after two weeks, without significance. Pain of Teeth & Gingiva showed slight worsening after two weeks, without significance. 5. Urogenital and Breast symptoms were shown in order of Wound Pain, Fever and Distending Pain in the Breast, and Lower Abdominal Pain on arrival. All symptoms showed significant improvement after two weeks. 6. Blood Stasis Index showed significant improvement after two weeks. Conclusion: Most symptoms were improved in women staying at Korean postpartum management facilities for two weeks. Hot Flash, Excessive Sweating, Edema, Wound Pain, Lower Abdominal Pain, Fever and Distending Pain in the Breast and Blood Stasis Index showed significant improvement.

• Journal of the Korean Magnetics Society
• /
• v.10 no.4
• /
• pp.165-170
• /
• 2000

The purpose of this study is to investigate the effect of annealing conditions on physical and magnetic properties of Fe-Hf-N thin films. When the thin films were annealed in $N_2$ gas, a surface oxide layer, comprised of Fe$_2$O$_3$ and Fe$_3$O$_4$, was formed at the surface of the thin films and a Fe-Hf-O-N layer was also formed under this surface oxide layer. It was found that the thicknesses of the surface oxide layer and the Fe-Hf-O-N layer increased, as the annealing temperature increased. It was also found that if the thickness of the surface oxide layer was excluded in the property calculation, the soft magnetic properties of the annealed thin films were not much different from those of the as-deposited thin films. Therefore, it was suggested that the Fe-Hf-O-N layer formed under the surface oxide layer did not lose significantly the soft magnetic properties of the Fe-Hf-N films and the Fe-Hf-N films annealed in $N_2$gas showed the soft magnetic properties of the Fe-Hf-N and Fe-Hf-O-N multi-layers.

• Journal of Korea Water Resources Association
• /
• v.47 no.11
• /
• pp.1007-1015
• /
• 2014

This study investigates the discharge coefficient of Improved-Pneumatic-Movable (IPM) weir through the weir, a kind of movable weirs, to estimate much more accurate rating curves using laboratory flume experiments. The discharge coefficient ($C_d$) is from 0.613 to 0.634 by the stand-up angle of the weir. The upstream Froude Number ($F_{r1}$), relative crest length(${\xi}$), Headwater Ratio ($H_1/W$), the Overflow depth ratio of weir crest ($y_c/y_1$) was changed by the upstream. And the downstream Froude number ($F_{r2}$), the Overflow depth ratio of weir crest and Downstream Water depth ($y_c/y_2$) was changed by the downstream. The ratio of Downstream and Up and Downstream water Depth (${\Delta}y/y_2$) was found to be changed by both of the up and downstream flow. They considered the major influence variables and derived the Discharge coefficient Formula at this study. The Discharge coefficient of the Improved-Pneumatic-Movable (IPM) weir was settled by the height of the Movable weir, that is to say, it was settled by the flow conditions of upstream approach flow head and physical data according to the standing angle.

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.690-698
• /
• 2015

Effects of roasting on physical (weight, volume, density and color) and chemical properties (total phenol, caffeine, chlorogenic acid and antioxidant properties) of three Arabica coffee beans (Brazil Bourbon, Indonesia Mandheling and Kenya Tatu) were investigated. A steady weight loss, volume increase, and bean density decrease were observed during the roasting process. The $L^*$, $a^*$, and $b^*$ values tended to decrease as the roasting temperature and time increased. Caffeine level was approximately 0.73% in green beans, and increased to 40-67% for darker roasts. Green beans contained the highest chlorogenic acid content, which decreased as the roasting temperature and time increased. The light- and medium-roasted coffee showed the highest total phenolol contents. The antioxidant activities were measured using DPPH and ABTS. The light-roasted coffee beans showed the highest antioxidant activities, and an approximately 36-51% loss in antioxidant activity was observed after further roasting. The flavor patterns of roasted coffee beans were analyzed using an electronic nose system based on gas chromatography. This analysis demonstrated that an electronic nose system can be applied to identify the green bean variety and the degree of roasting.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.976-982
• /
• 2016

Seaweed has high growth rate, low land usage, high CO₂ absorption and no competition for food resources. Therefore, the use of lignin-free seaweed as a raw material is arising as a third generation biomass for bioethanol production. Various pretreatment techniques have been introduced to enhance the overall hydrolysis yield, and can be categorized into physical, chemical, biological, enzymatic or a combination. Thermal acid hydrolysis pretreatment is one of the most popular methods to attain high sugar yields from seaweed biomass for economic reasons. At thermal acid hydrolysis conditions, the 3,6-anhydro-galactose (AHG) from biomass could be converted to 5-hydroxymethylfurfural (HMF), which might inhibit the cell growth and decrease ethanol production. AHG is prone to decomposition into HMF, due to its acid-labile character, and subsequently into weak acids such as levulinic acid and formic acid. These inhibitors can retard yeast growth and reduce ethanol productivity during fermentation. Thus, the carbohydrates in seaweed require effective treatment methods to obtain a high concentration of monosaccharides and a low concentration of inhibitor HMF for ethanol fermentation. The efficiency of bioethanol production from the seaweed biomass hydrolysate is assessed by separate hydrolysis and fermentation (SHF). To improve the efficiency of the ethanol fermentation of mixed monosaccharides, the adaptation of yeast to high concentration of sugar could make simultaneous utilization of mixed monosaccharides for the production of ethanol from seaweed.

• Journal of the Korean Society of Food Culture
• /
• v.4 no.1
• /
• pp.71-82
• /
• 1989

While ruling Chosun, with a view to making Chosun the primary supplier of food, Japan made the peasantry of Chosun go to ruin by leaving land from them through land enterprises, and the projects of increasing rice production. At the same time, Japan formed the higher classes comprising pro-Japanese capitalists, landlords and intellectuals, and protected them in order to carry out her colonial policies. Naturally there came into being a great gulf between the minority of high society and the majority of the poor in Chosun. As there was a great difference in food life between the two, I'm going to examine the literature of those days to grasp exactly the condition of their food intake. As for the staple food, out of thirteen provinces in Chosun, 13% lived on only rice and 27% on other minor cereals with no rice. As for the subsidiary food, about thirty percents did not take any animal protein. The examination of intake of nutrition by classes shows that the higher and middle classes took the necessary amount of calorie and protein and that the component ratio of calorie was comparatively properly distributed. The lower classes are defined as those whose monthly income was less than 100 won and the peasantry in general. And again the peasantry are classified into three-high, middle and low-according to their farming conditions. The tenant farmers in Kyeongguido and the peasants of Darli community took enough amount of calorie and protein, but much smaller amount of animal protein. Fire-field farmers led not less miserable food intake than the extremely poor peasants. They seldom lived on rice. Potatoes, oats and millets were their staple food. Lastly, Engel's coefficient for the Tomack-min (the residents in mud huts) who were among the three extremely poor classes, was 73.3%, which was much higher than that of the lower classes in then Japan. Rationed rice and barley were their staple food but the rationed amount was not sufficient to satisfy needs of physical labor. In conclusion, during the period of Japanese ruling of Chosun, the minority of higher and middle classes in Chosun generally took sufficient amount of nutrient, while the status of food intake with poor peasants, fire-field farmers and Tomack-min was extremely miserable.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.7
• /
• pp.5-14
• /
• 2020

Kansai International Airport (KIX) was opened in September 1994. Although 26 years have passed since the completion of the first island, long-term settlement is still in progress. This settlement occurs in the Pleistocene layer. For it is not easy to determine the permeability of the Pleistocene sand layer because the thickness and the degree of fine content in the horizontal direction are constantly changing. In addition, it is also a difficult to predict the interactive behavior of the ground due to the construction of the second phase island adjacent to it. In order to solve this problem, a two-dimensional finite element analysis considering elasto-viscoplastic was performed to evaluate the long-term deformation, including the interactive behavior of the alternating Pleistocene foundation due to the construction of two adjacent reclaimed islands. In general, two-dimensional analysis can be used when a section can represent the entire sections. However, Kansai Airport is an artificial reclaimed island so two-dimensional analysis cannot solve the problem such as the stress deformation in the corners of the island. Additionally, the structure of the actual sub-ground through physical exploration is non-homogeneity and its thickness is also not constant. Therefore, there are limitations for the two-dimensional analysis to explain the phenomena. That is, three-dimensional analysis is strongly required. Due to these demands, the author extended the existing two-dimensional program capable of elasto-viscoplastic analysis to three-dimensional and completed the verification of the three-dimensional program developed through one-dimensional consolidation analysis. In order to demonstrate the validity of the developed 3D program that has been verified, an analysis is performed under the same analysis conditions as the existing research using a two-dimensional program. The effectiveness of the developed 3D numerical analysis program was demonstrated by comparing the analysis results with the 2D results and actual measurement data.

• Convergence Security Journal
• /
• v.17 no.2
• /
• pp.173-183
• /
• 2017

This study is for presenting the factors about success attribution that fit the korean security service conditions and developing the actual analysis of measurement tools by investigating the success factors of the security service agents. To this end, conducted a meeting from the fully open questionnaire at first, and then formed the semi-structured questionnaire, finally carried out the survey from the closed questionnaire and analyzed data from SPSS 21.0, AMOS 21.0 and developed the measurements. It was conducted from December, 2014 to June, 2015. This survey was conducted of 170 security guards after the verification of the content validity though the pilot survey and presented the success attribution factors and standards on the basis of the result form this survey. At the first and second analysis process, the success attribution factors of the guards consisted of inner qualities, external qualities, induction factors for inner qualities, and induction factor for external qualities. On analysis of the final data and documents, however, at the third analysis, the success attribution factors of the guards consisted of 'martial arts and physical ability'(4 questions), 'attitudes to work'(3 questions), 'support for the working environment'(3 questions), 'organized business skills'(3 questions), 'attitudes to the duty'(3 questions), and 'coping with crises(2 questions).