• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.4
• /
• pp.491-498
• /
• 2018

The cost evaluation for voyage route planning in an ice-covered sea is one of the major topics among ship owners. Information of the ice properties, such as ice type, concentration of ice, ice thickness, strength of ice, and speed-power relation under ice conditions are important for determining the optimal route in ice and low operational cost perspective. To determine achievable speed at any designated pack ice condition, a model test of resistance, self-propulsion, and overload test in ice and ice-free water were carried out in a KRISO ice tank and towing tank. The available net thrust for ice and an estimation of the ice resistance under any pack ice condition were also performed by I-RES. The in-house code called 'I-RES', which is an ice resistance estimation tool that applies an empirical formula, was modified for the pack ice module in this study. Careful observations of underwater videos of the ice model test made it possible to understand the physical phenomena of underneath of the hull bottom surface and determine the coverage of buoyancy. The clearing resistance of ice can be calculated by subtracting the buoyance and open water resistance form the pre-sawn ice resistance. The model test results in pack ice were compared with the calculation results to obtain a correlation factor among the pack ice resistance, ice concentration, and ship speed. The resulting correlation factors were applied to the calculation results to determine the pack ice resistance under any pack ice condition. The pack ice resistance under the arbitrary pack ice condition could be estimated because software I-RES could control all the ice properties. The available net thrust in ice, which is the over thrust that overcomes the pack ice resistance, will change the speed of a ship according to the bollard pull test results and thruster characteristics (engine & propulsion combination). The attainable speed at a certain ice concentration of pack ice was determined using the interpolation method. This paper reports a procedure to determine the attainable speed in pack ice and the sample calculation using the Araon vessel was performed to confirm the entire process. A more detailed description of the determination of the attainable speed is described. The attainable speed in 1.0 m, 90% pack ice and 540 kPa strength was 13.3 knots.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.429-438
• /
• 2014

This study was designed to investigate the effects on anti-oxidative activities and increasing extraction yield of Aralia elata Cortex by gamma irradiation. Electron spin resonance (ESR) analysis as physical techniques for irradiation identification of Aralia elata showed that a pair of peak appeared on a space of 6.0 mT at the left and right of symmetric unspecific central ESR spectrums, confirming that the plant was gamma-irradiated. The optimum extracting conditions for preparing gamma irradiated samples from Aralia elata Cortex were to extract with 50% ethanol for 15 hrs after 10 kGy irradiation. DPPH scavenging activity and ABTS radical cation inhibitory activity of the water and 50% ethanol extracts from non irradiated and irradiated Aralia elata Cortex was very high as over 80% and 98%, respectively, at tested low concentration of $50{\mu}g/mL$. Antioxidant protection factor (PF) as anti-oxidation indicator of lipophilic compounds showed a very high level of activity as 2.18~2.78 PF. As for TBARs, water and ethanol extracts showed high level. Increase of TBARs inhibitory activity of water extracts was not shown by gamma-ray irradiation but ethanol extracts showed slight increasement of TBARs inhibitory activity with 10 kGy gamma-ray irradiation. These results shown confirmed increasement of extraction yield for phenolic compounds and anti-oxidative activity from Aralia elata. Thus, the treatment of gamma-irradiation can be used a way to amplify a solubility for biological active compounds and anti-oxidative activity in plants.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.25-48
• /
• 2004

Structures show the phehomena of deformation and lowering of function with time-lapse by artificial environments and changes of geotechnical conditions or accumulation of initial deformation elements. This study aims the structural assessment of cultural property, Chum-Sung-Dae, located in Kyeongju city, Korea. It was built about 1,300 years ago, and has undergone deformation and ground-subsidence with time-lapse. Non-destructive evaluation techniques were applied to the Chum-Sung-Dae, to protect it from survey Because of this reason, 3D precise laser scanning surveying system was applied to measure the exact size of Chum-Sung-Dae, displacement and declining angles. Geophysical exploration also was applied to study the subsurface distribution of geotechnical parameters or physical properties. Natural frequencies were measured from real and model of Chum-Sung-Dae to study the dynamic characteristics of vibration and/or earthquake load and stiffness of structures.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.4 no.4
• /
• pp.43-61
• /
• 1981

Interest in the Quality of working life is spreading rapidly and the phrase has entered the popular vocabulary. That this should be so is probably due in large measure to changes in the values of society, nowadays accelerated as never before by the concerns and demands of younger people. But however topical the concept has become, there is very little agreement on its definition. Rather, the term appears to have become a kind of depository for a variety of sometimes contradictory meanings attributed to it by different groups. A list of all the elements it if held to cover would include availability and security of employment, adaquate income, safe and pleasant physical working conditions, reasonable hours of work, equitable treatment and democracy in the workplace, the possibility of self-development, control over one's work, a sense of pride in craftsmanship or product, wider career choices, and flexibility in matters such as the time of starting work, the number of working days in the week, Job sharing and so on altogether an array that encompasses a variety of traditional aspirations and many new ones reflecting the entry into the post industrial era. The term "quality of working life" was introduced by professor Louis E. Davis and his colleagues in the late 1960s to call attention to the prevailing and needlessly poor quality of life at the workplace. In their usage it referred to the quality of the relationship between the worker and his working environment as a whole, and was intended to emphasize the human dimension so often forgotten among the technical and economic factors in job design. Treating workers as if they were elements or cogs in the production process is not only an affront to the dignity of human life, but is also a serious underestimation of the human capabilities needed to operate more advanced technologies. When tasks demand high levels of vigilence, technical problem-solving skills, self initiated behavior, and social and communication skills. it is imperative that our concepts of man be of requisite complexity. Our aim is not just to protect the worker's life and health but to give them an informal interest in their job and opportunity to express their views and exercise control over everything that affects their working life. Certainly, so far as his work is concerned, a man must feel better protected but he must also have a greater feeling of freedom and responsibility. Something parallel but wholly different if happening in Europe, industrial democracy. What has happened in Europe has been discrete, fixed, finalized, and legalized. Those developing centuries driving toward industrialization like R.O.K, shall have to bear in mind the human complexity in processing and designing the work and its environment. Increasing attention is needed to the contradiction between autocratic rule at the workplace and democratic rights in society.n society.

• Korea journal of population studies
• /
• v.23 no.2
• /
• pp.167-187
• /
• 2000

The rates and numbers of elderly suicide in Korea have been increased during 1985-1998. This indicates the seriousness of the problems which the elderly are faced with. So many late-life problems may push older people across the edges. Those in unbearable situations may call out fur helps, they may try to cope with various ways, or they may commit suicides. Because it is widely believed that suicide among the elderly can be understood as a personal solution or alternative to late-life problems in old age, the elderly\`s suicides seem to be an appropriate indicator in estimating seriousness of late-life problems. A comparison of the history of suicide research with other populations shows that the several late-life problems have been found with placing an individual elder at risks for increasing suicidal behaviors Research has identified such problems as financial insecurity, retirement, loss of social roles, physical illness, lack of social supports, and loneliness as the problems that increase the incidence of suicidal behavior. Though it is difficult far us to explain and understand the phenomenon of the elderly\`s suicide because of its complexity, we need to ascertain problems and social conditions behind suicides and also to prepare for some appropriate policy-tasks in light of social welfare for the aged, through examining the phenomenon. For explaining the elderly\`s suicide, the theoretical orientations are based on sociological perspectives in the paper. From the standpoints of social integration theory and exchange theory, this study is to examine the relationship between late-life problems and suicide. These two may have been fruitfully employed in conjunction with each other. Finally, this study would identify urgent late-life problems related with the elderly\`s suicide and suggest the relevant policies for Korean elders. Sometime in the near future, the government should be required to provide social welfare programs for the elderly, particularly for those at risk for increasing suicidal behaviors.

• Economic and Environmental Geology
• /
• v.40 no.2 s.183
• /
• pp.141-151
• /
• 2007

This study was focused on iron removal from illite by L-ascorbic and oxalic acids. Iron has been shown as a secondary mineral such as iron oxides and hydroxides in illite ores. It is also known as a primary agent to degrade brightness index of the ores. Methods such as physical separation and chemical leaching with strong inorganic acids have been widely used to remove the iron from the ores. However, these methods are expensive and give rise to environmental problems. In this study, we examined an alternative method using solutions with different set of combination of sulfuric, hydrochloric, L-ascorbic, and oxalic acids. Compared to chemical treatments with only inorganic acids, our results demonstrate that an addition of L-ascorbic acid in inorganic acids results in decreasing both total concentrations of the inorganic acids and time for the treatments. The treatment with 0.15 M L-ascorbic acid and 0.25 M sulfuric acid in solution for 60 min significantly improved the brightness index from 42.4% to 74.4%. This improvement is similar to that of treatment with only 2.5 M sulfuric acid alone for 150 min. Mineralogical and chemical analyses were performed to compare the effect of acid leaching on illite powders. No obvious differences are observed in the mineralogical characteristics and particle size distributions of the samples. These results suggest that the treatment with the addition of L-ascorbic acid in sulfuric acid could effectively remove iron without modifying the physicochemical properties of illite under conditions used in this study.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.77-83
• /
• 2020

A series of foamed plastic sheets containing biomass (as HMR container) were developed via different foaming process temperatures, and their density, porosity, WVTR, and pore morphology were evaluated. Thermal stability of samples during re-heating the food in oven, change in morphology, density, porosity, and WVTR were investigated using a simulated thermal shock process according to MIL-STD-883E assay. As such, the pore size of samples was generally increased with increasing temperature of the foaming process. It can be explained that as foaming temperature increased, the viscosity of molten resins and the repulsive force against pore expansion decreased. In addition, an increase in the thermal shock cycle reduced the pore size and WVTR, while density increased because high temperature treatment that softened the sheet matrix was followed by a low temperature incubation, which contracted the matrix, thereby changing the physical and morphological properties of samples. However, an insignificant change in density was observed and WVTR tended to be decreased, indicating that as-prepared foamed plastic sheets could be used as a high thermal stable container for HMR application. Therefore, it found that the properties of newly developed HMR containers containing biomass were dependent on the foaming process temperature. Moreover, to better understanding of these newly developed containers, further investigations dealing with foaming process temperature based on various food items and cooking conditions are needed.

• Journal of the Korean Society of School Health
• /
• v.12 no.2
• /
• pp.217-230
• /
• 1999

The purpose of this study is to find out problems in obesity management through survey and analysis of the actual conditions from the view of a elementary schools school-nurses and to establish fundamental data for efficient obesity management. The subjects for this study were 313 numbers of elementary school-nurses in Kyung-Sang-Pook-Do. The data were collected through mail questionaries from November 1 to November 30, 1997. The major findings in this survey were as follows: 49.8% of the school-nurses who responded in the survey were in their 30s. The average career was 7.3years. The average service duration in their present school was 2.3 years, 55.6% of them were serving at schools which have less than ten classes total 77.2% of them were serving rural areas, 79.6% of them were serving at schools with fewer than 100 obese students. The total obesity prevalence rate was 11.4%, 13.3% were girls, 9.3% were boys. The measurement of height and weight is performed once a year for all surveyed students (91.7%), but obese students were measured as much five times (51.1%). The rate of obesity management planning was 74.1%, however the rates of evaluation and role assignment were 41. 2%, and 24.3%. 79.6% of the surveyed schools have health education classes for obesity, the rate compared (8.0 periods per year) to the whole of health education (79.1 periods per year) is 10.1%. 99.9% of the schools had counseling rooms for obesity (combined with nursing rooms) but they were used. The roote of individual counseling was 84.3%. The frequency counseling was six times a year for about 15 minutes. Obesity counseling records were kept 93.6% of the time and individual information cards were kept 98.7% of the time. The frequency of parents counseling was 42.8% and the survey shows that the main problem here was insufficient counseling facilities. The frequency of dietary guidance and exercise therapy was 84.3% and the dietary instructor was usually the school nurse at 51.7%. The frequency of obesity student exercise was 1-2 times a week and more-than-10-minutes at a time. They skip rope during the morning self-study class. The number on problem of exercise guidance at 56.2% was students' non-cooperativeness. School-nurses, 87.9%, answered that obesity management at school is necessary and 86.9% mentioned the shortage of obesity related information in present physical exercise books. From the plural responses of executing the obesity management, there are many similar problems: lack of knowledge and non-cooperation in parents at 41.9%, is predominant followed by of knowledge and non-cooperation in the children. The third problem is the lack of funds and facilities.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.2
• /
• pp.160-167
• /
• 1992

The growth of weeds and some other plants has been considered to be inhibited by sicklepod(Cassia tora L.) sharing the habitat. The study was conducted, for the first time, to propose that this phenomenon is not only due to competition for physical and nutritional conditions but also due to allelopathy. In addition, autotoxicity of sicklepod was examined. The results are summarized as follows. 1. Rice sheath length reduced progressively from 18 % to 36 % with increasing the concentration of treating aqueous extracts of sickle pod seeds, but rice germination was not affected. In contrast, radish hypocotyl length was not reduced by the aqueous extract treatment but radish germination was significantly reduced by 66 % at 1 : 10 and 1 : 5 treatment. 2. Total chlorophyll contents in rice seedling decreased from 50 % to 65 % by treatment of seed aqueous extracts diluted from 1 : 50 to 1 : 5 ratio. 3. Aqueous extracts of sicklepod leaves significantly reduced hypocotyl length and fresh weight in radish and germination in rice, but mung bean was slightly affected by aqueous extracts only in fresh weight. 4. Volatiles from fresh, immature seeds with husk reduced the radish germination and seedling growth and radish root growth appeared to be more sensitive to the exposure to volatiles from fresh immature seeds than both germination and hypocotyl growth. 5. Volatiles from sickepod leaves inhibited germination and growth of radish, rice and mung bean, and seedling growth was more sensitive to volatiles from leaves than germination. 6. Volatiles from sicklepod leaves reduced germination and radicle length of sicklepod itself. 7. Collectively, it is concluded that there are water-soluble and volatile substances responsible for allelopathy in sicklepod.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.804-809
• /
• 2015

Since Korea is home to Reticulitermes speratus, a kind of subterranean termites that prefer dark and humid conditions, there have been increasing damages to wooden structures by termites. One noticeable attribute of Korean subterranean termites is that they prefer than Pinus densiflora, the major construction material for Korean traditional houses. And because wide varieties of termites are distributed all over the world, it is not so easy to choose appropriate control methods depending on specific areas. This necessitates careful applications of the following control methods depending on the kinds of termites: fumigation treatment, soil termiticide, preservatives and insect treatment, termite colony elimination system, chemical treatment, and other physical and biological treatment methods. The purpose of this study is to investigate the control effects of environmentally-friendly Alkaline copper quaternary (ACQ), Copper Azole (CuAZ) and Micronized copper quarter (MCQ) on the termites contributing to the damage of wooden structures. It was found in this study that wood with preservative treatment produced a significantly higher termicidal efficacy than untreated wood.