• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.2
• /
• pp.49-54
• /
• 2003

We have investigated the effects of hydrogen annealing on the physical and electrical properties of $SrBi_{2}Ta_{2}O_9(SBT)$ thin films in the Pt/SBT/Si (MFS) structure and Pt/SBT/Pt (MFM) one, respectively. The microstructure and electrical characteristics of the SBT films were deteriorated after hydrogen annealing due to the damage of the SBT films during the annealing process. To investigate the reason of the degradation of the SBT films in this work, in particular, the effect of the Pt top electrodes, SBT thin films deposited on Si, Pt, respectively, were annealed with the same process conditions. From the XRD, XPS, P-V, and C-V data, it was seen that the SBT itself was degraded after $H_2$ annealing even without the Pt top electrodes. In addition, the degradation of the SBT films after $H_2$ annealing was accelerated by the catalytic reaction of the Pt top electrodes which is so-called hydrogen degradation. To prevent this phenomenon, we proposed the alternative top electrode material, i.e. Ir, and the electrical properties of the SBT thin films were examined in the $Ir/IrO_2/SBT/IrO_2$ structures before and after the H$_2$ annealing and recovery heat-treatment processes. From the results of the P-V measurement, it could be concluded that Ir is one of the promising candidate as the electrode material for degradation resistance in the MFM structure using SBT thin films.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.257-263
• /
• 2019

Lightweight geopolymers were fabricated with non-milled IGCC slag and Si sludge as a bloating material. The relationship between addition amount of Si sludge and physical/chemical properties of lightweight geopolymers was investigated. When the geopolymers were made by mixing IGCC slag, alkali activator, and more than 10 wt.% Si sludge, the temperature of the geopolymer pastes reached higher than 130℃ in a few minutes. This exothermic reaction accelerated the geopolymer reaction; however, it was difficult to make geopolymer specimens because of a rapid bloating reaction. Both compressive strength and density of the specimens tend to decrease with an addition of Si sludge; however, there was little difference in both compressive strength and density with addition of Si sludge more than 10 wt.%. Because there was a limit to get low density geopolymers by simply increasing the addition of Si sludge, the control of pore size and distribution of geopolymer is more important by controlling flow rate of the paste through the control of W/S ratio. Therefore, it is important to control process conditions, appropriate W/S ratio for the bloating than the control of Si sludge. The optimum W/S ratio was 0.20 for the addition of Si sludge less than 30 wt.% and W/S ratio should be more than 0.28 for the addition of Si sludge more than 30 wt.%, although there was no practical application in fact.

• The Korean Journal of Emergency Medical Services
• /
• v.8 no.1
• /
• pp.71-86
• /
• 2004

This study selected emergency medical technicians at 24 fire police boxes in Jeonnam in order to examine the relationship between job stress, fatigue and job satisfaction of 119 emergency medical technicians. Data were collected from Apr. 10 to May 9, 2004, questionnaires were mailed and returned by mail. Total 109 questionnaires were distributed and 89 questionnaires were collected and 80 except 9 omitting answers and showing inappropriate answers were used for final analysis. The results of this study are as follows. A. The total mean of areas composing job stress in the degree of job stress of 119 emergency medical technicians was over the average as 2.54 (SD .44) of 4 full marks. According to the degree of job stress by each area, the highest area of job stress was crisis situation (2.98), followed by role conflict as professional job (2.58), social factors (2.57), involvement in organization (2.55). To the contrary, the areas of the lowest job stress were professional knowledge and technique (2.35), psychological burden of medical limitation (2.38), conflicts in personal relationship and services (2.45) and improper treatment (2.53). B. The degree of fatigue of 119 emergency medical technicians by areas was over mean as 2.09(SD .49) of 4 full scores and physical fatigue was highest (2.18), followed by mental fatigue (2.11) and neurosensory fatigue (1.99). C. The degree of job satisfaction of 119 emergency medical technicians was 2.71 of 5 full scores and working condition area (3.70) showed the highest job satisfaction, followed by requirement of organization (2.85) and the lowest job satisfaction area was job itself (2.18), followed by desire for job (2.49). D. According to differences in demographical characteristics of 119 emergency medical technicians, there was no variable of statistical difference at job stress and job satisfaction in significance level .05, but fatigue showed statistical difference at final education (F=2.393, p=.046). E. According to differences related to job characteristics of 119 emergency medical technicians, job stress showed statistical differences at motif of current services (F=4.935, p=.003), fatigue showed those at health conditions (F=2.732, p=.008), job satisfaction at overtime (F=3.038, p.034) and the greatest reason of having job (F=3.217, p=.017), F. As a result of analyzing correlations between job stress. fatigue and job satisfaction of the subject, job stress showed positive correlations (r=.411, p=.000) with fatigue and negative correlation (r=-.267, p=.008) with job satisfaction. Fatigue showed negative correlation (r=-.287, p=.005) with job satisfaction. Therefore, the hypothesis of this study. "There will be relationship between degree of stress, fatigue and job satisfaction of subjects." was supported.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.404-411
• /
• 2012

Tooth impaction is defined as a failure of tooth eruption resulting from the physical obstacles in the eruption path or the abnormal position of the tooth germ. Impaction of mandibular second molar is relatively rare, and it may incite pathologic conditions such as dental caries, periodontitis, or root resorption of adjacent first molar. Thus, early diagnosis and treatment is recommended. In the first case, a 10-year-old male patient, was treated by brass wire to separate the bilaterally impacted mandibular second molars. In the second case, a 12-year-old female patient, was treated with Humphrey appliance for impacted mandibular left second molar, which was detected during a periodical dental examination. In the third case, a 17-year-old female patient with impacted mandibular right second molar, was treated by uprighting spring with mini-implant anchorage around premolar area. In the last case, an 18-year-old male patient, was treated with mini-implant placed on the ramus of mandible connected to the orthodontic buttons bonded on impacted mandibular left second molar by elastic thread.

• Journal of Aquaculture
• /
• v.8 no.2
• /
• pp.85-98
• /
• 1995

In Kunsan coastal areas, there are some plans to construct industrial zone and, it will affect physical and chemical parameters of marine environment of the area. As one of many environmental surveys on the aquacultural farm in Korean west coast, the survey on the bottom sediment characteristics of intertidal farm was conducted from May 1992 to April 1993. Dominant grain size was fine sand $(69-98\%)$ and the pH of sediment was ranged of $7.2\~9.1$. Especially the pH increased after embank was constructed. The water holding capacity was $11.1-28.1\%$ and showed high value in silt and clay area. The COD was 1.27 mg/g dry mud and increased after embank was constructed. The total organic matter content ranged of $0.84-8.11\%$ and the DO absorption was $0\~6.56 mg/g$ dry mud. The value of DO absorption showed low in winter and spring, but high in summer and fall. The total nitrogen and the sulfide were rang of $0\~402{\mu}g/g$ dry mud and $0\~122{\mu}g/g$ dry mud respectively. These values were high in summer and winter season, and higher in upper layer than that of lower layer in general.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.77-85
• /
• 1992

Layer material properties of asphalt concrete changes with climatic conditions. Pavement design and analysis should be performed in the representative climatic condition that gives standard physical properties of pavement layer materials. In this study, an evaluation procedure of pavement design temperature is proposed and programed based on damage effect analysis using fatigue failure criterion. Three regions, Seoul, Daegeon, and Pusan, are chosen to obtain the representative climatic data of South Korea. Domestic pavement design temperature is developed by applying the proposed algorithm to 6 domestic pavement section models with the respective regional climatic data. Asphalt concrete pavement failure criterion is also proposed for the condition of developed domestic pavement design temperature. The design temperature for the region of South Korea is estimated as $l7^{\circ}C$, which is converted to $23.6^{\circ}C$ for the AC surface layer temperature. It is found that the procedure to determine design properties of AC surface layer material at $20^{\circ}C$ gives overestimated results of AC moduli for the domestic pavement system. From the comparison study, it is also found that the estimated pavement design temperature is similar to the result of SHELL Design Chart.

• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.372-379
• /
• 1994

Timber harvesting impacts on soil microbial populations and respiration rates were examined in naturally regenerating trembling aspen(Populus tremuloides Michx.) stands on two contrasting soils, an Omega loamy sand (sandy mixed, frigid Typic Udipsamment) and an Ontonagon clay loam (very fine, mixed Glossic Eutroboralf). Five timber harvesting disturbances were simulated during winter of 1990 and spring of 1991, including commercial whole-tree harvesting(CWH), winter logging trail+CWH, logging slash removal+CWH(LSR), forest floor removal+LSR(FFR), and spring compaction+FFR. Regardless of soil types, total soil respiration rates of each stand decreased slightly or remained the same after harvesting while microbial population increased progressively during the first two years following harvesting. Microbial populations increased more rapidly and constantly at the sandy site than at the clayey site, which may indicate that the soil physical and chemical conditions changed more drastically for microbial activity following timber harvesting at the sandy site than at the clayey site. However, two kinds of treatment applications-three levels of organic matter removal and two levels of compaction-did not result in significant differences in microbial population or total soil respiration rate at each site during the first two post-harvest years. Total soil respiration of the aspen stands, sum of root respiration and microbial respiration, was a poor index for the microbial activity in this study because aspen kept an active root system for the successive root-sprouts even after harvesting, which resulted in a large portion of root respiration in total respiration.

• Progress in Medical Physics
• /
• v.17 no.2
• /
• pp.77-82
• /
• 2006

The image display is an Important component of PACS and of medical digital imaging chain. Displayed image qualify is affected by the physical characteristics of display device, appropriate clinical settings and calibrations, and ambient lighting conditions. The performance of display systems is continuously degraded over time due to luminance deterioration and changes of clinical setting parameters. A routine QC is recommended because the performance of display systems is continuously degraded over time. Ten flat panel monochrome LCD display devices were included in the evaluation of the QC effect. The effect of QC on primary class LCD medical display devices for selected QC tests was evaluated by comparing the performances, luminance response, luminance dependencies, display resolution and display chromaticity in this study, of before and after the calibration procedures. The effects of the QC are significant to luminance response and luminance spatial dependencies test and the other side, are slight to the display resolution and display chromaticity test. A routine QC of display device is essential for the consistency of medical image display and presentation. The study of the QC effects of display devices will play an important role in practical QC procedures of display devices.

• Land and Housing Review
• /
• v.5 no.3
• /
• pp.137-149
• /
• 2014

The authors derived rental housing policy measures that are appropriate for the current conditions of Korean housing supply and demand based on the confirmation of the issues of Korean rental housing system and reviewing implications from review of cases of foreign countries and these measures can be categorized into linkage with the urban regeneration and multi-functional development, acquisition of financial resources, operational management, policy and institutional aspects. For the expansion of supply of rental housing, it is essential to link the rental housing policy with urban regeneration. To pursue regeneration of underdeveloped areas and expansion of supply of rental housing in line with urban regeneration, more development sites should be added. Further, the rental home policy must be integrated into a new paradigm that includes securing commercial viability and providing various residential conveniences through multi-functional development. In addition, diversification of developers of real estates turning away from the existing framework of policy that has been focused only on the state-led housing supply so that local governments and private sector players can take part in. Next, new options for funding the supply of rental housing must be sought. First, raising financial resources sequentially through cyclical development approach could be considered. Or, various funding schemes including utilizing Tax-increment financing (TIF) based on the local tax revenues that will be accrued after the development projects and supply of rental housing. Or there should be various schemes to raise funds including utilization of TIFs that are based on the revenues that will be realized after the development projects and supply of rental housing, or utilizing REITs where funds can be provided through private sector investments. Also, getting out from the planning practice that focused only on physical expansion of supply of rental housing, continual operational management must be performed even after the development. These activities must be supported through establishment of control tower at the national level and continuous attention must be paid even after the development by developing specialized operational management companies that are led by private sector players. Finally, in addition to the hardware support that is focused on the public rental housing only, software support such as conditional provision of housing voucher or tax exemption for low-income classes should be provided, too. In other words, a shift from policies that are supplier-centric to ones that are customer-centric must take place.

• Land and Housing Review
• /
• v.8 no.4
• /
• pp.285-294
• /
• 2017

Recently, as the paradigm of regional development has been transformed into characterization, decentralization and cooperation, small and medium scale development is in the spotlight. In particular, as the transfer of planning authority to local governments accelerates, LH is in the process of seeking to transform itself into a system that is in line with local government demand. The purpose of this study is to elaborate the regional pending projects that meet the demand of the region. The Jeju Special Self-Governing Province is the area where land and housing prices have increased more than three times recently, which is the area of interest in recent years due to the various demand for development projects. Another objective is to establish a local government based on LH's system, it is aimed to derive a collaboration method with local government, province corporation and local researchers. The criteria for deriving the cooperation projects between the local government and LH are basically the ones that can be carried out by LH and future-oriented projects. The process of deriving has undergone the process of statutory planning, unscrupulous plan analysis, and consultation of experts' advisory committees. In order to derive the regional cooperation project, four criteria such as local uniqueness, future possibility, business promotion efficiency, and local cooperation project were set. Major projects of the Jeju Special Self-Governing Province are improvement of the surrounding traffic system, construction of the hinterland due to the construction of the second airport, and establishment of Cruise Port(Jeju Port, Seogwipo Port). The role of each entity in the implementation of regional cooperation projects is as follows. Local government should request subsidies for the projects in case of lack of budget support and secure them through competition with other regions. In addition, it should be responsible for the operation and management of the facility once it has been supported and completed smoothly. The Ministry of Land, Infrastructure and Transport affects each region through approval and subsidy of the development plan. After the development project is completed, it evaluates the development project through monitoring and plays a role of continuously improving the system. As a business operator, the provincial corporation will carry out small-scale projects including non-physical projects such as community participation. In the case of LH regional headquarters, the general manager of the region will establish a comprehensive business plan, secure development availability, and carry out large-scale growth promotion projects.