• Korean Journal of Child Studies
• /
• v.13 no.1
• /
• pp.52-64
• /
• 1992

The purpose of this study was to investigate child care activities in day care centers and to evaluate the conditions in order to clarify the phases of our child care activities and to present future directions for desirable child care. The subjects of investigation were 110 day care centers in Seoul authorized by the city administrators until July, 1990. Child care activities were evaluated focusing on the whole development of the child based on developmental, open, interactional and ecological approach that are emphasized in quality child care. By evaluating the actual conditions of child care activities, it was found that child care activities could not be provided at the high quality program because of limitations of personal and physical resources.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.231-236
• /
• 2002

The understanding of underground geologic structures is of great importance for the surface and subsurface constructions, prevention of natural hazards such as land-slides and subsidence, and many other areas. To get the information on the geologic conditions, many of investigations such as geologic survey, geophysical explorations, testings on the physical properties of rocks, drilling tests and logging, and groundwater surveys are usually conducted, and tremendous data are collected accordingly. In general, however, these huge amount of data are interpreted in the individual areas only. If these data are analyzed collectively, much more information on the geologic conditions can be obtained. In this study, 3D visualization of borehole logging data is attempted. Borehole logging data are obtained at the urban subsidence area. To compare the 3D logging data with other geologic and geophysical data such as resistivity tomography data, interface module was developed. The 3D visualization of logging data and the comparison with other data can be helpful for the understanding of underground geologic structures.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1643-1645
• /
• 2000

The effects of pre-sintering and infiltration conditions on the electrical and physical properties of Cu-Cr contact material have been studied. Specimens were prepared by infiltration technique, aiming at the final composition of Cu50w%Cr, with varying pre-sintering and infiltration conditions. It showed that increased pre-sintering temperature had a little influence on the final microstructure of Cu-Cr contact material, but improved the surface morphology of Cr-skeleton resulting in better wettability in the followed infiltration process. It also showed that Cr grain growth and gram shape change became prominent with increasing infiltration temperature and time.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.5
• /
• pp.468-477
• /
• 2012

This study aimed to mix and test mortar incorporating activated Hwangtoh to improve the Hwangtoh brick bond strength of brick structures. To do this, the bond strength correlation of mortar was analyzed by means of materials and experiment factors and levels, and the optimum conditions were suggested after analyzing the physical properties of brick and the mix ratio of mortar and additive. Furthermore, the compressive strength and bond strength were found to be in inverse proportion, and in terms of the materials and mixing level, W/C ratio, substitution ratio of activated Hwangtoh, and fine aggregate grading were shown to have a considerable influence on the strength. In conclusion, the optimum mixing conditions to improve the bond strength are found to set W/C ratio at 65% and replacmenet ratio of activated Hwangtoh at 10%.

• Structural Engineering and Mechanics
• /
• v.33 no.6
• /
• pp.697-708
• /
• 2009

Stresses are solved for two parallel cracks in an infinite orthotropic plate during passage of incoming shock stress waves normal to their surfaces. Fourier transformations were used to reduce the boundary conditions with respect to the cracks to two pairs of dual integral equations in the Laplace domain. To solve these equations, the differences in the crack surface displacements were expanded to a series of functions that are zero outside the cracks. The unknown coefficients in the series were solved using the Schmidt method so as to satisfy the conditions inside the cracks. The stress intensity factors were defined in the Laplace domain and were inverted numerically to physical space. Dynamic stress intensity factors were calculated numerically for selected crack configurations.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2367-2374
• /
• 2013

Lysine (Lys) immobilized on zeolite 4A was prepared by a simple adsorption method. The physical and chemical properties of Lys/zeolite 4A were investigated by X-ray diffraction (XRD), FT-IR, Brunauer-Emmett-Teller (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV-vis. The obtained organic-inorganic composite was effectively employed as a heterogeneous basic catalyst for synthesis of ${\alpha},{\beta}$-unsaturated carbonyl compounds. No by-product formation, high yields, short reaction times, mild reaction conditions, operational simplicity with reusability of the catalyst are the salient features of the present catalyst.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.990-1006
• /
• 1997

This paper describes an interface function and its performance assessment for high-bit-rate digital subscriber line (HDSL) under ATM. The interface of HDSL function of ATM system was achieved by HDSL subscriber physical layer board assembly(HSPA) which was modeled as design standard for ATM. We have presented a new worst case of subscriber line conditions from existing results of investigations on impairments such as crosstalk, impulse noise, longitudinal, power line noise and others. We have measured the maximum service loop length available by HDSL, and found that HSPA, at a 2.048Mbps data transmission, is possible within a carrier serving area(CSA) under the worst case loop noise conditions at an error rate or 10$^{-7}$ on a two coordinated unshielded twisted pairs in the presense of impairments. We conclude tht, in terms of a performance-per-lin simulator, the HSPA is an excellent candidate for HDSL implementation under ATM.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.242-244
• /
• 1996

Platinum thin films were deposited on Si-wafer by DC magnetron sputtering for RTD (Resistance Thermometer Devices). We investigated the physical and electrical characteristics of these films under various conditions, the input power, working vacuum, temperature of substrate and also after annealing these films. The Resistivity and Sheet Resistivity were decreased with increasing the temperature of substrate and the annealing time at $1000^{\circ}C$. At substrate temperature $300^{\circ}C$, input power 7(w/$cm^2$), working vacuum 5mtorr and annealing conditions $1000^{\circ}C$, 240min we obtained $10.65{\mu}{\Omega}{\cdot}cm$, Resistivity of Pt thin film and $3000{\sim}3900ppm/^{\circ}C$, TCR(temperature coefficient of resistance) closed to the bulk value.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.4
• /
• pp.50-55
• /
• 1998

This study was carried out to develop low density board made of rice hull which needs proper use. Urea formaldehyde adhesive(UF) was used. The raw materials were the mixtures of the rice hulls from IllFum, DongGin, ChuChong, etc. The physical and mechanical properties of rice hull insulation board were examined. The results are as follows : For the thickness of 15mm of the low density rice hull board bonded with UF resin, proper manufacturing conditions were $171^{\circ}C$ of hot pressing temperature with thickness bar for optimum density, 12 percent of resin solid contents of rice hull ovendry weight, and 20 minutes of hot pressing time. These conditions meet Korean standards(KS 3201-1982) in relation to free formaldehyde emission, bending strength, water absorption and heat resistance.

• Journal of Korean Society of Water and Wastewater
• /
• v.16 no.6
• /
• pp.655-662
• /
• 2002

Separation characteristics of inorganic particles occurred during heavy rainwater were investigated in DAF (dissolved air flotation) process. In order to remove the inorganic particles effectively, the collision and flotation efficiencies were examined from a hydrodynamic point of view. Generally, the collision efficiency increased with floc size under the variation of fluid dynamic conditions including inertial force. However, more precise model should be required to analysis the collision efficiency expressed both the physical properties for inorganic particles and hydrodynamic conditions for a reactor.