• Physical Therapy Korea
• /
• v.18 no.3
• /
• pp.16-25
• /
• 2011

This study aimed to evaluate factors related to the ability of ambulatory patients with cerebral palsy (CP) to walk over vertical and horizontal obstacles. Twenty patients with spastic CP who were able to walk independently for at least 10 m with or without walking devices were recruited for the study. Participants were required to walk over small obstacles (1, 4, and 8 cm in height or width; total of 6 conditions). A 'fail' was recorded when either the lower limbs or the walking device contacted the obstacle. Linear regression analyses were used to determine the effects of age, sex, walking devices, eyeglasses, subtype (hemiplegia or diplegia), ankle foot orthoses, functional level, and score of body mass index on the ability of obstacle crossing. Fifteen participants (75%) failed to adequately clear the foot or walking device over obstacles in at least 1 condition. The chance of failure in crossing vertical obstacle was affected by the use of ankle foot orthoses, eyeglasses, gender, and CP subtype (p<.05). The failure rate crossing horizontal obstacle was affected by CP subtype. These findings suggest that rehabilitation procedures should (1) consider the clinical characteristics of patients in order to prepare them to be more independent while performing daily activities, and (2) incorporate environmental conditions that patients encounter at home and in the community.

• Journal of the Korean Society of Physical Medicine
• /
• v.8 no.4
• /
• pp.601-608
• /
• 2013

PURPOSE: The purpose of this study was to investigate the effect of distance between trunk and desk on forward head posture and muscle activity of neck and shoulder muscles during computer work. METHODS: Twenty subjects who have healthy conditions were asked to perform computer work in two conditions (distance between trunk and desk was 0 and 15 cm). Forward head angle was analyzed with a SIMI motion analysis system. Surface electromyography recorded the upper trapezius and splenius capitis muscles. The significance of differences in distance between trunk and desk (0cm and 15cm) was tested by paired t-test. The alpha level was set at .05. RESULTS: The results showed that the change of forward head angle was significantly higher during the computer work when the distance between trunk and desk was 15cm than 0cm. The muscle activity of upper trapezius and splenius capitis was also significantly higher during the computer work when the distance between trunk and desk was 15cm than 0cm. CONCLUSION: Our study suggest that the distance between trunk and desk was should minimized for prevention of forward head posture during computer work.

• Journal of Computing Science and Engineering
• /
• v.7 no.3
• /
• pp.168-176
• /
• 2013

Long-term evolution (LTE) is emerging as a major candidate for 4G cellular networks to satisfy the increasing demands for mobile broadband services, particularly multimedia delivery. Multiple-input multiple-output (MIMO) technology combined with orthogonal frequency division multiple access and more efficient modulation/coding schemes (MCS) are key physical layer technologies in LTE networks. However, in order to fully utilize the benefits of the advances in physical layer technologies, the MIMO configuration and MCS need to be dynamically adjusted to derive the promised gains of 4G at the application level. This paper provides a performance evaluation of video traffic with variations in the physical layer transmission parameters to suit the varying channel conditions. A quantitative analysis is provided using the perceived video quality as a video quality measure (evaluated using no-reference blocking and blurring metrics), as well as transmission delay. Experiments are performed to measure the performance with changes in modulation and code rates in poor and good channel conditions. We discuss how an adaptive scheme can optimize the performance over a varying channel.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.310-315
• /
• 2009

Current improvements on the standard of living reduced working hours and increased leisure time. Therefore, people's ideas on life style changed and different demands on residential environment are being made. Residents of apartment want a community facility that enables constant exchange with other residents and supports living. Ideas on how to use physical space to strengthen a community is becoming an issue these days. Community facility plays a crucial role in giving a certain characteristic to the whole apartment and improving the image as a community. It also provides a physical environment and induces active participation of community life from apartment residents. The community facility in an important environment for children, which helps them develop in growth and in society as well. Community facility is a space where children fulfill their curiosity and amusement. Since children are greatly influenced by the physical surroundings, community facility for children should not remain as a space for fun but should change into a space for interaction. This study chose six apartments at Dongtan New Town, located in Hwaseong, Kyunggido. This study focuses on the characteristics of design for children's community facility and would like to make a proposal about future space planning for children's community facility.

• Journal of the Korean Society of Physical Medicine
• /
• v.7 no.4
• /
• pp.423-432
• /
• 2012

PURPOSE: The purpose of this study was to investigate balance changes in young patients with neck pain by comparing postural sway velocity and velocity moment between young patients with neck pain and healthy subjects. METHODS: The cross-sectional study enrolled fifteen young patients with over 3-month duration of the neck pain and twelve healthy subjects between the ages of 20 and 30 years old. All subjects were measured their postural sway velocity and velocity moment during quiet standing with eyes open and eyes closed conditions. We compared the differences of postural sway velocity and velocity moment between neck pain patients and healthy subjects, and between eye open and eye close. RESULTS: Significant differences were evident in the anteroposterior and mediolateral sway velocity, and velocity moment of center-of-pressure (COP) between patients with neck pain and healthy subjects (p<.05), and in patients with neck pain in the eyes open and eyes closed conditions (p<.05). CONCLUSION: These results indicate that the balance of young patients with neck pain was worse than healthy subjects during quiet standing, and was especially lessened in the absence of vision. The finding may inform management program to decrease the balance deficits in young patients with neck pain.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.1
• /
• pp.147-154
• /
• 2018

PURPOSE: This study examined the ability of experimental socks combined with a functional insole to reduce plantar foot pressure in healthy subjects. METHODS: The study enrolled 15 subjects. An in-shoe measurement device was used to measure the peak plantar pressure while walking. The peak forefoot, midfoot, and hindfoot plantar pressure data were collected under two conditions: the subjects were wearing their own socks and while they were wearing the experimental socks. The paired t-test was used to determine the differences in peak plantar pressure between the two conditions at all three positions. RESULTS: Wearing the experimental socks resulted in a significantly higher peak plantar pressure in the medial forefoot and midfoot areas than wearing one's own socks (p<.05), and also in significantly lower peak plantar pressure in the medial and lateral hindfoot (p<.05). However, there were no significant differences of peak plantar pressure between experimental and own socks in middle and lateral forefoot (p>.05). CONCLUSION: The experimental socks combined with a functional insole decreased plantar pressure in the hindfoot and supported the medial longitudinal arch. However, it is necessary to change the design and material of the forefoot area in the functional insole to prevent foot ulcer at that location in people with diabetes mellitus.

• Korean Journal of Occupational Health Nursing
• /
• v.29 no.1
• /
• pp.58-68
• /
• 2020

Purpose: Workers with chronic health problems find it difficult to maintain their work because of socioeconomic difficulties. The purpose of this study was to evaluate the relationships between physical, ergonomic, and mental health hazards in the workplace and chronic health problems of Korean workers. Methods: A total of 28,807 wage workers participated in the study and were selected using the Fifth Korean Working Conditions Survey (2017). Multiple logistic regression analysis was used to determine the associations between physical, ergonomic, and mental health hazards and chronic health problems. Results: Of the participants, 1,220 (4.23%) had chronic health problems. Even after adjusting the general characteristics, vibration, noise, high temperature, low temperature, dust, chemical and cigarette smoke, fatigue and painful posture, dragging or pushing or moving of heavy objects, repetitive hand or arm movements, working with a computer or smartphone, use of internet or e-mail, and anxiety situations increased the risk of chronic health problems. Conclusion: The study reaffirms that exposure of physical, ergonomic, and mental health hazards in the workplace significantly increases the risk of chronic health problems.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.91-95
• /
• 2005

The purpose of this study is to investigate the improvement of fiber surface, physical properties and research the physical properties and dyeability of cotton fabrics treated with KOH solution at low and high temperature. The treatment conditions for mercerization with KOH were changed various temperatures(25, $90^{\circ}C$), concentrations(15, 20, 25, 30%. w/v) and times(30, 60, 180, 300sec). The effects of mercerization after KOH treatment estimated with tensile strength, tearing strength, shrinkage, drape stiffness, moisture regain, fiber surface, and dyeability. The optimal conditions were concentration of KOH 20%, time 180sec in low temperature and concentration of KOH 20%, time 60sec in high temperature. The results are as follows; Tensile strength, tearing strength and moisture regain were much improved than those of untreated cotton fabric. Shrinkage and drape stiffness of KOH treated cotton were more increased at $25^{\circ}C$ than $90^{\circ}C$. Fiber surface showed more rounded shape at $25^{\circ}C$ than $90^{\circ}C$. Dyeability of cotton fabrics improved by KOH treatment.

• Journal of the Korean Society of Earth Science Education
• /
• v.7 no.2
• /
• pp.214-225
• /
• 2014

This study aimed to investigate the high school students' conceptions about the plate tectonics through visual representation. For this purpose, the subjects were 67 students in 11th-grade high schools in Chungbuk. In order to in-depth understand the students' conceptions about plate tectonics, so the investigator conducted a semi-structured interview. The conclusions were as in the following. After learning the plate tectonics, the students had the alternative conceptions associated with terminology, colors' meanings, plate-related melting, plate's movement, plates' boundaries, mantle's physical conditions, driving forces for plate movement, and they had the organic relations about colors' meanings, mantle's physical conditions, and driving forces of plate movement. Also, the visual representation used to teach plate tectonics influenced on the students' responses about terminology, plates' boundaries, plate-related melting and the mantle's physical features, also this study found the factors of visual representation causing the learners to create alternative conceptions. These results implicated the importance of teacher's role in identifying the students' interpretation process on visual representation, and it needed to improve the factors creating students' alternative conceptions about visual representation and to study the factors further.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.266-270
• /
• 2007

Small injection molded articles such as lens and mobile product's parts are usually molded in multi-cavity mold. The problems occurred in multi-cavity molding are flow imbalance among the cavities. The flow imbalance affects on the dimensions and physical properties of molded articles. First of all, the origin of flow imbalance is geometrical imbalance of delivery system. However, even the geometry of delivery system is balanced well the cavity imbalance is being developed. This comes from the unsuitable operational conditions of injection molding. Among the operational conditions, injection speed is the most significant process variable affecting the filling imbalances in multi-cavity injection molding. In this study, experimental study of flow imbalance has been conducted for various injection speeds and materials. Also, the filling Imbalances were compared with CAE results. The dimensions and physical state of multi-cavity molded parts were examined. The results showed that the filling imbalances vary according to the injection speed and flow property of resins. Subsequently, the imbalanced filling and pressure distribution in the multi-cavity affect on the dimensions and physical states of molded parts.